Microphones

42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
20 banks of 12 compatible frequencies with automatic frequency scan that searches for available distortion free frequencies
True adaptive-diversity reception for high reception quality
Sound check mode allows you to check the audio and RF signal at any time during setup
Sturdy metal housing with illuminated graphic display

Sennheiser threepack-835s, professional stage vocal microphone.

The Sennheiser XSW-IEM-EK-BC is the Bodypack Belt Clip for the XSW-IEM-EK-A Receiver. Sennheiser XSW IEM Belt Clip For the XSW IEM EK Receiver.

The Sennheiser BA10 is a rechargeable battery pack for the Evolution Wireless D1SKM series wireless handheld transmitters.SpecificationsOutput Voltage: 3.6VCapacity: 2200mAh Sennheiser BA 10 Rechargeable Battery Pack for D1, AVX & SL Handheld Transmitter.

The Sennheiser Mobile Kit is a Manfrotto PIXI Tripod and Sennheiser Smartphone Clamp that allows you to create a mobile recording rig with your MKE200/400, XS-LAV, or XSW-D-LAV microphones. Sennheiser MOBILE-KIT Manfrotto PIXI Mini Tripod and Smartphone Clamp.

Connector: XLR-3 Connector
Jack Plug: 6.3mm (0.25")
Phantam power: 48V

Suitable for Speech, Vocals & Lectures
FEATURES AN ON/OFF SWITCH : A silent on/off switch is provided for convenient muting of the mic between speeches or performances.
EXCELLENT FEEDBACK REJECTION: The Sennheiser e835S is a handheld cardioid dynamic microphone offering a frequency response tailored for clear reproduction of vocals and speech in concert venues, lectures, houses of worship, and presentations.
COMPATIBILITY: The XLR 3-pin output ensures compatibility with most microphone preamps and mixer inputs.
OUR KIT INCLUDES: Conveniently added are 3 XLR microphone cables for your use along with 3 XLR mic cables. Pop the microphones into the cables and let your music flow.…

All-metal housing and premium finish provides efficient rejection of any electrical interference and noise
Integrated windscreen
Attenuation and Low Cut Switches: -20 dB pad switch and 100 Hz low-cut switch
Gold-plated XLR connector ensures loss-free, reliable signal connection
Bundle includes double layer nylon pop filter (6" Diameter, 14" Gooseneck)

Adorned with an all-black finish complimented with red & black internal windscreens, the V7-MC1/BLK from SE Electronics is a high-performance wireless version of their V7 supercardioid dynamic vocal mic, specially designed for your Shure® handheld transmitter. With the V7-MC1/BLK you'll produce massive sound & power, no cables required.The V7 MC1 series brings the powerful sound and performance of the V7 handheld wired dynamic microphone to your favorite Shure® wireless transmitter, so you can take your V7’s sound with you wherever you go. The DMC7 dynamic capsule in the V7 MC1 has been custom-developed for a crisp, open sound that perfectly captures your voice in the most natural …

The trusted sE Electronics V7 handheld dynamic mic sound with your Sennheiser wireless system is brought to you by the sE Electronics V7-MC2-BK capsule. The V7-MC2 is compatible with all Sennheiser handheld transmitters and comes in a sleek black supercardioid design. It is built with the same specialized aluminum voice coil you've come to love in the studio! With its rugged all-metal housing, internal shock mount, and windscreen, this capsule is ready for the rigors of the road!SE Electronics V7-MC2-BK Features:Compatible with all Sennheiser handheld transmittersSleek supercardioid capsule designInternal windscreenRugged all-metal housingSpecialized aluminum voice coilSE Electronics V7-MC2-BK …

Brings the powerful sound and performance of the V7 to Sennheiser wireless transmitters
Captures your voice in the most natural way you've ever heard on stage
All-metal beveled spring grille
Specialized supercardioid aluminum voice coil
Patented integrated shockmount
Switchable internal windscreen
Bundle includes 2 XLR cables and 5 Briskdrop velcro cable ties

Hand-crafted true condenser capsule individually tuned in our own factory
Classic vintage sound and all-metal housing
Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
Innovative close-miking shockmount
40 / 80 Hz bass-cut filters and -10 / -20 dB pads

Crafted with meticulous attention to detail, the sE4400 stands as a testament to quality, featuring a robust die-cast all-metal housing, metal switches, and a rugged spring steel wire mesh grille designed to handle all you throw at it. The elegant, timeless design is matched only by its sonic character and versatile personality. Equipped with a hand-crafted true condenser capsule, the sE4400 delivers a classic vintage sound, while its switchable pickup patterns - including cardioid, omnidirectional, figure-eight, and hypercardioid, give you the options you need. Enhanced with innovative close-miking shock mount technology, the 4400 also features 40/80 Hz bass-cut filters and -10/-20 dB pads …

Replacement black grille for any V7 dynamic, hard-wired or wireless
Efficiently reduces unwanted wind noise and plosive pops
Spring steel grille
Beveled edge around the grille prevents your mic from rolling when you put it down
Dent-proof and corrosion-free for perfect reliability

Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference. it must operate at a low power level (not in excess of 50 milliwatts). and it has no protection from interference received from any other device.

Transmission Technology: Utilizes the new 5.8GHz transmission technology to transfer high-quality audio
Portable Receiver RX: The Saramonic VmicLink5 RX is a camera-mountable integrated wireless receiver
Easy to Read LCD Display: It features an easy-to-read LCD display and DigRF synchronization between transmitter and receiver
Body-pack Transmitter TX: The VmicLink5 TX is a compact transmitter that employs a crystal-controlled PLL synthesizer. It is equipped with a muting function and lock-type Mic and Line input connectors
Useful and Flexible Tool: One receiver can work with up to three transmitters simultaneously, making it a useful and flexible tool for audio recording, DSLR video, field …

Bundle Item#1: Saramonic CaMixer Microphone Kit with Dual Stereo Condenser Mics, Digital Mixer & XLR/Mini-XLR Input with +48V Phantom Power Preamp - For DSLR Cameras and Camcorders
Bundle Item#2: Saramonic SM-LV600 Mini-XLR Omnidirectional Lavalier Microphone, Features Omnidirectional Polar Pattern, 20' (6m) Cable, Includes Aluminum Lapel Clip and Foam Windscreen
Designed for DSLR Cameras & Camcorders with a 3.5mm Mic Input

Lightweight and compact camera-mountable wireless microphone system with a durable, all-metal XLR plug-on transmitter that can supply phantom power and make any kind of microphone wireless
Attach a handheld mic to the plug-on transmitter for wireless interviews and presentations, attach a pro shotgun mic for wireless booming — the options are endless
Incredibly easy to use: Install AA batteries, turn power on, attach the microphone of your choice, switch the transmitter and receiver to the same channel (A, B, C, or D) — and that’s it
Built-in headphone jack on the receiver lets you always hear your sound, even when your camera doesn’t have a headphone output
Multi-channel capability for avoi…

UHF wireless handheld interview microphone with rich, broadcast-quality sound
Incredibly easy to use, UHF frequency spectrum helps you avoid interference
Easy-to-read backlit LCD display, 16 selectable channels for running multiple wireless systems
Wireless infrared synchronization makes it easy to sync channels with an RX15 portable receiver (sold separately)
Up to 330-ft (100m) operating distance, features mute and power-lock capabilities

Uhf 514~596mhz
96 selectable channels in 2 groups
Over 330-feet (100M) in Open areas or 200-feet (60M) with obstacles
Easy-to-read LCD displays
Provide +48V Phantom power

The Saramonic SR-WM4C is a compact and lightweight VHF wireless microphone system - the perfect audio solution for recording simply and easily, free from the limit of distance. The SR-WM4C is ideal for film making, conducting broadcast interviews and business presentations - or any other need that requires portability and great sound quality. The slim, low-profile clip-on omni-directional microphone transmits its signal via a bodypack transmitter to the receiving unit. Both the Saramonic receiver and transmitter are lightweight and easy to use - offering ultimate flexibility without sacrificing high-quality audio. This set includes the Saramonic SR-WM4C receiver, Saramonic SR-WM4C bodypack transmitter …

Designed for Saramonic UwMic9S Mini Wireless Receiver and SR-R1 Belt Pack Stereo Recorder
Works with SR-SM1 Shoe-Mount Adapter
Durable Metal Construction
Quick-Release Design

One stereo 1/8" (3.5 mm) mini-jack input to connect stereo mic.
Two Mono 1/8" (3.5 mm) mini-jack inputs to connect Mono mics.
One stereo 1/8" (3.5 mm) mini-jack outputs audio Signal from the
Dual trim audio control knobs