Climbing Gear

Standard oval shape suitable for tying in accessories, attaching speed systems etc. The best strength/weight connector on the market, manufactured in France by Peguet. Ideal for any application calling for reliable strength, smallest size and lightest weight. NOTE: Steel maillons are stamped with a “Working Load Limit” (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers. WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done

Triangular shape normally used for attaching main paraglider lines to risers or sometimes used in tow releases. Also suitable for 3 point load. The best strength/weight connector on the market, manufactured in France by Peguet. Ideal for any application calling for reliable strength, smallest size and lightest weight. NOTE: Steel maillons are stamped with a “Working Load Limit” (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers. WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly

Made with Dyneema® The retainer at one end helps maintain the correct orientation of an attached carabiner, such as when used for clipping the rope into the quickdraw as a runner. Product Name Product Code Length Colour Weight Strength Certification 11mm Dynatec Quickdraw Sling SP1118AS 18cm Grey 18g 22kN EN 566:2017, EN 795:2012 (B), UIAA104 11mm Dynatec Quickdraw Sling SP1125AS 25cm Red 24g 22kN EN 566:2017, EN 795:2012 (B), UIAA104 11mm Dynatec Quickdraw Sling SP1112ASGY 12cm Grey 9g 22kN EN 566:2017, EN795:2012 B 11mm Dynatec Quickdraw Sling SP1112ASRD 12cm Red 9g 22kN EN

An adjustable belt with a quick release buckle.

Accessory mini carabiner D shape screw lock suitable as key holder, as device for putting climbing shoes on, for holding some device on your harness etc. This carabiner is not intended for climbing and belaying of persons! Color black + gold/silver Weight 28 g • 1 oz Material aluminium alloy (anodized) Strength major axis 3 kN Gate opening (d) 12 mm

Compact gear carabiner for clearly organized equipment. Compatible with all harness types and suitable for attaching to any part of a harness in any desired number. Maximum load capacity: 5 kg. Suitable for all climbing harnesses Maximum load limit: 5 kg Weight 24 g

OPEN SLING / W2001 Sewed sling versatile use different color according to length also available in black  only Code: length :   color : strength : W2001 Y060 60 cm • 24 in yellow 22 kN W2001 A080 80 cm • 32 in blue 22 kN W2001 R120 120 cm • 47 in red 22 kN W2001 B150 150 cm • 60 in black 22 kN         W2001 B060 60 cm • 24 in black 22 kN W2001 B080 80 cm • 32 in black 22 kN W2001 B120 120 cm • 47 in black 22 kN   Color yellow, blue, red, black Strength 22 kN Width 20 mm Length 60, 80, 120, 150 cm • 24, 32, 47, 60 in

Description Durable construction Rope end of the quickdraw is equipped with a STRING to maintain the proper orientation of the carabiner and help protect the carabiner attachment loop from wear Available in two lengths: 12 and 17 cm Specifications Material(s): polyester, rubber Certification(s): CE EN 566, UIAA References References C041AA01 Length of sling 17 cm Strength 22 kN Weight 22 g

Tubular for their flexibility or flat for their durability, webbings are specifically used in belay slings. Cut webbing must always be tied with a tape knot. Name Flat Tape 18mm Standard EN 565 Certification CE Breaking load 1500 daN (kg) Material Polyamide Weight 37.6 g Tests performed internally not covered by any certification (Except CE) 1800 daN (kg)

Fit & Design: Black Diamond's lightest carabiners constructed for trad climbing Hot forged for a lighter weight Nose geometry allows for easier clipping and unclipping Additional Details: Colors match with Black Diamond's Camalots

Standard oval shape suitable for tying in accessories, attaching speed systems etc. The best strength/weight connector on the market, manufactured in France by Peguet. Ideal for any application calling for reliable strength, smallest size and lightest weight. NOTE: Steel maillons are stamped with a “Working Load Limit” (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers. WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done

The main sling body has a 26mm diameter, making it easy to grab hold of and pull on when working routes. This tapers to 16mm at either end, to securely hold carabiners in the optimum orientation for loading. Supplied with a rubber keeper that keeps the rope end carabiner correctly orientated for easy clipping.

A hyperlight and compact quick link for rigging and rappels. The stainless steel body is harder than traditional Carbon steel so it will hold up to wear and tear from ropes better over time. Not CE certified. Super lightweight carabiner made of stainless steel. Weight: 21g Longitudinal strength: 25kN Clearance: 6mm Dimensions: 50mm x 25mm No CE certification.

Standard oval shape suitable for tying in accessories, attaching speed systems etc. The best strength/weight connector on the market, manufactured in France by Peguet. Ideal for any application calling for reliable strength, smallest size and lightest weight. NOTE: Steel maillons are stamped with a “Working Load Limit” (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers. WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done

GLUE IN ANCHOR / RK703XX10 Stainless steel durable permanent anchor point works also in soft or pocketed stone smooth eye allows safe rope threading for retreat made of welded, grade AISI 316 stainless steel for drilled hole with diameter 12 mm recommended glue: UPM 44 or FIS 360V or alternatively resin capsule RM10 Weight 120 g • 4.23 oz Material stainless steel Length 80 mm (shaft) Diameter 10 mm (diameter of hole for the shaft: 12 mm) Strength major axis 30 kN Strength minor axis 25 kN

Simple leash with minimal weight   suitable for  MERLIN  and  WIZARD  ice axes Weight 24 g (0.85 oz) Material polyamide Strength 1 kN (100 kg)

WEIGHT (GRAMS / OUNCES) 48 g / 1.69 oz­ WIDTH (MM / IN) 26 mm  MATERIAL(S) Nylon / Polyamide STRENGTH (KN) 22 kN

Tubular for their flexibility or flat for their durability, webbings are specifically used in belay slings. Cut webbing must always be tied with a tape knot. Name Flat Tape 18mm Standard EN 565 Certification CE Breaking load 1500 daN (kg) Material Polyamide Weight 37.6 g Tests performed internally not covered by any certification (Except CE) 1800 daN (kg)

Tubular for their flexibility or flat for their durability, webbings are specifically used in belay slings. Cut webbing must always be tied with a tape knot. Name Flat Tape 18mm Standard EN 565 Certification CE Breaking load 1500 daN (kg) Material Polyamide Weight 37.6 g Tests performed internally not covered by any certification (Except CE) 1800 daN (kg)

NLG Non-Conductive D Ring Tool Tethers form part of NLG’s unique Instant Tether System™ for stopping dropped objects and is well established as the preferred option for workers at height. They can be retro-fitted to almost any tool avoiding the unnecessary expense of buying new tools or the associated downtime of sending tools off site to be adapted for tethering. When used with Tether Tape™, the NLG D Ring Tether Points provide a solution to a multitude of tools commonly used at work. This metal-free version is uniquely suited to electrical work or using near sensitive surfaces Non-conductive, lightweight ballistic plastic D Ring Extended product life with high strength, wear

NLG Tether Loops™ create a rapid tether points suitable for any tool with a captive hole or handle – or even a shaped tool. So whether it’s a hammer, saw or spanner, Tether Loops™ are effortless to self-install anywhere at anytime. With its specially developed one-way thread and Lock Alert™ indicator for checking it is correctly installed, NLG Tether Loops™ are a simple and time saving method of creating an attachment point that is approved and third-party tested. Each Tether Loop™ comes with its own unique serial number. A tough aircraft grade steel core with an extended thread mechanism ensures a fail-safe attachment point for tools up to 3kg in weight. Available in three

Bushes Pinto Spacers

NLG Tether Loops™ create a rapid tether points suitable for any tool with a captive hole or handle – or even a shaped tool. So whether it’s a hammer, saw or spanner, Tether Loops™ are effortless to self-install anywhere at anytime. With its specially developed one-way thread and Lock Alert™ indicator for checking it is correctly installed, NLG Tether Loops™ are a simple and time saving method of creating an attachment point that is approved and third-party tested. Each Tether Loop™ comes with its own unique serial number. A tough aircraft grade steel core with an extended thread mechanism ensures a fail-safe attachment point for tools up to 3kg in weight. Available in three

Bushes Pinto Spacers