Drills & Screwdrivers

Drill / Driver is compatible with Powerworks 20V and XB (40V / 20V) batteries Power all your indoor and outdoor 40V and 20V products with the Power works xB Battery - the ultimate Battery solution

Battery: Built-in lithium ion battery 3.7 V, 850 mAh Screw tightening work range: Small screws M3 (when electric), small screws M6 (with hand tightening) Chuck: One-touch bit lock system (Dimensions to step are 0.35 inch (9 mm), 0.45 inch (11.5 mm), 0.5 inch (13 mm), Hex bits opposite sides: 0.25 inch (6.35 mm) Tightening torque: 1 Nm (when electric), 8.0 Nm (maximum endurance torque) Rotational speed: 230 rpm USB terminal: 1 terminal, Micro USB B type, DC5V Capacity (estimated and fully charged): Small screws, iron (no springs or washers) M3 x 5 mm approximately 620 pieces, M6 x 10 mm approximately 540 pieces Charging time: about 45 minutes (when using our EZ37C4 and EZ37C5), about 35 …

Genuine, OEM Replacement Part Replacement nose cone assy., part number N727299 Compatible with: BAT20-716, BAT20-716

Milwaukee Tool Case for M18 Fuel Drill and Impact kits 2997-22, 2999-22 White,Red CaseMilwaukee2997 0

Milwaukee Tool Case Only - Fit for 2597-22 - M12 12 Volt Tools Fits Hammer Drill 2404-20, Impact Driver 2453-20, Charger, Batteries, Manuals Heavy Duty Hard Plastic Tool Case Great for organizing and transporting your tools May also fit other Milwaukee 12V tools

Power Tools and Accessories Country of manufacture: China Manufacturer: Milwaukee Electrician's right angle drill for drilling between joist and studs, in tight corners or in close quarters Powerful 7 amp motor and 3 speed ranges Steel hardened shafts. designed for use with up to 2-9/16-inch selfeed bits Includes case, side handle, RAD assembly, 9/16-inch open wrench, 3/16-inch socket wrench, chuck remover bar Weighs 10.3 pounds. 5-year warranty

Designed for use with Impact Drivers Shock Zone Geometry designed to flex Compression forged tip Special heat treatment absorbs impacts Custom engineered steel

Power Tools Manufacturer: Milwaukee Made in: China

Milwaukee Safety Strap with Loop up to 50 lbs

The product is manufactured in China

Milwaukee M18FPT114-0C 18v Fuel 1 1/4" Threader Naked Senses binding, shuts off tool preventing kickback and injuries Support Arm Resists Threading Torque, Enables Threading without Pipe Stand Lightest cordless Threader with capacity up to 1 1/4 Grip Area eliminates Need to Contact Spinning Die Head Variable Speed

Battery Technology - Intelligence Innovative Electronic Clutch: Delivers up to 125 in/lbs of torque with 11 settings plus drill mode for complete control in fastening applications 0-1,500 rpm 3/8" Single Sleeve Ratcheting Chuck Built-in LEDs

Milwaukee 4-pole frameless motor: features a robust design combined with rare-earth magnets for longer life, best-in-class 500 in. lbs. of torque and 0-450/0-1,800 RPM Single sleeve ratcheting chuck: all-metal 1/2 in. chuck optimizes grip strength and reduces slippage Built-in LED light: illuminates surfaces for faster, more efficient work 525 in. lbs. of peak torque 0-450/0-1,800 RPM

4-Pole Frameless Motor: 500 in-lbs of torque and 0-400/0-1,800 RPM Redlink Intelligence - Overload Protection Defends Against Abusive Situations Redlithium Battery Pack 40 More Run-time, 20 More Speed, 20 More Torque Includes Hard Case and 1 Battery Operates Down to -18C (0 F). Fuel Gauge

POWERSTATE Brushless Motor: Provides constant power under heavy load to complete holes faster than corded drills. REDLITHIUM Battery Pack: Provides superior pack construction, more work per charge and more work over the life of the pack than competitive batteries. REDLINK PLUS Intelligence: Ensures optimal performance and overload protection to prevent damage to the tool or battery during heavy applications. All-Metal Keyed Chuck: For maximum durability and bit retention. Includes 2702-20 Tool Only - Batteries and Charger Not Included.

The product is easy to use The product is durable The product is manufactured in Taiwan 1/4-inch hex right-angle drill/driver attachment. accepts standard 1/4-inch hex shank bits For cordless 2.4- to 18-volt drills. up to 235-inch-pounds of torque. allows work in tight spots Durable all-metal housing and steel gears Only 2 inches wide for working in tight spots. 5-year warranty

Hex impact driver once again raises the bar for 12V performance with best in class driving speed, power, and size This product meets customer requirement Product is easy to use

It can drill holes through softwood, hardwood, and masonry with ease, requiring you only to flip the mode selector switch on top of the drill This product meets customer requirement Product is easy to use

Hex impact driver once again raises the bar for 12V performance with best in class driving speed, power, and size This product meets customer requirement Product is easy to use Included Components: Construction - Power Drills Corded Drills Power Drill Drivers

Electric Power Tool: Milwaukee M18 Fuel 21mm 6" random orbital sander provides efficient sanding power. Powder Coated Finish: Durable chrome plating and powder coated housing for long life. Compact Size: Compact 6" size allows for easy maneuverability in tight spaces. High Performance: 21mm sanding belt delivers fast, efficient sanding of wood and other materials. Reliable Brand: Milwaukee Electric Tool is a leading brand in power tools for professionals and homeowners alike.