Reels

3 Stainless steel ball bearings + 1 roller bearing
Carbon Matrix drag system
6 pin centrifugal brake
Synchronized level wind system
Compact bent handle and star

Standard Weight: 12.2 oz (365 g)
Gear ratio: 5.3
Maximum line rewind: 25.6 inches (65 cm)
Ball Bearing: 2/1
Line Capacity: 255 m (approx. 4.5 / 200 m (approx. 6 / 160 m) (approx. 7.5 no). Bakelite 2-point centrifugal brakes. T-type knob + counter balance handle. Equipped with HPCR bearings on spool shaft. mechanical brake standard equipment. line alarm

Weight: 14.1 oz (410 g)
Gear ratio: 5.3:1 Maximum line retrieve: 25.6 inches (65 cm)
Maximum Drag Force: 5 Kg
Line Capacity: 0.01 inch (0.35 mm) / Approx. 0.1 inch (4.5 cm): 92.8 ft (250 m)
Line Capacity/0.405mm/6:200m.Ball/Roller Bearings:2/1.6-Point Centrifugal Brake.Carbon Matrix Drag.Power: EXH (Extra Heavy) Taper: Fast

3 stainless steel ball bearings
Carbon Matrix drag system
Instant anti-reverse
Aluminum spool
Dual cast controls

6 Rust resistant, shielded ball bearings
CNC machined cut forged aluminum alloy frame, spool, side plate and reel foot
Two-speed gear ratio. multi and one way clutch anti-reverse mechanism
Dual drag system. loud line out alarm. level drag
Rigid stainless steel drive gear and pinion gear

CONSTRUCTION: Well suited for cranking, small swimbaits, pitching and flipping The innovative spool is constructed from a lighter alloy that is still very strong The reduced weight of the spool allows more line capacity for its size yet free spools with a delicate balance Extended UVA Handle is easy to grab and applies more torque per crank 100mm Baitcast handle for comfort G1 Duraluminium Spool for longer casts The 10+1 ball bearings are encased in a solid Aluminum Frame and Aluminum Side Plate making for an extremely smooth reel with tight tolerances TECHNOLOGY: To prevent dirt and water intrusion, a Magsealed Ball Bearing is utilized at the most vulnerable spot on the crank Ultimate Tournament …

DEPENDABILITY AND STRENGTH: The PENN Wrath II reel sports a lightweight yet corrosion-resistant graphite body, plus a machined anodized aluminum spool with Line Capacity Rings. Built for ultimate durability.
GEAR RATIO OF 6.2:1: Recovers at the rate of 35" | 89cm with every turn of the crank.
2+1 STAINLESS STEEL BEARING SYSTEM: The Wrath II includes two shielded stainless steel ball bearings plus 1 instant anti-reverse bearing to provide smooth and predictable operation when the going gets tough.
FELT FRONT DRAG DRAG SYSTEM: Favored for extremely rapid start-ups with a max drag of 12lb | 5.4kg.
LINE CAPACITY: The PENN Wrath II Spinning Reel fits Mono Capacity yd/lb: 200/8 165/10 120/12. …

ROD CONSTRUCTION: Solid Toray blank Evolve carbon divide reel seat White soft touch finish Rod Length: 28” Rod Power: Medium Light Rod Length: 30” Rod Power: Ultra Light REEL TECHNOLOGY: 5 BB with instant anti-reverse Defrost reel lubricant Aluminum spool with fat bail design Reel type: Spinning

The 13 Fishing® Wicked Long Stem Ice Fishing Combo is newly designed, yet keeps its simplicity to deliver results. All day comfort is at the forefront with EVA foam handles for comfort, while a high performance 30-ton graphite blank allows you to feel even the lightest of bites. The reliable reel on the Wicked Long Stem Ice Combo will stay smooth even in the coldest weather. FEATURES: High density Japanese EVA foam and an ergonomic Evolve reel seat High performance 30 ton solid Toray graphite Dependable stainless steel 5BB system with instant anti-reverse

CONSTRUCTION: Solid Toray carbon blank material Evolve performance guides Evolve carbon divide seat

FEATURES: Solid toray graphite blank Lightweight evolve electric blue guides Hidden evolve reel seat

This unique and extraordinary reel was designed by Okuma’s urban design team named Wave Off. Wave Off was created in 2017, its mission is to ”Defy the Boundary Where Tide Meets Street,” which brings together the worlds of fishing and urban culture. Graffiti inspired the reel’s trademarked Paint Off™ paint that will wear away over time, highlighting an unexpected element of surprise to showcase the reel’s underlying colors. The intent is for anglers to get out, use the reel, and let the Paint Off™ paint wear away naturally. Underneath the carbon gray exterior lies a vibrant and iridescent undercoating waiting to be exposed. The contrast is a testament to the passion and life bustling beneath a seem…

By increasing the arbor to a larger diameter and making the spool narrower—all the while decreasing its total weight and parts—Lamson took the steadfast and stylish Guru to another level with the Guru S-Series. An enhanced spool machining technique—focusing material only where it’s needed—makes this version significantly lighter and higher performing than its predecessor. Lamson opened the porting to reduce weight and improve line drying, and even introduced a curved cross-section for structural stability. This reel continues to set the standard for enlightened excellence as a rugged, fully USA-machined, and ultra-reliable reel at a great price.

CONSTRUCTION: Heavy Duty design features a full cage Can be used for both saltwater and Spey fishing Rugged, fully USA-machined, and ultra-reliable reel Updated spool geometry for enhanced retrieve rates Porting further reduces weight and improves line drying Integrated counterbalance A curved cross-section provides structural stability Guru S Spools also fit Guru S HD Reels Model: GURU3

Remix S is the ultimate hybrid. Machined from bar-stock aluminum, the case delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish. The spool (compatible with Liquid S), is pressure-cast with pocket spar design and increased strength-to-weight ratio. Remix S improves on the legacy of the first-generation Remix with larger diameters, larger arbors, greater strength, and a larger, easy to grip drag knob. Remix S brings an unmatched level of quality in its class. DESIGN & TECHNOLOGY: Format: Large Arbor Materials: Machined 6061 Aluminum Case, Pressure Cast Aluminum Spool Finish: Type II Anodize Case, Polyurethane Spool Drag: Sealed Conical Drag Weight: 0.8 lbs …

Liquid S has larger diameters, larger arbors and increased strength-to-weight ratios that come from the unique pocket spar frame and spool design. The arbor shape has been redesigned for cleaner spooling, and the drag knob is now larger, and if we can say it, “gripier”. Liquid S carries the Liquid name to a higher level. DESIGN & TECHNOLOGY: Format: Large Arbor Materials: Pressure Cast Aluminum Frame and Spool Finish: Polyurethane Case and Spool Drag: Sealed Conical Drag Weight: 0.8 lbs Dimensions: 6 × 6 × 4 in

CONSTRUCTION & TECHNOLOGY: Pressure-cast aluminum frame and spool Polyurethane case and spool finish Features a nylon carrying case to protect gear Includes one Liquid reel and two spare spools

CONSTRUCTION: Hybrid reel between the free-form structures of a cast spool and the mechanical integrity of a CNC-machined case, Remix is the ultimate hybrid Machined in Idaho from bar-stock aluminum, the case delivers maximum structural rigidity and durability all wrapped in a harder, brighter finish The spool is pressure cast with radiused compound curves, near zero radius inside corners and a precise fit and finish U-shape arbor and narrow format to aid in line control

For that featherweight feel and heavyweight performance, we depend on the Litespeed F Reel. The open look allows for quick line drying and minimal weight, while the meticulous machining creates strong load paths. With Lamson's classic, time-tested—over 25 years—conical drag system, this reel delivers unrivaled durability and smooth power, while the indexing click drag knob gives precise adjustments.

For that featherweight feel and heavyweight performance, we depend on the Litespeed F Reel. The open look allows for quick line drying and minimal weight, while the meticulous machining creates strong load paths. With Lamson's classic, time-tested—over 25 years—conical drag system, this reel delivers unrivaled durability and smooth power, while the indexing click drag knob gives precise adjustments.

CONSTRUCTION: Pressure-cast aluminum frame and spool Polyurethane case and spool finish Full-radius compound curves Near zero-radius inside corners CNC-machined in the US

CONSTRUCTION: Pressure-cast aluminum frame and spool Polyurethane case and spool finish Full-radius compound curves Near zero-radius inside corners CNC-machined in the US