USA
Catalog   /   Computing   /   Components   /   Graphics Cards

Comparison MSI GTX 1060 Armor 6G OCV1 vs Palit GeForce GTX 1060 Dual

Add to comparison
MSI GTX 1060 Armor 6G OCV1
Palit GeForce GTX 1060 Dual
MSI GTX 1060 Armor 6G OCV1Palit GeForce GTX 1060 Dual
from $301.00 up to $347.44
Outdated Product
from $297.41 up to $338.28
Outdated Product
TOP sellers
Main
Very high performance for FullHD. Potential for 2K and 4K.
InterfacePCI-E v3.0PCI-E v3.0
GPU
GPU modelNVIDIA GeForce GTX 1060NVIDIA GeForce GTX 1060
Memory size6 GB6 GB
Memory typeGDDR5GDDR5
Memory bus192 bit192 bit
GPU clock speed
1544 MHz /1759 MHz GPU Boost/
1506 MHz /1708 MHz GPU Boost/
Memory clock8000 MHz8000 MHz
Lithography16 nm16 nm
Max. resolution7680x4320 px7680x4320 px
Passmark G3D Mark9080 score(s)9080 score(s)
Connections
DVI-D11
HDMI21
DisplayPort23
Software
DirectX1212
OpenGL4.54.5
VR
Stream processors12801280
Stream processor version55
Texture units8080
General
Monitors connection44
Coolingactive (fan)active (fan)
Fans22
Power consumption120 W120 W
Additional power8 pin6 pin
Number of slots22
Length275 mm252 mm
Added to E-Catalogaugust 2016july 2016

GPU clock speed

The frequency of the graphics processor of the graphics card. As a general rule, the higher the frequency of the GPU, the higher the performance of the graphics card, but this parameter is not the only one — a lot also depends on the design features of the graphics card, in particular, the type and amount of video memory (see the relevant glossary items). As a result, it is not unusual for a model with a lower processor frequency to be more performant of two video cards. In addition, it should be noted that high-frequency processors also have high heat dissipation, which requires the use of powerful cooling systems.

HDMI

The number of HDMI outputs provided by the graphics card.

HDMI is by far the most popular interface for high-definition video and multi-channel audio (it can be used for video and audio at the same time). This connector is almost standard for modern monitors, in addition, it is widely used in other types of screens — TVs, plasma panels, projectors, etc.

The presence of several outputs allows you to connect several screens to the graphics card at the same time — for example, a pair of monitors for organizing an extended workspace. However, there are never more than 2 HDMI ports in video cards — for a number of reasons, for several screens at once, in this case it is easier to use other connectors, primarily DisplayPort.

DisplayPort

The number of DisplayPort outputs provided by the graphics card.

DisplayPort is a digital media interface similar in many ways to HDMI, but primarily used in computers. The specific capabilities of this interface depend on the version (see below), but even in the most modest modern version of DisplayPort, it allows at least 4K at 60 frames per second and 5K at 30 fps. Another interesting feature of this standard is the ability to daisy-chain multiple screens to one port (“daisy chain” format).

In light of the latter, we can say that the number of DisplayPort outputs corresponds to the number of screens that can be connected directly to the graphics card, without using a daisy chain. Such a connection may be required, in particular, for monitors that do not support daisy chaining. If such a mode is supported, the maximum number of screens will be at least twice as high as the number of connectors. However, it is worth considering that the resolutions supported by the video adapter itself may not reach the maximum capabilities of the DisplayPort version used.

Additional power

Format of additional power required for the operation of the graphics card.

By itself, the PCI-E connector, which is standardly used to connect video cards, provides 75 watts of power. For many models, even quite performant ones, this is quite enough, and many modern video adapters do without additional power. However, models with additional power have become more widespread, especially among high-end solutions.

The simplest version of such a power supply is one 6-pin or 8-pin connector. A 6-pin connector can additionally provide up to 75 watts, an 8-pin connector can provide up to 150 watts. However, for high-end solutions, one connector is not enough, so there are models with 6 + 8 pin, 8 + 8 pin, and even 8 + 8 + 6 pin or 8 + 8 + 8 pin formats.And the new cards are completely 16-pin. Such power connectors have a total of 16 lines: 12 for current supply and 4 signal. The effective power threshold of the 16 pin connector is up to 600 watts. Connection to it can be done through a 3×8 pin adapter.

Note that it is theoretically possible to connect a 6-pin power supply to an 8-pin connector and vice versa, even corresponding adapters are availa...ble for this. However, in fact, the possibility of such a connection should be clarified separately, and such tricks should be used only in extreme cases, when other options are not available.

Length

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.
MSI GTX 1060 Armor 6G OCV1 often compared
Palit GeForce GTX 1060 Dual often compared