Drones

4 channel - 6 axis drone with camera and gyro function Stable in air – Altitude hold function makes it float in air automatically 2.4 GHz controller (needs 3 size AAA batteries (not included)) Four directions 360 degree flip function 1 x DENVER DCH-200

2023 upgraded version with Altitude Hold, which makes the drone can auto hover at a certain height, easier to control and more stable for aerial photography. Ideal toys drone for kids and adults. Build-in 6 axis gyroscope for precise hovering in the sky. A key 360° roll, continuous roll for perfect action and wonderful performance. Various control options for those piloting the X5C. Up, Down, Left, Right, Forward, Backward, Leftward flight, Rightward flight. Using spread spectrum technology for further remote distance, best anti-interference ability, least power consumption. you could fly more helicopters at the same time, its reaction speed is 100 times faster than other radio control.

2023 upgraded version with Altitude Hold, which makes the drone can auto hover at a certain height, easier to control and more stable for aerial photography. Ideal toys drone for kids and adults. Build-in 6 axis gyroscope for precise hovering in the sky. A key 360° roll, continuous roll for perfect action and wonderful performance. Various control options for those piloting the X5C. Up, Down, Left, Right, Forward, Backward, Leftward flight, Rightward flight. New Red Battery Charging Plug, not compatible with the old version. Plus 3.7V 650mAh Battery(4PCS) with 4 In 1 Battery Charger

Small Drone for Kids and Adults: upgraded with multi features, more stable and more suitable for kids and novice users. Ideal drone toy as a birthday or holiday gift. One Key Take-off and Landing function: allow beginner to easy to fly the drone without any skill. One Touch Down function is most important to protect the drone when it is out of control or low battery power, the drone will fly down slowly and land on the ground automatically before the motors stopping. Hover / Altitude Hold Mode: Drone altitude specified a flight mode. Beginners easy to manipulate. Headless Mode makes easier flight: Once the fuselage direction can not be recognized, it can enter headless mode so as to continue …

【TXCO Oscillator】SuperD ELRS 915MHz Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long-range flight. 【ELRS 915M】The first true diversity receiver for the 915MHz frequency bands, with two separate receiving modules working together to improve signal reception quality and overall reliability. The 900MHz radio system exhibits greater diffraction ability due to its lower frequency 【Receivers&Antennas】BETAFPV SuperD 915MHz diversity

【Designed for HD VTX】F4 2-3S 20A AIO V1 Brushless Flight Controller is designed for HD VTX, which features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to prevent screen blackout on the DJI O3 due to low voltage during throttle increase. 【DJI O3 6-pin PMU】It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. And redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning. Newbie friendly. 【20A ESC】The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single

With a 9:4:1 Trust-to-weight Ratio, it is a quad that can be compared to the power of a 5" quad. 12 minutes of flight time ensures the pilot flies and captures maximum footage in one go. The innovative Y-shaped CNC metal support structure can improve the structural strength, torsion resistance, and vibration characteristics of the entire machine compared to aluminum columns, making it respond faster and more smoothly. Rocket engine-inspired duct design improves lateral stability and increases thrust by 400g compared to without a propeller guard, giving the Pavo35 stronger power and a better flying feel. The whoop duct is riveted and assembled, and the new appearance and design concept enables …

The Pavo25 V2, as a Cinewhoop, boasts compatibility with a wide range of FPV cameras and HD VTX systems, making it highly versatile. It offers exceptional mounting capabilities and supports not only O3, Walksnail, and HD VTX installations but also works seamlessly with lightweight cameras such as Naked GoPro 12, Action 2, and InstaGo 3, thanks to the included injection-molded camera bracket. The new shock-absorbing gimbal design is used in combination with the frame, it effectively addresses the issue of video jelly and enhances the stability of FPV cameras. It enables the drone to capture thrilling freestyle scenes at high speeds and output professional-grade aerial footage. Pavo25 V2 whoop …

Pavo20 is an ideal choice for small indoor and outdoor lightweight 2'' DJI O3 cinewhoop under 150g. With its 90mm wheelbase and aggressive power system, its unique whoop duct boosts thrust, also adding a touch of creativity to your shots. Experience the pinnacle of innovation with DJI O3 and embark on a new level of aerial cinematography whether you use the Pavo20 or Pavo Pico. Integrated injection molding HD VTX mounting bracket, has a split design which make it effortless to install for pilots DIY, and explore more possibilities while ensuring HD image quality. The camera side panel and 4-point fixation hole design precisely safeguard the lens, guaranteeing uncompromised lens protection.

【Pavo20 Frame】Integrated injection molding HD VTX mounting bracket eliminates the hassle of adjusting screw tightness, and hassle-free installation. The original transmission antenna can be directly mounted on the frame kit. 【Thickened Whoop Duct】Constructed with a crash-proof PA12 thickened whoop duct. Its reinforced cross-section design enhances the strength and blast resistance, employing the principles of aerodynamics and synergizes flawlessly with an enhanced power system. 【Fixation Design】The camera side panel and 4-point fixation hole design effectively safeguard the lens while allowing for easy installation of ND filters, guaranteeing uncompromised lens protection, and

Built-in carbon fiber for flight controller and reserve a storage room for the antenna, Beta95X V3 frame has a more concise appearance and more convenient for installation. Made of high-quality PA12 material, Beta95X V3 frame kit has high abrasion resistance, toughness, showing excellent impact resistance in drop & impact tests, it also can dampen noise and vibrations, bringing a more durable flight and no fear of damage. Beta95X V3 frame also comes with an EVA foam cushioning design to give pilots more safety flying. Compared with the Beta95X V2 frame, V3 frame kit maintain the "pusher style" design but has higher durability, a concise appearance and easier for installation. Equipped with …

【Equipment】BETAFPV C03 FPV micro camera comes with 1200TVL resolution with Global WDR and 1/3" CMOS sensor, it ensures a high-quality and clear image. 【Performance】2.1mm lens, FOV 160° beyond the wide angle for recording more wide and beautiful scenes. 4:3 aspect ratio, shooting clear dynamic images even in low light conditions, bringing the pilot an excellent visual experience. 【Lightweight】Miniature, and lightweight design, weighing only 1.52g. Completely match with M03 VTX on micro whoop drone quadcopter like Meteor series drones and most of micro whoop drones in the market. Pilots can enjoy good image quality while reducing the weight of the whoop drone.

【Updated Meteor85】Meteor85, a new era of 2S whoop drone comes back with a completely new look and equipment. Perfect balance between performance, weight, durability, and premium build design. Provides pilots with superior performance on freestyle tricks. 【Propulsion System】Fetures an upgraded propulsion system, Meteor85 equips Gemfan 2015 2-blade propellers with 11000KV 1103 motors, it provides pilots with a high-efficiency flight experience and is super suitable for FPV freestyle flight. 【New Frame】Meteor85 frame is designed with a low profile of battery slot height, perfectly suitable for a 450mAh 2S lipo battery, no battery strap is needed, more convenient. The drone's

The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks. It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter. Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones. Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant,…

【Ultra-Powerful】Meteor75 Pro 1S brushless whoop quadcopter is the largest available 1S whoop on the current market. It can offer pilots a faster, more responsive flight experience, and longer flight time, which would be ideal for FPV racing or acrobatic flying indoors or outdoors. 【Frame&Propellers】Meteor75 Pro brushless whoop frame is built for the largest 1S brushless drone quadcopter. Featuring motor holders for convenient installation, and it is perfect for 45mm propellers. This combo performs very precisely, agile, and fantastic flying. It greatly enhances the thrust for 1S whoop. 【Motors&Battery】Meteor75 Pro features updated powerful 22000KV 1102 motors and BT2.0 550mAh

【Upgraded Meteor75】Meteor75, 1S lightweight whoop drone comes back with a completely new look. Equipped with the BT2.0 connector, the lightest F4 1S 5A FC, new 0802SE 19500KV motors, and a C03 FPV camera. With the combination of those electronics and parts, it reaches the best balance between performance, weight, durability, and premium build design. 【F4 1S 5A FC】The flight controller of Meteor75 has been upgraded to F4 1S 5A Serial ELRS V3.0, which can be updated via Wi-Fi or Betaflight serial passthrough. Pilots can flash any version of ELRS RX firmware without updating FC firmware. With a high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the

【F4 1S 5A FC】The flight controller of Meteor65 Pro has been upgraded to F4 1S 5A Serial ELRS V3.0, which can be updated via Wi-Fi or Betaflight serial passthrough. Pilots can flash any version of ELRS RX firmware without updating FC firmware. With a high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the Betaflight Blackbox function. 【Power System】By using the latest 0802SE 19500KV motors and 35mm 3-blade props, this equipment ensures excellent performance of power and thrust. Makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time. 【Frame&Propeller】Meteor65 Pro frame has the same perfect performance as

【Upgraded Meteor65】Meteor65, 1S lightweight whoop drone comes back with a completely new look. Equipped with the BT2.0 connector, the lightest F4 1S 5A FC, new 0802SE 19500KV motors, and a C03 FPV camera. With the combination of those electronics and parts, it reaches the best balance between performance, weight, durability, and premium build design. 【F4 1S 5A FC】The flight controller of Meteor65 has been upgraded to F4 1S 5A Serial ELRS V3.0, which can be updated via Wi-Fi or Betaflight serial passthrough. Pilots can flash any version of ELRS RX firmware without updating FC firmware. With a high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the

【High Output Power】The switchable power of BETAFPV M03 5.8G VTX includes 25mW, 100mW, 200mW and 350mW, achieves long-range flying, provides a stable image and strong transmission for tiny drones to explore more possibilities and fun 【Application】M03 VTX is perfectly suitable for the 65-85mm whoop drone for longer range flying. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G) 【Easy to Install】M03 VTX features a JST0.8 connector, which is compatible with camera like BETAFPV C02 and NewBeeDrone BeeEye, IPX type of antenna can be pluggable to VTX directly. Plug-and-play makes it easy to install without soldering

【CC2500 Chips】BETAFPV F4 1S 5A flight controller comes with the built-in SPI Frsky receiver(CC2500 chip), which is compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. Also, it reserves an SBUS port and a UART port, which is available for the SBUS protocol receiver or other external receivers. 【Gyro&ESC Hardware】We updated the FC with high-quality BMI270 gyro and BB51 ESC hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator. 【8MB BlackBox】Built-in an 8MB flash memory chip dedicated to Blackbox logging. It’s an extremely powerful tool for tuning and troubleshooting an FPV drone. 【Cross Shape】F4 1S 5A AIO

【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance 【ExpressLRS Lite Receiver】BETAFPV ELRS Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications that aims to achieve the best possible link performance in both speeds, latency, and range suit for ELRS TX module, etc 【Performance】Ultralight ELRS Lite receiver has a 2.4Hz SMD ceramic antenna. Your drone can achieve long-range flying with our ELRS Micro TX Module 【Weight&Size】This receiver only

An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system. Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor. Featuring M04 VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2*BT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight. Flying a drone expertly is the first

️【Cetus Pro FPV Kit】BETAFPV Cetus Pro FPV Kit is a brushless whoop drone designed from the ground up for FPV beginners. Auxiliary flight function is available for novices, greatly reducing the threshold of operating. Cetus Pro brushless quadcopter is robust and powerful, allowing you to fly faster, race, and even do freestyle flying. Taking you from ZERO to Super Pilot in one kit ️【N/S/M 3 Flight Modes】Normal/ Sport/ Manual are available, which can satisfy the different needs of pilots and adapt to various flight environments. Meanwhile, these 3 modes all support 3 different speeds in SLOW/MID/FAST ️【Altitude Hold Function】Altitude hold function enables Cetus Pro brushless quadcopter to Auto…

【Equipment】Cetus Pro brushless quadcopter equipped with a Lite 1-2S Pro 12A ESC brushless Flight Controller, 1102-18000KV brushless motors and 40mm 3-blade props. The auxiliary flight function is greatly reducing the threshold of operating, which is capable of performing diverse freestyle tricks. Highly beginner-friendly and training-friendly 【N/S/M 3 Flight Modes】Normal/ Sport/ Manual are available, which can satisfy the different needs of pilots and adapt to various flight environments. Meanwhile, these 3 modes all support 3 different speeds in SLOW/MID/FAST 【Altitude Hold Function】Altitude hold function enables Cetus Pro brushless quadcopter to Auto-Hover. The quadcopter