Drills & Screwdrivers Sumitomo

Taper Length Drill Bit: Letter E (0.2500) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 7/16" (0.4375) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 7/16" (0.4375) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: #7 (0.2010) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 5/32" (0.1563) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 5/32" (0.1563) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 5/16" (0.3125) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 4.20 mm (0.1654) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 4.20 mm (0.1654) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 3/8" (0.3750) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 3/16" (0.1875) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: #3 (0.2130) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 27/64" (0.4219) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 1/8" (0.1250) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 16.00 mm (0.6299) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 16.00 mm (0.6299) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 11/32" (0.3438) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 11/32" (0.3438) Dia, 135 deg, Solid Carbide

Taper Length Drill Bit: 11.00 mm (0.4331) Dia, 135 deg, Solid Carbide

Replaceable-Tip Drills: Minimum Drill Diameter (Decimal Inch): 0.8980; Maximum Drill Diameter (Decimal Inch): 0.9370

Replaceable-Tip Drills: Minimum Drill Diameter (Decimal Inch): 0.8980; Maximum Drill Diameter (Decimal Inch): 0.9370

Replaceable-Tip Drill: 26.81 to 27.8 mm Dia, 3.701" Max Depth, 1-1/4" Straight-Cylindrical Shank

Replaceable-Tip Drill: 25.81 to 26.8 mm Dia, 5.748" Max Depth, 1-1/4" Whistle Notch Shank

Replaceable-Tip Drill: 25.81 to 26.8 mm Dia, 3.622" Max Depth, 1-1/4" Whistle Notch Shank