Climbing Gear Lime

The NINETEEN G is the lightest carabiner in the world - and makes no compromises on strength. Very lightweight construction Lightweight wire gates reduce the whiplash effect in the event of a fall Strong aluminium alloy, special hardening treatment Compact shape and minimal pack size Width: 50 mm Length: 78 mm Gate opening: 17 mm Fmax. major axis: 20 kN Fmax. minor axis: 7 kN Fmax. open: 7 kN Certification: EN 12275 Material: Aluminium Closure: Wire Carabiner shape: Offset D

FEATURES Symmetrical D shape I-Beam construction for optimum strength to weight ratio Wider gate opening of 16mm DMM quality on accessory carabiner Wiregates perform better in snow and icy conditions Dimensions 34 x 60mm Weight 9g   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

The large, shallow baskets provide a similar performance to an oval, while maintaining a bias towards the back of the carabiner to increase strength. Webbing sits comfortably at either end and they work as well with etriers and haul bags as they do on backpack straps. They can accommodate multiple connection points, allow efficient racking of wires and are suitable for use in all conditions from summer trad to winter epics. With a large gate opening and narrow nose the WallDO can be clipped into anything from complicated anchors to tiny pegs. A massive range of colour options make it easy to distinguish gear, or to match your harness or water bottle.

A clean nose stops your keys catching, I-Beam construction brings weight down to a miniscule 8 grams, and colour anodising means the XSRE stands out from the crowd. It even rates to 4kN, more than strong enough for any non-PPE function you can think of.

The perfect mid-size Offset D for situations where small size and volume are important i.e. confined spaces or tower climbing situations where the overall weight and size of a system is crucial. The Shadow gives plenty of security reserves whilst feeling featherweight on a harness or in a bag.

Their shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. Its keylock nose allows snag-free operation. This is the smallest Locksafe gated carabiner that DMM makes and is 14mm shorter than an Ultra O yet still retains a strong construction. Available in standard and removable captive bar versions, with or without iD.

Boasting an impressive 9kN (2023lbf) MBS, the small but mighty hot forged KL100 is the perfect accessory carabiner to provide a direct connection between your chest harness and your SRT system, or for keeping valuable tools safe on a lanyard. Sized between a ‘keyring’ and a full-size carabiner, and featuring gate openings of 15mm (0.59”) and 13mm (0.51”) for the straight and screwgate respectively, the KL100 is capable of a huge range of non-PPE applications and countless other uses! Technical Information (MBS) Minimum Breaking Strength (kN) 9 (MBS) Minimum Breaking Strength (lbf) 2023 Gate opening gap (mm) 13 Gate opening gap (inches) 0.51 Nose type Keylock nose

The removable threaded captive bar helps ensure the correct orientation with lanyards and holds components securely. Made with the same attention to detail as all our standard size DMM carabiners, the XSRE Lock CB is a perfectly formed, high performance accessory clip. It has a functional industrial pedigree, yet crosses over easily into everyday life situations. Widely adopted for non-PPE use on working at height sites, the XSRE is just as useful on a tree care harness to organise gear as it is for clipping keys onto a belt loop.

DMM's patented Taperlock closing mechanism increases gate push-in and cross gate strength using a special flared profile on the nose of the carabiner, as well as allowing a snag free connection for your ropes, slings and devices. Locksafe Auto-locking gate requiring three distinct actions to open. FEATURES Large HMS shape big enough to fit multiple ropes or connections 14mm loading surface for increased wear resistance Keylock clean nose for snag free connection Available with a Durolock gate Easy to use with gloved hands Product Name Product Code Dimensions Weight MBS (Major Axis) MBS (Minor Axis) MBS (Gate Open) Gate Opening Certification

Technical Information (MBS) Minimum Breaking Strength (kN) 25 (MBS) Minimum Breaking Strength (lbf) 5620 Gate opening gap (mm) 19 Gate opening gap (inches) 0.74 Nose type Blind nose Gate/lock type Supersafe Finish Anodized Weight (grams) 86 Weight (ounces) 3