Computer Cooling

ND65C11-17A16 5V 0.50A ultra-thin tablet notebook built-in CPU cooling fan

Original ND55C15-17B12 610-00212 DC5V 0.5A macbook notebook fan

With AM5 processors, excess thermal grease tends to accumulate in the cut-outs at the sides of the heatspreader and may become difficult to remove The NA-TPG1 thermal paste guard keeps your AM5 based AMD Ryzen CPU clean by preventing thermal paste build-up in the cut-outs of the heatspreader Dead-easy installation: Simply put the guard onto your AM5 CPU before applying thermal grease and installing your cooler Risk-free to apply and remove, made from highly heat-resistant polycarbonate 10x NA-CW

Cleaning wipes for removing thermal compounds such as Noctua NT-H2 and NT-H1 Ideal for cleaning the contact surface of the heatsink as well as the heat-spreader of CPUs, GPUs or other chips Pre-moistened with a custom detergent mixture for easy and efficient cleaning Large size (15x12cm) is usually enough to clean both the chip and the cooler Pack contains 20 individually packed wipes

chromax.black edition heatsink cover gives Noctua NH-U14S CPU coolers a sleek, black stealth look Made from high-quality powder-coated aluminium Compatible with Noctua NH-U14S, NH-U14S TR4-SP3 and NH-U14S DX-3647 heat sinks Ideal for matching with Noctua's chromax line fans and anti-vibration pads Easy installation and 6-year manufacturer's warranty

chromax.black.swap edition heatsink cover with swappable inlays (red, blue, green, yellow, black, white) for colour-customising Noctua NH-U14S CPU coolers Made from high-quality powder-coated aluminium Compatible with Noctua NH-U14S, NH-U14S TR4-SP3 and NH-U14S DX-3647 heatsinks Ideal for matching with Noctua's chromax line fans and anti-vibration pads Easy installation and 6-year manufacturer's warranty

Supports Intel Cooper Lake, Ice Lake (LGA 4189) Supports up to 205W TDP Copper Heatsink with Vapor Chamber Base 8600 RPM Blower Fan, 26.25 CFM at Full Duty Cycle Recommended for 1U Server and up

Compatible With: LGA4189-4 Socket, LGA4189-5 Socket Heatsink Material: Aluminum fins Fan Diameter: 60 mm Fan Height: 0.98 in Fan Bearing: Dual ball bearing

Supports Intel Whitley Platform: Ice lake and Cooper Lake Socket LGA4189-4/5 Copper Vapor Chamber Base and Fin Stack Supports up to TDP 205 Watts Recommended for 1U Server and up

Mute 120mm 12cm PWM Cooling Fan Slim 12mm,120X120X12mm DC 12V 0.20A 1400RPM Computer PC Case Chassis Cooler Quiet

MT9 Cooling Master Silicone Paste CPU Paste Thermal Compound Heatsink Cooling Grease Very High Thermal Conductivity(4NB1400793-2)

MSA60 70 EVA4400 Server Cooling Fan 336093-001/399052-001

The Mr. Heater Original 15,000 BTU Electronic Spark Radiant Propane Tank Top Heater delivers reliable, portable heating for outdoor use like construction sites, camping, tailgating and workspaces. Engineered for versatile performance in tough environments, this radiant heater provides direct warmth with adjustable output from 10,000 to 15,000 BTU, ideal for immediate heat without electrical connections. The electronic spark ignition eliminates matches or lighters, allowing quick, hassle-free starts even with gloves in cold conditions. Made with chrome and stainless steel components in Cleveland, Ohio, it connects directly to standard 5-20 lb propane cylinders with tool-free installation and …

This Radiant 30,000 BTU Liquid Propane Vent Free heater is the perfect supplemental heating solution even on the coldest days. This heater is conveniently equipped with a thermostat for superior control of the temperature in your space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide you with years of comfortable and safe heat.

The vent free blower fan kit allows you to take your heat to the next level. Add the accessory to your vent free heater will help move the warmed air around the room for a more even heat. The vent free blower kit is compatible with models manufactured in 2016 to current, either radiant or blue flame, natural gas or propane.

This 30,000 Btu Natural Gas Garage Vent Free heater is the perfect heating solution for your workshop or garage. The glass on the standard vent free unit has been replaced with a metal heat shield for added durability. This heater is conveniently equipped with a thermostat for superior control of the temperature in your work or storage space. Also, with a battery powered electronic ignition, starting it is a breeze - battery included. This unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. A clean burning blue flame tube burner uses the natural convection of the burn to circulate warm comfortable air keeping your tools …

The MrCool LineGuard line set cover is a protective exterior line set cover designed for use with MrCool ductless mini split systems. This set of protective coverings can fit over a total of 12 feet of ductless refrigerant lines. It is easy to install, lightweight and pliable.

Flared Line Set (Not PreCharged Diy)- The MrCool MC50-3858 is an installation kit designed for use with 24k and 36k indoor air handling units. This kit includes an insulated line set with flared fittings and communication wire. Please consult the specifications on your HVAC unit to assure the size of the lines and the flared ends are compatible.

Flared Line Set (Not PreCharged Diy)- The MrCool MC50-1412 is an installation kit designed for use with 18k indoor air handling units. This kit includes an insulated line set with flared fittings and communication wire. Please consult the specifications on your HVAC unit to assure the size of the lines and the flared ends are compatible.

**** Note: this is for 4th Generation, R410a units only **** The MrCool DIY Ductless Split System Line Set (for 9k, 12k and 18k air handlers) is designed exclusively for use with MrCool DIY ductless mini splits. When 1-standard size DIY ductless split system line set is not long enough, 2-standard DIY ductless split system line sets can be combined using a coupler to increase the desired length of the line sets. 3/4 in. UV protective insulation sleeve provides extra protection against sun damage, weather erosion or destruction from animals/rodents.

Flared Line Set (Not PreCharged Diy)- The MrCool MC25-3858 is an installation kit designed for use with 24k and 36k indoor air handling units. This kit includes an insulated line set with flared fittings and communication wire. Please consult the specifications on your HVAC unit to assure the size of the lines and the flared ends are compatible.

Flared Line Set (Not PreCharged Diy)- The MrCool MC25-1438 is an installation kit designed for use with 6k, 9k and 12k indoor air handling units. This kit includes an insulated line set with flared fittings and communication wire. Please consult the specifications on your HVAC unit to assure the size of the lines and the flared ends are compatible.

Flared Line Set (Not PreCharged Diy)- The MrCool MC25-1412 is an installation kit designed for use with 18k indoor air handling units. This kit includes an insulated line set with flared fittings and communication wire. Please consult the specifications on your HVAC unit to assure the size of the lines and the flared ends are compatible.

Condenser Wall Mounting Kit for 24k to 36k BTU MrCool Ductless Split System. Use a MrCool condenser wall mounting kit to elevate your ductless mini-split away from dirt, debris and pests. Painted and easy to install, this sturdy, solid steel bracket can support up to 440 pounds.