Drills & Screwdrivers

Permite cortar una pieza de trabajo sin astillas por ambos lados

Parallel Edge Guide Guide Stop & Rods Offset Base for Guide Rail Table Widener, Small Bore, Template Guide Base Sys-3 Stystainer

Used with the COntruo and Adapter Plate

Stylish Design Can be used all year round Can be used everyday Can be used both indoor and outdoor

From Festool Easy to use Good product

Compressed air and extraction in one hose Rotation compensation for effortless work Compressed air and extraction Technical features: length 5.00 m. discharge resistance (DIN IEC 312)

FESTOOL 576865 Cordless Drill CXS 12 2.5-Set

Blade GB 10"-SSU 200 Model Number: 769066

For all applications and most 18-volt devices – with a focus on power and endurance (not compatible with the sanders ETSC 125, RTSC 400, DTSC 400 and the dust extractor CTC SYS) An ideal addition to the Festool Basic cordless tools or as additional battery packs for the workshop or job site

When building cabinets two of the most used tools are our drill and impact driver. These tools advance our efficiencies and improve the quality of our products. At Festool we have paired these tools for that specific purpose. Build out your workstations in the shop or on the jobsite to promote continuous improvement within your operation. Robust: Long lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service Maximum power: Thanks to the extremely powerful, brushless, and therefore long lasting, latest generation EC-TEC motor with three speed levels, and T mode specifically for self tapping screws Kickback free hammer mechanism drives the fastener …

This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensure maximum performance and endurance. Robust: Long lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service Maximum power: Thanks to the extremely powerful, brushless, and therefore long lasting, latest generation EC-TEC motor with three speed levels, and T mode specifically for self tapping screws Kickback free hammer mechanism drives the fastener rather than spinning the drill around the screw thus protecting your wrist Ergonomic: compact design …

This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensure maximum performance and endurance. Robust: Long lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service Maximum power: Thanks to the extremely powerful, brushless, and therefore long lasting, latest generation EC-TEC motor with three speed levels, and T mode specifically for self tapping screws Kickback free hammer mechanism drives the fastener rather than spinning the drill around the screw thus protecting your wrist Ergonomic: compact design …

An amazing duo! - the TPC 18 QUADRIVE Hammer Drill and the TID 18 Impact Driver together cover a wide range of applications with amazing power and performance. The perfect combination of the new generation brushless EC-TEC motor and the battery pack ensure maximum performance and endurance in all tasks. Robust: Long lasting quality components, fully covered thanks to the comprehensive support provided by Festool Service Maximum power: Thanks to the extremely powerful, brushless, and therefore long lasting, latest generation EC-TEC motor with three speed levels, and T mode specifically for self tapping screws Kickback free hammer mechanism drives the fastener rather than spinning the drill …

Switchover from screwdriving to drilling without changing the set torque Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric adapter and depth stop FastFix interface on the cordless drill for rapid change of attachments within seconds without the need for any tools Long-lasting, robust and powerful thanks to brushless, maintenance-free EC-TEC motor The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service Noticeably lighter at full power thanks to Li-HighPower battery pack with high-current-resistant battery cells Fully electronic torque setting and switch-off for precise screwdriving…

Super compact. Surprisingly powerful. Compact and light for tight spaces and everyday use. Equipped with an EC TEC motor, the CXS 12 packs a punch! Built to feel like an extension of your hand, with a balance of power and ergonomics. You’ll want to reach for it every time. A number of chuck attachments for nearly every application. Versatile and adaptable: With a library of attachment chuck options for nearly any application. All of the current 18 V attachments also fit perfectly on the CXS 12—with quick and easy changes with the CENTROTEC and FastFix interfaces. Superbly designed down to the finest detail. Fully loaded. Equipped with compact batteries compatible with all chargers in the 18-v…

Fits perfectly into Systainer³ models with lid compartments Drills and bits are securely held in modules that can be adjusted Drills made from high-alloyed ball bearing steel With center point and two cutters for drilling quick and clean holes 2 chamfers instead of pre-cutting edges for an extended life, even when cutting laminated chipboard

Switchover from screwdriving to drilling without changing the set torque Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric adapter and depth stop FastFix interface on the cordless drill for rapid change of attachments within seconds without the need for any tools Long-lasting, robust and powerful thanks to brushless, maintenance-free EC-TEC motor The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service Noticeably lighter at full power thanks to Li-HighPower battery pack with high-current-resistant battery cells Fully electronic torque setting and switch-off for precise screwdriving …

Switchover from screwdriving to drilling without changing the set torque Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric adapter and depth stop FastFix interface on the cordless drill for rapid change of attachments within seconds without the need for any tools Long-lasting, robust and powerful thanks to brushless, maintenance-free EC-TEC motor The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service Noticeably lighter at full power thanks to Li-HighPower battery pack with high-current-resistant battery cells Fully electronic torque setting and switch-off for precise screwdriving …

Super compact. Surprisingly powerful. The CXS/TXS 18 will impress you with its combination of a small, light design with full 18 V power. This compact drill-driver is ideal for everyday use as a practical, powerful companion for almost all applications. Available in C shape and T shape—whatever works for you. Multiple available attachments for every application. Adaptable drill and drive capability: The right attachment for your needs. All attachments of the current 18V drills from Festool fit perfectly—with quick and easy change through the CENTROTEC system and FastFix interface. Superbly designed and built. The CXS/TXS 18 is well equipped with a bit holder, LED light control, a belt clip…

The compact and handy design makes it easier to work even in confined areas Quick and tool-free conversion to drilling, screwing, angle drilling and angle screws thanks to FastFix interface Furniture, fittings and kitchen assembly Technical features: battery voltage 18.00 V. gears 2. idle speed 1/2. Gear 0 - 470/0 - 1600 min-¹. drilling diameter wood/steel 35.00/10 mm. torque adjustment 1./2. Gear 1.10 - 8.00/0.40 - 2.30 Nm. Max. Torque wood/steel 22.00/40.00 Nm. drill chuck span 1.00 - 10 mm. battery capacity 3.00 Ah. product weight 0.70 kg. drive type battery. standard 230 V. contents: 1 piece Box contents: Festool cordless drill TXS 18 C 3.0-Plus, 2 x battery pack BP 18 Li 3.0 C, quick c…

Super compact. Surprisingly powerful. The CXS/TXS 18 will impress you with its combination of a small, light design with full 18 V power. This compact drill-driver is ideal for everyday use as a practical, powerful companion for almost all applications. Available in C shape and T shape—whatever works for you. Multiple available attachments for every application. Adaptable drill and drive capability: The right attachment for your needs. All attachments of the current 18V drills from Festool fit perfectly—with quick and easy change through the CENTROTEC system and FastFix interface. Superbly designed and built. The CXS/TXS 18 is well equipped with a bit holder, LED light control, a belt clip…

Furniture assembly and kitchen fitting. Installation of fittings, rear walls, strips. Installation of doors and windows, and drilling and screwdriving in wood, metal and plastic. Fences, pergolas, carports, canopies. Production of wooden substructures Drive type Battery. Battery voltage 18 V. Gears 2. Idling speed, 1st gear/2nd gear 0 - 450/0 - 1500 min⁻¹. Drilling diameter, wood/steel 45/13 mm. Torque adjustment 1st/2nd gear 0.8 - 8/0.5 - 6 Nm. Max. torque, wood/steel 35/50 Nm. Chuck range 1.5 - 13 mm. Battery capacity 3,1/4,0 Ah. Weight with Li-Ion battery 1,5/1,7 kg In Systainer SYS3 M 187 Model number: 577051

High-speed and durable. The robust four-speed metal gearbox stands out in the QUADRIVE with its enormous power and high speeds. it can handle even the toughest tasks. The fully optimized gear change allows users to switch from any gear straight to any other in a fast and controlled manner. The latest generation of brushless EC-TEC motors enables rapid work progress and clean drilling results. Unrivalled range of applications. The large number of attachments, combined with perfectly matched accessories, make the TPC the most versatile hammer drill and it is unrivalled in its class. The smart FastFix interface allows the attachments to be changed quickly and without the need for any tools – fo…

Super compact. Surprisingly powerful. The CXS/TXS 18 will impress you with its combination of a small, light design with full 18 V power. This compact drill-driver is ideal for everyday use as a practical, powerful companion for almost all applications. Available in C shape and T shape—whatever works for you. Multiple available attachments for every application. Adaptable drill and drive capability: The right attachment for your needs. All attachments of the current 18V drills from Festool fit perfectly—with quick and easy change through the CENTROTEC system and FastFix interface. Superbly designed and built. The CXS/TXS 18 is well equipped with a bit holder, LED light control, a belt clip…