Other Sound & Hi-Fi

Lightweight Aluminum Bracket with rod support for the Tentacle SYNC E. The special feature here is the 15mm rod support. Simply slide it on and clamp it with the built-in screw. Additionally it can be mounted to any camera rig or directly to a camera with the included 1/4" screw. Idea and design of "The Mad Tentacle Clamp" by Marc-Andre. Exclusively produced by SmallRig.

The SC8 is a premium shielded extension cable for use with the VideoMicro and VideoMic GO microphones. Measuring 6m/20', the SC8 features gold plated contacts for superior audio reproduction.

Muff-style windscreen for the VideoMic, NTG-1 & NTG-2 microphones. Rode DEADCAT Artificial Fur Wind Shield for VideoMic and Shotgun Microphones.

The Rode DeadCat GO wind muff is a furry wind cover for the VideoMic GO, designed for use in windy environments. Its artificial fur is specially designed to minimize wind noise while remaining acoustically transparent.Rode DeadCat GO Specifications:Weight: 15 gDimensions: 180mm H x 70mm W x 70 mm DNoteNOTE: Microphone shown in photo above is not included with purchase. Rode DEADCAT-GO Artificial Fur Wind Shield for VideoMic GO.

Rode offers the DeadCat VMP+, a deluxe furry wind cover for the VideoMic Pro+, designed for use in windy environments.Designed to reduce wind noise when recording outdoors, the DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area, while ensuring a secure fit specifically suited to the VMP+ Microphone.The DeadCat VMP+ is only compatible with the VideoMic Pro+. Rode DEADCAT-VMP+ Furry Wind Cover for the Vidoe Mic Pro+.

RØDE's DeadWombat windshield is designed for minimizing wind noise when recording in high wind conditions using the RØDE Blimp. Its artificial fur is specially designed so as to minimize wind noise while remaining acoustically transparent.Weight: 124.00gDimensions: 515.00 H x 170.00 W x 170.00 D mm Rode DEADWOMBAT Artificial Fur Wind Shield for Blimp.

The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions.The MINIFUR-LAV is supplied in a pack of three. Rode MINIFUR-LAV Artificial Fur Wind Shield for Lavalier Microphones.

The Charge Case is a practical charging solution designed specifically for the Wireless GO II wireless system. It provides a convenient storage and charging option for both the transmitters and the receiver. Equipped with an integrated battery, the case allows for two complete recharges of the system, enabling up to 21 hours of uninterrupted usage.Not only does the Charge Case prioritize functionality, but it also emphasizes durability. Its rugged enclosure ensures reliable protection for the Wireless GO II during transit or storage. The zip system further enhances the security and ease of use, making it an ideal companion for safeguarding and maintaining the Wireless GO II system.Rode WIGOIICHARGINGCASE …

Deluxe Windshield For VideoMic GO IIThe Rode WS12 is a deluxe professional-grade windshield for the RØDE VideoMic GO II microphone. Designed with open cell foam covered by synthetic fur, it is a perfect solution to reduce wind noise and plosives when recording. This also includes a wind seal made of synthetic rubber to block any unused sockets (USB-C or 3.5mm) on the microphone, preventing wind entering the rear of the microphone.Rode WS12 Includes:1 x WS121 x Wind SealRode WS12 Features:High-performance windshield for RØDE VideoMic GO IIFor use in high-wind conditionsAcoustically transparent synthetic furEasy to fit and removeRode WS12 Specifications:Length: 98.5 mmDiameter: 85 …

Suits: NT1-A, NT2-A, NT1000, NT2000, NTK, K2 & Broadcaster Rode WS2 Windscreen for NT2,NT1,NTK,NTV.

Windscreen for Rode NT3 microphone. Rode WS3 Pop Filter and Wind Shield for NT3 Microphone.

Suits: NT5 & NT6 Rode WS5 Pop Filter and Wind Shield for NT5 and NT6 Microphones.

The WS6 Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions. Suitable for the RØDE NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm. Rode WS6 Deluxe Wind Shield for NTG-1, NTG-2 and NTG-4 Microphones.

The WS7 large deluxe windshield is designed to reduce wind noise when recording in adverse environmental conditions. Suitable for the RØDE NTG-3 and any shotgun microphone with a maximum slot length of 186.5mm (7 1/4") and a diameter of 19-20mm. Rode WS7 Deluxe Wind Shield for NTG-3 and Shotgun Microphones.

Shotgun windscreen for the Rode NTG-1, NTG-2, VideoMic microphones. Rode WSVM Pop Filter and Wind Shield for Shotgun Microphones.

The Bellari EQ570 is a solid, well-built four-band EQ that offers extremely low phase shift and gradual curve filters. Since 1989 when Bellari released their first EQ, they believe this is the most musical sounding model they have ever offered.

The MM11 Pro MicMute is a simple device designed to temporarily mute or talk a balanced XLR signal. Very similar to the MM11, but the "PRO" version has push to talk or push to mute switch that allows to unit to do just that. The MM11 Pro will pass phantom power, with no popping on the outputs when switched. Simply press the switch for muting (or talking) and release to hear the signal again (or to mute). The MM11 has a large actuator switch which may be used by hand, or on the floor with your foot.Specifications:Switchable push to talk or push to mute functionPasses Phantom PowerLowers the mic signal about 60 dBSets on a podium or mounts to a Rolls MSC106 Mic Stand Clamp in the event the MM11 …

Rolls MX44 Pro 4 Channel Stereo Mixer is designed to mix up to four stereo line-level signals such as smart phones, instruments, CD players, DVD players, MP3 players, laptop computers, etc. to a single stereo output.Rolls MX44 Pro Features:Four stereo inputs to one stereo outputStereo RCA and 1/8" TRS Stereo high-impedance inputsStereo RCA and 1/8" TRS Stereo high-impedance outputBattery or AC operationRolls MX44 Pro Specifications:Input Impedance: 10K OhmOutput Impedance: 100 OhmConnectors: Input: 4 ea.; RCA and 1/8" (3.5mm)unbal. Output: 1 ea.; RCA and 1/8" (3.5mm) unbal.Power: 9V battery, or Rolls PS27s 15VDC adapter(included)Current Draw: 15mA no loadDC Jack: 2.1X5.5 mm Tip NegativeSignal …

The MS111 is a general-purpose muting switch for microphones and will pass phantom power. It is configurable to be Push to Mute, Release to Mute, Push ON and Push OFF maintained contact. It is the only switch of this kind we know of and is the result of many requests for variations of the popular Rolls MM11 that is push to mute only. The MS111 is configured by a switch accessed on the side that will reverse the action in momentary mode and by moving a wire on the main switch to the side for momentary. Or the center for maintained action. If a particular configuration is desired they may be ordered that way from the factory. Otherwise button down latching is the default from the factory.FeaturesBalanced …

Rolls' SX45 is a two-way stereo crossover with mono sub output. It features a 12dB per octave roll-off, a frequency dividing range of 50Hz to 2.5kHz and clip indication for proper level settings. The crossover's compact size allows for easy mounting in any universal rack tray or install-cabinet, while the external power supply provides clean DC power to the unit for quiet operation.Controls for the SX45 include input level, variable frequency adjustment, and high and low output level. All connections are made via RCA phono jacks. The crossover provides clean, high-impedance audio signals in a compact steel chassis. It is perfect for small sound reinforcement applications like nightclubs or restaurants.…

DAB+ Tuning/ RDS (Radio Data System) Capability For FM Broadcasts/ -80dBm DAB Sensitivity/ 22.2dBf FM Useable Sensitivity/ Includes Remote Control/ Silver Finish

Overcome the challenges of outdoor audio recording with the Rycote 011003 25mm Baby Ball Gag Windshield. This high-quality, low-profile wind diffuser is specifically designed for cylindrical microphones, offering superior wind noise reduction without compromising the audio quality. Constructed from the same durable materials as the standard Rycote windshields, the Baby Ball Gag Windshield is designed to withstand the rigors of outdoor recording. Its unique ball-type design encapsulates the microphone capsule, providing comprehensive protection from wind interference. The Baby Ball Gag Windshield is equipped with a robust grommet that securely grips the microphone body, ensuring a stable fit …

When capturing high-quality audio is paramount, the Rycote 065101 Undercover with Stickies and 30 Fabric Discs for Lavalier Microphones is an indispensable tool. Specifically engineered for use with lavalier microphones, this product is designed to be discreetly placed under clothing, making it ideal for film and television production, live events, and any application where unobtrusive audio capture is required.The Rycote 065101 Undercover pack includes Stickies and 30 fabric discs, providing up to 30 uses. The Stickies are used to securely affix the microphone to the clothing or skin, ensuring a stable and reliable audio capture. A soft, high-quality fabric disc is then placed on top of the …