Electrical Wires & Cables

SimPush, push-to-install couplings are used to connect PVC conduit without adhesive quickly, firmly, and without tools. These robust connections are rated for direct burial, watertight and concrete-tight.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.

undefined

A section of PVC schedule 40 conduit which as been heated and bent to effect a 90 degree change in direction in a conduit run. A standard conduit bell is formed on one end while the other end is a spigot (plain) end. Both ends are solvent weld. Can be used above ground or buried and are suitable for concrete encasement.

GB's new work single gang switch/outlet boxes are constructed of PVC for greater performance with a lower installation cost. They are designed and listed for use with non-metallic sheathed cable and non-metallic raceway in accordance with Article 314 of the National Electric Code. The box features built-in cable clamps to hold wiring firmly in place.

Raco covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL and CSA listed. All covers have captive device screws.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.

The Sigma ProConnex Snap Lock Saddle Connectors are used to terminate AC, MC, or NM cable to a knockout in a dry location box or enclosure. The Snap Lock design requires no locknut when attaching to the box for faster installation. These connectors are suitable for aluminum or steel cable and conduit. They are of die-cast zinc and spring steel construction

undefined

Sigma's weatherproof closure plugs help keep moisture from the electrical wiring by closing unused holes in weatherproof boxes, extension rings or covers.

A connector used to join lengths of conduit pipe. The fitting consist of two female ends with a center stop. Both pieces of pipe should seat at the stop for proper positioning.

Handy box cover used to close a 4 in. x 2 in. handy box. It is also designed to attach devices in a surface-mount industrial or commercial setting. The captive cover screws provide a straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

Die Cast Zinc

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Raco covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL and CSA listed. All covers have captive device screws.

The Sigma ProConnex Conduit Locknuts are used for securing Rigid conduit, IMC and other threaded connectors to a steel outlet box or metal enclosure. These zinc-plated steel locknuts are recommended for indoor applications.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Rubber grommets cover and cushion hole openings, protecting the cables and wires that pass through from abrasion or damage from sharp corners or edges.

Cantex 5140048 is a 2 in. schedule 40 female adapter used to transition threaded metal or PVC conduit with one end threaded and the other end socket solvent weld.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.

Bullet terminals securely attach the female receptacle over the male bullet, while allowing for quick and easy detachment if two wires need disconnected in the future. Often used in automotive applications. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.