Reels

DEPENDABILITY AND STRENGTH: The PENN Wrath II reel sports a lightweight yet corrosion-resistant graphite body, plus a machined anodized aluminum spool with Line Capacity Rings. Built for ultimate durability. GEAR RATIO OF 5.6:1: Recovers at the rate of 36" | 91cm with every turn of the crank. 2+1 STAINLESS STEEL BEARING SYSTEM: The Wrath II includes two shielded stainless steel ball bearings plus 1 instant anti-reverse bearing to provide smooth and predictable operation when the going gets tough. FELT FRONT DRAG DRAG SYSTEM: Favored for extremely rapid start-ups with a max drag of 20lb | 9.1kg. LINE CAPACITY: The PENN Wrath II Spinning Reel fits Mono Capacity yd/lb: 225/12 200/15 135/20.…

IPX 5 SEALED ALUMINUM REEL SPOOL: Whether it gets hit by the occasional wave or left to ride in the spray, the Spinfisher VII features IPX5 sealing to prevent saltwater intrusion and protect your gearbox and drag against corrosion. PRECISION CNC GEAR TECHNOLOGY: Durable, precise, and smooth. Recovers at the rate of 41.9" | 106.4cm with every turn of the crank. Gear ratio of 5.6:1. A brass main gear increases the reel's life. 6 TOTAL BEARINGS: The Spinfisher VII features 5 stainless steel ball bearings plus 1 instant anti-reverse bearing to provide smooth operation for any saltwater fishing experience. HT-100 FRONT DRAG SYSTEM: Built with carbon fiber washers for a max drag of 30lb | 13.6kg,…

5+1 Bearings Gear Ratio: 4.7:1 Line Capacity: 15/250 Weight: 24 ounces HT-100 drag washers provide smooth drag under heavy loads

LIGHTWEIGHT GRAPHITE FRAME AND SIDEPLATES with aluminum frame rings. The ultralight and versatile PENN Rival Level Wind also features a forged and machined aluminum spool with Line Capacity Rings. AUTO-ENGAGING GEARS with marine-grade bronze alloy main and machine-cut brass pinion gears. Recovers at the rate of 29” | 74cm with every turn of the crank. Gear ratio of 5.1:1. MULTI-STOP BEARING SYSTEM: Time-tested shielded 2-ball bearing system offers control in the heat of battle. HT-100 STAR DRAG DRAG SYSTEM: Built with carbon fiber washers for a max drag of 15lb | 6.8kg, this system will exhaust the fish without wearing you down. Right handle position. LINE CAPACITY: Mono Capacity yd/lb: 47…

Pursuit IV Spinning Black Silver 9.8 oz Pursuit IV Spinning Black Silver 9.8 oz Pursuit IV Spinning Black Silver 9.8 oz Pursuit IV Spinning Black Silver 9.8 oz Pursuit IV Spinning Black Silver 9.8 oz

Pursuit IV Spinning Black Silver 21.4 oz Pursuit IV Spinning Black Silver 21.4 oz Pursuit IV Spinning Black Silver 21.4 oz Pursuit IV Spinning Black Silver 21.4 oz Pursuit IV Spinning Black Silver 21.4 oz

LIGHTWEIGHT AND DURABLE: The PENN Squall II Lever Drag Reel sports a corrosion-resistant graphite frame with palm sideplates, plus a forged and machined aluminum spool with Line Capacity Rings. STAINLESS STEEL MAIN AND PINION GEARS: Recovers at the rate of 36" | 91cm with every turn of the crank. Gear ratio of 5.3:1. 5 STAINLESS STEEL BEARINGS: Multi-stop system with 4 stainless steel ball bearings and 1 silent double-dog anti-reverse bearing provides incredibly smooth operation to keep your focus on the action. DURA DRAG LEVER DRAG DRAG SYSTEM: Powerful PENN Dura-Drag system with a max drag of 20lb | 9.1kg for high-pressure, high-stakes fights. LINE CAPACITY: Mono Capacity yd/lb: 405/25 …

LIGHTWEIGHT AND DURABLE: The PENN Squall II Lever Drag Reel sports a corrosion-resistant graphite frame with palm sideplates, plus a forged and machined aluminum spool with Line Capacity Rings. STAINLESS STEEL MAIN AND PINION GEARS: Recovers at the rate of 59" | 149.9cm with every turn of the crank. Gear ratio of 7.1:1. 5 STAINLESS STEEL BEARINGS: Multi-stop system with 4 stainless steel ball bearings and 1 silent double-dog anti-reverse bearing provides incredibly smooth operation to keep your focus on the action. DURA DRAG LEVER DRAG DRAG SYSTEM: Powerful PENN Dura-Drag system with a max drag of 14lb | 6.4kg for high-pressure, high-stakes fights. LINE CAPACITY: Mono Capacity yd/lb: 715/16 …

PENN BATTLE SPINNING REEL KIT: This kit includes a protective PENN neoprene reel cover and a spare anodized aluminum spool, for the ultimate pairing with our high-performing PENN Battle Spinning Reel. Right/left handle position. SLEEK AND DURABLE: PENN Battle fishing reels feature full metal body construction, site plate and rotor with a heavy duty aluminum bail wire to maintain precision gear alignment in the toughest battles. Size 3000 reel. SMOOTH, EFFICIENT GEARS: Recovers at the rate of 35"/89cm with every turn of the crank. Gear ratio of 6.2:1. Mono Capacity yd/lb: 200/8 165/10 120/12. Braid Capacity yd/lb: 250/15 180/20 130/30. 6 TOTAL BEARINGS: The Battle features 5 stainless steel …

4 Stainless Steel Ball Bearings Machine Cut Stainless Steel Gears on All Sizes Corrosion-Resistant Graphite Frames Oversized Stainless Steel On/Off Clicker Ratchet Cold-Forged, Silver-Anodized Aluminum Spools

Alumilite body, side plate and Cyclonic Flow rotor IPX-7 full body waterproof design for ultimate protection Carbonite high output DFD drag with Cal’s drag grease Specialized titanium spool shaft reduced flex and weight Dual anti-reverse for maximum strength and reliability

Alumilite body, side plate and Cyclonic Flow rotor IPX-7 full body waterproof design for ultimate protection Carbonite high output DFD drag with Cal’s drag grease Specialized titanium spool shaft reduced flex and weight Dual anti-reverse for maximum strength and reliability

Made of highest quality material Manufacturer: Okuma Okuma rtx spin reel 7+1bb 6.0:1 6lb/225Yds Sz30

2 Ball bearing drive for smoothness and longevity Oiled felt drag washers for smooth operation Corrosion resistant graphite body and rotor Rigid aluminum handle design Durable stainless steel bail wire Oiled felt drag washers for smooth operation 2 ball bearing drive for smoothness and longevity Corrosion resistant graphite body and rotor Rigid aluminum handle Backed by a 1 year limited warranty

Stainless Steel main gear for ultimate power and strength Stainless Steel Precision Machine Cut Pinion Gear Stainless Steel Drive Shaft and spool shaft CRC- Corrosion Resistance Coating ALC: Rigid die cast aluminum frame and handle side plate Sport type: Fishing

dfd: precision dual force drag system precision click drag adjustment for more precise drag settings multi-disc, carbonite and felt drag washers for dfd quick-set anti-reverse roller bearing plus ratchet system dual anti-reverse systems for maximum security for sizes 55 to 93 Sport type: Fishing

4BB + 1RB stainless steel bearing system on spinning models 5.3:1 gear ratios with over 40" of line pickup Precision machine cut brass pinion gear Sport type: fishing

6061-T6 Machined aluminum frame with forged side plates Helical cut gears for increased torque, smoothness and improved gear meshing Makaria reels all feature two-speed gearing Systems Cold forged, type-ii anodized, Machined aluminum spool

MACHINE RIGID CONSTRUCTION – Features 6061-T6 machined aluminum frame, side-plate and spool for maximum durability and strength CORROSION-RESISTANT COATING – Features Okuma’s CRC: Corrosion-resistant coating process which penetrates and bonds to the metal, which helps significantly toward long term protection. DIAL IT IN WITH TWO 2-SPEED GEARING - Okuma's 2-speed technology incorporates two sets of stainless steel main and pinion gears, allowing anglers the option of a high-speed gear ratio or a powerful low-speed gear ratio for maximum power and torque DUAL FORCE DRAG SYSTEM - Designed to provide a smooth and powerful drag, the drag mounts on the right side of the spool and uses a Pull B…

Open spool bearings with TSI-301 oil. Increases freespool 2-1/2 times. All non-spool bearings feature full grease pack for maximum longevity. SE reels will feature a yellowfin tuna etched into the side plate. Frames have been machined out for increased clearance between spool and cross bars. MK-8/10/15 will feature MK-20 size handle knobs.

Lightweight & rigid C-40X rotor & TCA construction Flite Drive system increases gear stability and smoothness Multi-disk Carbonite drag washers with Hydro Block gasket A7075 spool shaft and key drag washers for reduced weight Reversible screw in Carbon fiber handle design