Electrical Wires & Cables

The Gardner Bender quick and always-reliable crimp-type wire terminals feature color-coded barrels denoting industry standard wire gauge sizes. Available in ring, spade, disconnect and bullet styles. Vinyl insulated barrels provide a high degree of protection and carry a maximum 600V rating.

The nylon snap bushing is used in rough, unfinished holes, converting them into smooth openings to mechanically protect and insulate electrical and telecommunications cables, tubing, rope and utility lines. With multiple locking steps to easily snap into place in a mounting hole that has a panel thickness up to 0.125 inches and a mounting hole diameter of 1.375 inches.

The mess and clutter of cords is no more with the Wiremold CordMate II Cord Cover system. Its stylish design complements most interior decors and is perfect for hiding small bundles of home entertainment cabling, speaker wires, TV/video cabling and home office wiring. Combine with CordMate II Channel and a variety of fittings for a customized project.

Bullet terminals securely attach the female receptacle over the male bullet, while allowing for quick and easy detachment if two wires need disconnected in the future. Often used in automotive applications. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The shorty nylon snap bushing is used in rough, unfinished holes, converting them into smooth openings to insulate and isolate electrical or telecommunications cables as well as low RPM shafts and push-pull rods. The shorty bushing has a reduced depth for use in thin mounting panels and limited internal clearance applications. With a single locking step to easily snap into place in a mounting hole that has a panel thickness of up to 0.0625 inches and a mounting hole diameter of 0.5 inches.

Bullet terminals securely attach the female receptacle over the male bullet, while allowing for quick and easy detachment if two wires need disconnected in the future. Often used in automotive applications. Insulated from the barrel to the receptacle end, fully insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Self-stripping terminals are designed for quick and easy installation. With insulation displacement connectors, no stripping or twisting of wires is required. After wires are inserted, press down fully on the metal contact with pliers to make the connection, then close cover.

Self-stripping terminals are designed for quick and easy installation. With insulation displacement connectors, no stripping or twisting of wires is required. After wires are inserted, close cover and press down fully with pliers so that the metal contact makes the connection. Then insert wire with male disconnect tab into base.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. The piggy back allows more than one wire to be connected. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

These multi range Hex head connectors cover 95 percent of everyday applications making them the simple choice for all of your wire connection needs. Don't worry about using a Hex tool to install you can't over torque this connector because it's patented Hex head design strips out at UL torque saving the wires and your fingers. Inside the connector a zinc plated square wire spring ensures a secure connection that resists corrosion. The thermoplastic shell is designed for long lasting strength and resists chemicals while the deep skirt supports smooth wire entry and coverage of stripped wires. Use for large appliances, timers, indoor lighting, switches, ballasts, junction, air conditioners.

CANTEX EZXKL is a 2-gang blank box cover that is ideal for covering any CANTEX 4 inch square EZ BOX, 4 inch square ENT box or 2-gang ENT box that is not in use. This durable PVC cover will not rust or corrode and the keyhole and notch design makes installation fast, easy and secure.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Insulated from the barrel to the receptacle end, fully insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Sigma's box holders are used to support 1/2-in rigid conduit to a box or metal enclosure with 1/2-in threared knockouts.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Self-stripping terminals are designed for quick and easy installation. With insulation displacement connectors, no stripping or twisting of wires is required. After wires are inserted, press down fully on the metal contact with pliers to make the connection, then close cover.

A section of PVC Schedule 40 conduit which as been heated and bent to effect a 45 degree change in direction in a conduit run. A standard conduit bell is formed on one end while the other end is a spigot (plain) end.

undefined

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Resistant to melting and corrosion, high temperature terminals are ideal for high heat applications such as ovens, motors and light fixtures.

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

Rubber grommets cover and cushion hole openings, protecting the cables and wires that pass through from abrasion or damage from sharp corners or edges.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The nylon snap bushing is used in rough, unfinished holes, converting them into smooth openings to mechanically protect and insulate electrical and telecommunications cables, tubing, rope and utility lines. With multiple locking steps to easily snap into place in a mounting hole that has a panel thickness up to 0.125 inches and a mounting hole diameter of 1 inches.

Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options. Ring terminals include a vinyl insulated barrel for quick and reliable crimp-type wire connections.