Other Sound & Hi-Fi Shure

The A120S Accessory in-Line Switch can be used to add an On/OFF, Push-To-Talk, Cough Button, or Transmitter-Relay Keying function to a microphone or other device rated at up to 3 amps ac (0.5 Adc) 125V, non-inductive load. The switch has gold-plated contacts for reliable performance even in low-current circuits. The switch is a double-pole double-throw type for maximum versatility. Its pushbutton combines with a rotary knob to provide either spring-return momentary or locking action.The unit is supplied with a crimp-on strain relief for 6.4mm (0.25-in.) diameter cable and with a flex relief for either large or small diameter cables. The permanently attached belt clip can be rotated on the case …

This unit has a balanced bridging input with 100 kilohm input impedance and 50 dB loss. Use the A15LA to connect high-level line or Aux Outputs to low-impedance microphone inputs. It will attenuate the output from such devices as mixers, tape recorders, tuners, or phono preamps to make them compatible with balanced low-impedance units. The A15LA can be directly connected to either balanced or unbalanced sources. If the source is unbalanced, connect it to pin 3 ("hot") and pin 1 on the A15LA input; no connection is required to pin 2. Shure A15LA Line Adapter, XLRF to XLRM.

The Shure A15RF In-Line RF Attenuator provides all types of balanced audio sys-tems with greatly improved immunity to radio frequency interference (RFI). It is especially useful in applications where balanced audio devices near strong RFI sources, such as AM radio stations, are connected by long cable runs.The A15RF will not degrade system sound quality or alter system frequency response. In cases where interference is present but not audible, the A15RF can improve perceived sound quality by removing low level interference components from the audio signal path. It passes phantom power and is transparent to differential audio signals ranging from DC to 2 GHz.The A15RF is a passive device and …

The Shure A7WS is a windscreen designed for use with the SM7, SM7A and SM7B microphones. Shure A7WS Windscreen for SM7 Series Mic, Gray.

Large foam windscreen for SM81 and SM57 microphones Shure A81WS Large Foam Windscreen for SM81 or SM57 Mic.

Developed by Shure with Rycote®, the A83-FUR Windjammer® is a high-quality synthetic fur cover that fits snugly over the foam windshield and provides an additional 25 dB of wind noise reduction.Works with VP83 and VP83F LensHopper™ microphones. Shure A83-FUR Rycote Windjammer Fur Windshield for VP83 or VP83F LensHopper Mic.

The A85WS windscreen from Shure reduces unwanted breath and wind noise and is available in black. This foam windscreen is intended for use with the following Shure microphones:PGA57SM86SM87AKSM8BETA87ABETA87CKSM9KSM9HSSLX2/SM86SLX2/BETA87ASLX2/BETA87CULXD2/SM58ULXD2/SM86ULXD2/B58ULXD2/SM87ULXD2/B87AULXD2/B87CULXD2/KSM9ULXD2/KSM9HSQLXD2/SM58QLXD2/SM86QLXD2/SM87QLXD2/B58AQLXD2/B87AQLXD2/B87CQLXD2/KSM9ULXD2/K8 Shure A85WS Foam Windscreen.

Kit includes two adapters and a volume control for Shure headphones. Shure EAADPT-KIT Headphone Adapter Kit with 1/4 Adapter, Airline Adapter, and Volume Control.

Universal fit yellow foam sleeves for use with E3c, E4c, E5c, E500, i3c, and i4c in-ear headphones. Once inserted in the ear, the sleeves expand to form a comfortable fit. The package contains 5 pairs. Shure EAYLF1-10 Foam Sleeves for Shure Earphones, 5 Pair, Yellow.

Ready-to-go. Every time. Automatically. GLX-D+ Dual Band Digital Wireless is the perfect solution for musicians and presenters who want to go wireless with confidence and without complexity. With new Dual Band Wireless Technology GLX-D+ can operate in both 2.4 and 5.8GHz more than doubling the available bandwidth while also intelligently avoiding interference for reliable dropout-free audio. Featuring smart rechargeability with up to 12 hours of runtime (improved from prior generation GLX-D) the included lithium-ion battery can be charged multiple ways and offers quick charge capabilities Shure GLXD14+/PGA31-Z3 Dual Band Wireless System with GLXD4+ Tabletop Receiver, GLXD1+ Bodypack Transmitter,…

Ready-to-go. Every time. Automatically. GLX-D+ Dual Band Digital Wireless is the perfect solution for musicians and presenters who want to go wireless with confidence and without complexity. With new Dual Band Wireless Technology GLX-D+ can operate in both 2.4 and 5.8GHz more than doubling the available bandwidth while also intelligently avoiding interference for reliable dropout-free audio. Featuring smart rechargeability with up to 12 hours of runtime (improved from prior generation GLX-D) the included lithium-ion battery can be charged multiple ways and offers quick charge capabilities Shure GLXD24R+/SM58-Z3 Dual Band Wireless System with GLXD4R+ Half-Rack Receiver & GLXD2+/SM58 Handheld …

Velour cushions for SRH1440 Professional Open Back Headphones. Shure HPAEC1440 Replacement Ear Cushions for SRH1440 Headphones, Pair.

The ear cushions serve as direct replacements for lost or damaged ear cushions specifically designed for the Shure SRH1540 Premium Closed-Back Headphones.Shure HPAEC1540 Features:For Shure SRH1540 headphonesFrom AlcantaraQuantity: 1 pair Shure HPAEC1540 Replacement Alcantara Ear Pads (PAIR) for SRH1540.

The Shure PS24US is a replacement power supply for Shure your SLX4, PGX4, or BLX4 wireless receiver. The PS24US is the replacement model for the PS23US power supply.Shure PS24US Specifications:Rated input: 100 - 240 VAC, 50-60 Hz, 150 mA maximum.Rated output: 12 VDC, 400 mALeakage current: less than 30 uAInput cable: 72 inches (1.8 meter) long; two-prong plug North American A.C. plugOutput cable: 72 inches (1.8 meter) long; DC Coax plugDC Coaxial Plug: right-angle female; non-locking; 2.1 mm inside diameter; 5.5 mm outside diameter; tip/center = positive; sleeve = negativeDimensions of power supply plastic enclosure: 2.7" long x 2.1" wide x 1.1" thick; 69 mm x 53 mm x 28 mm; two mounting tabs …

Shure's PS-6 Popper Stopper is widely recognized throughout the recording and post-production communities as the leading tool in pop elimination technology. With a 6" diameter, the highly durable four-layer screen stops plosive consonants such as "p" and "b", while the fully adjustable 14" gooseneck and microphone stand clamp ensure flexibility across any number of applications. Shure PS-6 6 Pop Filter with 4-Layer Nylon Screen, Metal Gooseneck, and Stand Clamp.

Small black foam windscreen for SM84, MX183, MX184, MX185, WL84A, WL183, WL184 and WL185 microphones. (Contains four). Shure RK261BWS Small Foam Windscreens for Select Mics, 4 Pack, Black.

Replacement Windscreen (Pop Filter) for SM7, SM7A and SM7B Microphones. Shure RK345 Replacement Foam Windscreen for SM7 Series Mic.

The Shure RK377 is a replacement kit for their PGA31 headset microphone that is comprised of one clip and 2 foam windscreens. Shure RK377 Replacement Clothing Clip and Two Windscreens for PGA31 Headset Mic.

The Shure RK378 is a replacement kit with clip and 2 snap-fit foam windscreens for SM35 headset microphone. Shure RK378 Replacement Accessory Kit for SM35 Headset Mic.

Shure's True Wireless Secure Fit adapters plug onto any detachable Shure Sound Isolating™ Earphones (sold separately) in place of the cables, and just like that, no more wires connect you to anything. Slip them over your ears, and you're on your way. True Wireless freedom!The RMCE-TW2 affords the user True Wireless control over standard transport features, level control, and starting or ending phone calls without touching your phone or removing your earphones. Voice and touch control are made possible by microphones and a touch sensor in the lobes of the RMCE-TW2 so they stay unobtrusively behind your ear.To make sure your audio is delivered distortion-free, Shure included an integrated …

Universal 3.5mm communication cable with microphone and controls for Shure Sound Isolating™ Earphones featuring selectable operation for both Apple & Android devices with a 3.5mm connection. The inline microphone and remote ensures clarity for calls and voice prompts, and provides volume and playback control. Shure RMCE-UNI SE Earphone Accessory Cable with Mic and Remote.

Designed as a replacement for your OEM battery, providing peace of mind as a backup, the Shure SB900B rechargeable Li-ion battery is compatible with Axient Digital (AD1, AD2 & AD3), ULX-D and QLX-D Wireless, PSM 1000, PSM 900, and PSM 300 (P3RA) Personal Monitoring systems. An SBC800 charger is required for recharging the SB900B.Shure SB900B Includes:SB900A Lithium-Ion Rechargeable BatteryShure SB900B Features:Rechargeable Battery for ReceiversFor Use with P34A, P9RA, PSM1000 & UR5For Use with QLX-D & ULX-DReplaces the SB900Shure SB900B Specifications:Dimensions (HxLxD): 1.25" x 1.98" x 0.67" (31.8 x 50.4 x 17.5 mm)Charge Temperature: 0ºC to 45ºC (recommended)Constant Charge Voltage: …

The Shure SB901A is a replacement rechargeable lithium-ion battery for Microflex® Wireless. Works with MXW1, MXW6, and MXW8 wireless transmitters. Shure SB901A Replacement Lithium-Ion Rechargeable Battery for Microflex Wireless.

SB903 rechargeable lithium-ion batteries unlock real-time battery life and battery health features for SLX-D Digital Wireless transmitters.Note: This product may only be shipped to destinations within the contiguous United States, in accordance with regulations for safe transportation of hazardous materials established by the U.S. Department of Transportation (DOT) and International Air Transport Association (IATA).SpecificationsCharge Voltage: 4.2 V (±0.03 V)Charge Current:SBC10-903: 220 mASBC203: 625 mA (normal)250 mA (reduced)Nominal Voltage: 3.6 VNominal Capacity: 1200 mAhHousing: Molded PolycarbonateCharging Temperature Range:SBC10-903: 50 °F to 113 °F (10 °C to 45 °C)Dimensions …