Electrical Wires & Cables

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The flanged spade terminal has similar features to the spade, but with turned up ends that stay secure even if the mount screw loosens. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

4 in. Square Crushed Corner Covers - Raised 1/2 in. Universal for 1 Device: 1 GFCI, 1 Duplex, or 1 Toggle (Insert Plates). RACO® surface covers are used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications. RACO® exposed work covers include required hardware for mounting the receptacle(s) * RACO® exposed work covers meet the requirements of the 2014 NEC Article 250.146(A). No bonding jumper is required for covers with: (1) Crushed corners (2) Two or more device attachment screws (3) A lockwasher or equivalent * Hardware and cover are packed in a poly-bag with printed catalog number, compliances and installation instructions

Adapter used with the hub inside a box or enclosure. The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure.

The butt splice connector allows for quick, easy wire insertion to splice wire during a continuous run. Wires insert from both ends and meet in the middle at the built-in wire stop. The connector must be crimped at both ends. Insulated from the barrel to the receptacle end, fully insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The brand for this item is BURNDY Orders $75 or more ship free This item ships directly from Zoro

CANTEX EZXKL is a 2-gang blank box cover that is ideal for covering any CANTEX 4 inch square EZ BOX, 4 inch square ENT box or 2-gang ENT box that is not in use. This durable PVC cover will not rust or corrode and the keyhole and notch design makes installation fast, easy and secure.

Square single device ring used is with 4 in. square boxes to mount switches, receptacles and devices. The steel cover design provides long-term durability. The slots on the covers compensate for up to 1/2 in. of box misalignment on upright framing members. Additionally, this ring is UL listed for safety.

Unistrut pipe clamps, unless noted are punch press made from hot rolled, pickled and oiled steel plates, strip, bar or coil and conforms to one or more of the following specifications ASTM A1008, A575, A576, A635 or A36. The fitting steel also meets or exceeds the physical properties of ASTM A1011 GR 33. The pickling of the steel produces a smooth surface free from scale.

Rubber grommets cover and cushion hole openings, protecting the cables and wires that pass through from abrasion or damage from sharp corners or edges.

Self-stripping terminals are designed for quick and easy installation. With insulation displacement connectors, no stripping or twisting of wires is required. After wires are inserted, press down fully on the metal contact with pliers to make the connection, then close cover.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Self-stripping terminals are designed for quick and easy installation. With insulation displacement connectors, no stripping or twisting of wires is required. After wires are inserted, press down fully on the metal contact with pliers to make the connection, then close cover.

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Resistant to melting and corrosion, high temperature terminals are ideal for high heat applications such as ovens, motors and light fixtures.

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

Rubber grommets cover and cushion hole openings, protecting the cables and wires that pass through from abrasion or damage from sharp corners or edges.

The butt splice connector allows for quick, easy wire insertion to splice wire during a continuous run. Wires insert from both ends and meet in the middle at the built-in wire stop. The connector must be crimped at both ends. Insulated from the barrel to the receptacle end, fully insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The nylon snap bushing is used in rough, unfinished holes, converting them into smooth openings to mechanically protect and insulate electrical and telecommunications cables, tubing, rope and utility lines. With multiple locking steps to easily snap into place in a mounting hole that has a panel thickness up to 0.125 inches and a mounting hole diameter of 1.375 inches.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.