Electrical Wires & Cables

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Insulated from the barrel to the receptacle end, fully insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

According to energy.gov “The potential energy savings from reducing drafts in a home may range from 5% to 30% per year.” Past methods include messy caulk or expensive boxes. Madison’s new Draft Seal is a simple, cost-effective way to achieve the same results! Simply snap Draft Seal onto any standard new work box, and attach the enclosed seal on the back. The green ring remains visible after dry wall install. Our fast, easy method complies with the IECC building code requirements for thermal performance and air leakage, reducing drafts coming in through outlets, vapors that cause mold inside walls, and sound transmission through walls.

Self-stripping terminals are designed for quick and easy installation. With insulation displacement connectors, no stripping or twisting of wires is required. After wires are inserted, press down fully on the metal contact with pliers to make the connection, then close cover.

This grommets helps protect wire and cable from sharp metal edges as well as eliminating the risk of wire, cord or hose chaffing on applications due to metal drill holes or cutouts. Each rubber grommet is flexible and enables simple installation by easily snapping the rubber grommet directly into the drill hole.

The butt splice connector allows for quick, easy wire insertion to splice wire during a continuous run. Wires insert from both ends and meet in the middle at the built-in wire stop. The connector must be crimped at both ends. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The nylon snap bushing is used in rough, unfinished holes, converting them into smooth openings to mechanically protect and insulate electrical and telecommunications cables, tubing, rope and utility lines. With multiple locking steps to easily snap into place in a mounting hole that has a panel thickness up to 0.125 inches and a mounting hole diameter of 1.75 inches.

Sigma's weatherproof round blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment 4-in round weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Insulated from the barrel to the receptacle end, fully insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

undefined

undefined

Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options.

The octagon extension ring is added to junction boxes to increase wiring capacity. It also provides access for additional conduit runs and electrical wire. The extension ring prevents the need to remove old conduit boxes and wiring from circuits when additional capacity is needed. Additionally, the combination knockouts allow for greater wiring flexibility.

Raised blank industrial surface covers are used to close a square junction box or to attach a device in a surface mount industrial or commercial setting.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The rubber bushing adapts raw-edged holes into smooth openings for cables and other types of wires to pass through. It protects, isolates and insulates while reducing shock and absorbing vibration. This flanged stem rubber bushing is sized to fit a 0.5 inch diameter mounting hole.

Dependable and easy to use, Gardner Bender terminals (and wiring accessories) offer the high quality and application flexibility that professionals demand. Available in a variety of packaging options, look to Gardner Bender for secure wire connection options.

Octagon box is made to install ceiling and wall lighting, fixtures, and fans. Additionally, it also works with convenience outlets and devices. It is made with a combo-head fixture and includes cover mounting screws.

Ace industrial female disconnect nylon red. 0.187 tab.

These nylon cord protectors are strain relief bushings with a right angle opening designed for use with flat cables. By securing the cord at the panel entry point, the cord protector absorbs the forces that are placed on the cord from pulling, pushing and twisting. With this type of cord protector, the cord exits the panel opening at a right angle so that it sits flush against the panel, saving space.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. When crimped and shrunk, heat shrink terminals protect from environmental conditions with an extra strong seal for corrosion resistance and strain relief. Color-coding signifies the correct wire gauge size.

Square electrical box is used to distribute power to a number of electrical devices where multiple conductors runs are split into two or more directions. The combination knockouts allow for greater wiring flexibility on the job. They are designed to work with combination Phillips/Slotted screw heads.

Self-stripping terminals are designed for quick and easy installation. With insulation displacement connectors, no stripping or twisting of wires is required. After wires are inserted, press down fully on the metal contact with pliers to make the connection, then close cover.

Mounts on FS type weatherproof one gang rectangular box. Schedule 40 PVC

CANTEX EZ32DN EZ BOX is a 32 cu. in. 2-gang nail-on electrical switch and outlet box for residential or light commercial new construction (new work) electrical installations. It features 8 wire clamps and enhanced angled nails for easy installation.