USA
Catalog   /   Computing   /   Input Devices   /   Mice

Comparison Razer Viper 8KHz vs Razer Viper Ultimate

Add to comparison
Razer Viper 8KHz
Razer Viper Ultimate
Razer Viper 8KHzRazer Viper Ultimate
Compare prices 9Compare prices 28
TOP sellers
Main
Polling rate — 8000 Hz
Product typemousemouse
Connectionwiredradio
InterfaceUSB A
Cable length2.1 m
Range10 m
Sensoropticaloptical
Typefor gamefor game
Sensor and control
SensorRazer Focus+Razer Focus+
Sensor resolution20000 DPI400 – 20000 DPI
Max. acceleration50 G50 G
Max. speed450 ips650 ips
Polling rate1000 Hz (1 ms)
Number of buttons66
Side buttons
 /on both sides/
 /on both sides/
DPI-button
 /at the bottom of the mouse/
 /at the bottom of the mouse/
SwitchesRazer, opto-mechanicalRazer, opto-mechanical
Scroll wheels11
Features
DPI level indicator
 /at the bottom of the mouse/
 /at the bottom of the mouse/
Leg materialteflon (PTFE)teflon (PTFE)
Optimal grippalmar, fingerpalmar, finger
Programmable buttons
Built-in memory
LightingRGBRGB
Lighting effectsRazer ChromaRazer Chroma
Cable
braided
 
General
Power sourcebattery
In box
 
 
USB receiver
charging dock
Size (LxWxH)127x66x38 mm127x66x38 mm
Weight69 g74 g
Color
Added to E-Catalogmarch 2021january 2020

Connection

The type of connection used by the mouse.

All types of mouse connection can be divided into wired and wireless. There are also combined models that allow both methods; however, for a number of reasons, they have not received much distribution.

Wired mice can vary in connector type; however, the universal standard nowadays is USB, other options are much less common (see "Cable" for them). Anyway, such mice are much cheaper than wireless counterparts, moreover, they do not require batteries / accumulators and have an almost unlimited lifespan. On the other hand, the wire restricts mobility and can be inconvenient when connecting, especially if the computer is located far away or in a hard-to-reach place.

Wireless devices, in turn, can connect via radio, Bluetooth, or Wi-Fi ; in some models, two options are combined — at the user's choice, (usually radio and Bluetooth). Regardless of the interface used, all such models are more convenient than wired ones due, in fact, to the absence of a cable; and their range is at least a few metres, so a wireless mouse can also work as a kind of remote control. At the same time, a wireless connection is more expensive than a wired connection, and besides, it requires autonomous power supply — as a result, the per...iod of continuous operation of the mouse is limited.

As for the different types of wireless connection, here are their features:

— Radio. To connect over the air, usually, a wireless adapter is used, which is connected to the USB port of the computer. This method is convenient in that it can be used with any computer, including systems that do not have built-in Bluetooth or Wi-Fi modules. The disadvantages of this option include the fact that the adapter requires a free connector; as a result, with a small number of USB ports, difficulties can arise. However, this moment, if necessary, can be easily corrected by connecting a USB hub; so it is this connection method that is most popular among modern wireless mice.

— Bluetooth. The main advantage of this connection method is that many modern devices — laptops, most monoblock computers, smart TVs, etc. — have built-in Bluetooth modules. Thus, you can connect the mouse to such equipment directly, without occupying hardware connectors. And for PCs not equipped with internal Bluetooth modules, appropriate adapters are available (which may even be included with the mouse). In addition, some advanced models with such a connection are able to remember several Bluetooth devices at the same time and switch between them literally “with the touch of a button”. The Bluetooth communication range is at least 10 m with line of sight.

— Wi-Fi. A rather specific option, which is extremely rare — in certain models of laptop mice (see "In the direction"). In many respects it is similar to Bluetooth — in particular, it is designed mainly to work with built-in modules and allows you to use a mouse without occupying hardware connectors. At the same time, the range of communication via Wi-Fi is much greater. On the other hand, this advantage is not of fundamental importance, and on the technical side, the creation of Wi-Fi mice is associated with certain difficulties. That is why this type of connection has not received distribution.

Interface

Interface used for wired connection in mice that have this capability (see "Connection type").

The most popular nowadays is the connection through the classic USB port. Mice for the newer USB-C connector, for a number of reasons, are produced quite a bit, despite the advanced capabilities of this interface. And PS/2, on the contrary, is gradually giving way to newer and more advanced standards. Here is a more detailed description of each of these options:

— USB. Connect to a traditional, full-size USB port (called USB A). Such connectors are extremely widespread: they are practically mandatory for modern PCs and laptops, and are also used as standard for working with peripherals in smart TVs, media centers and other types of electronics. That is why the vast majority of wired mice use this connector.

— USB-C. The newest (for 2020) type of USB connector; is significantly smaller than the USB A described above, as well as a convenient double-sided design. Such connectors are increasingly used in modern PCs and laptops, but very few mice are made for them; this is due to several reasons. Firstly, advanced versions of USB are often implemented through the USB-C connector, with high speed and high power supply; for mice, these characteristics are not needed, but they can be useful for more demanding devices. Secondly, the USB-C hardware socket can b...e used for interfaces other than USB (primarily Thunderbolt v3 and v4). Thirdly, it is simply easier to get into the full-size USB A connector with a plug — especially when trying to blindly find the connector on the back of the system unit. In light of all this, only a few laptop mice are produced under USB-C (see "In the direction").

— PS/2. A specialized connector with a characteristic round shape, used exclusively for keyboards and mice; colloquially known as "pee in half". PS/2 inputs are found exclusively in desktop PCs — they are too bulky for laptops. In general, this interface is considered obsolete and less used, but it can still be found in modern computers. At the same time, PS/2 has a very practical advantage: connecting a mouse to such a socket allows you to leave an additional USB connector free, which, in turn, can be useful for other peripherals. However, mice with only such a plug nowadays are almost never found — devices that can also connect to USB have become more common (see below).

— USB or PS/2. This option most often means that the mouse itself is equipped with a USB plug, and an adapter for PS/2 is supplied with it. Thus, the device turns out to be as versatile as possible in connection; at the same time, adapters are very inexpensive, their price is almost invisible compared to the cost of the mice themselves (even inexpensive ones). Therefore, most modern manipulators with the ability to work through PS/2 belong to this category.

Cable length

The length of the cable that is equipped with a mouse with the possibility of a wired connection (see "Type of connection").

When choosing this parameter, you should first of all take into account the distance from the manipulator to the connection port: a cable that is too short may simply not reach the connector, and a cable that is too long may get tangled at hand and create inconvenience. As for specific values, the most modest wire length in modern mice is 1 m or less ; such devices are intended mainly for laptops. Most desktop manipulators come with cables that are 1.1-1.5m or 1.6-2m long, with some models running longer than 2m.

Range

The range of the wireless connection provided in the mouse (see "Connection Type").

Almost all modern wireless models work confidently at a distance of at least 2 – 3 metres. So you need to pay attention to this parameter mainly when you plan to use the mouse at a greater distance from the computer — for example, when working with a projector at a presentation. At the same time, when evaluating the range, note that it is indicated for perfect conditions: the absence of interference and obstacles in the signal path, the full charge of the battery in the mouse, etc. In fact, the communication range may be somewhat less, so when choosing, it is worth taking a certain stock. Nevertheless, according to the claimed range, it is quite possible to evaluate the practical capabilities of different models and compare them with each other.

Sensor resolution

Resolution of the sensor responsible for tracking mouse movements on the work surface. Specified in DPI — dots per inch.

The physical meaning of DPI as a whole is as follows. The sensor of a modern mouse works on the same principle as the camera matrix, and consists of pixels. And DPI is the number of pixels that fall on 1 inch of the underlying surface (length or width), "visible" by the sensor.

It is believed that more DPI means a more advanced sensor and mouse in general; nowadays, models for 3500 – 5000 DPI, 12000 DPI, 16000 DPI even more are not uncommon. In a way, it is — high resolution contributes to accuracy. However, the only thing that is directly determined by this indicator is the speed at which the cursor moves across the screen: the higher the resolution of the sensor, the greater the number of pixels that the cursor will move when the mouse itself moves a certain distance. At the same time, it is worth recalling that too high a speed is even more undesirable than too low. So the real need for high DPI ( 1000 and above) arises mainly when working on large screens (4K resolution and more); for more modest displays (HD and Full HD), smaller values are often enough.

Max. speed

The ips (inches per second) parameter is the linear speed of mouse movement, expressed in inches per second, at which the manipulator's sensor is able to read the surface. In top models, the maximum mouse movement speed often reaches 400-600 ips, but devices with ips in the region of 200 are more common.

Polling rate

The polling rate shows how often the mouse sensor communicates with the computer about cursor movement. The parameter is measured in hertz (Hz), and one second is taken as a unit of time when evaluating it. The smoothness and speed of cursor movement directly depends on the sensor polling frequency. Directly related to this is the mouse response time - this is the time period during which the signal about the movement of the manipulator will reach the display of a change in the cursor position on the screen. Response time is measured in milliseconds (ms). The more hertz the mouse has, the shorter the response time it demonstrates.

Cable

Additional features of the cable that the mouse is equipped with.

These features may include a winding system, a detachable wire, and a braided wire(however, most modern mice still have a cable without a braid). Here is a more detailed description of all these features.

— Retractable. Wire equipped with a special coil for winding. This feature greatly simplifies transportation: during off-hours, the wire is as compact as possible and does not get tangled, and when used, it can be unwound to the desired length (usually the coil allows this possibility). All this is especially important for laptop mice (see "In direction") — in fact, most models with a wire reel fall into this category.

— Removable. Wire that can be detached from the mouse. Almost all mice with two connection options have this feature — wired and wireless: when working in a wireless format, the cable can be removed so that it does not interfere. However, there are also purely wired devices with such a cable — mostly laptop devices, where the wire is removed for ease of transportation. Also note that most often a universal connector like microUSB is used to connect the cable, so if necessary, the wire can be replaced with another one — for example, a longer one.

— In a braid. The presence of an additional braid on the mouse cable. This feature makes the wire more d...urable, reliable and resistant to bending. On the other hand, braid tends to accumulate dirt and fray when worn; because of this, the wire sheath loses its presentation faster than in mice without a braid. Yes, and such a wire is more expensive than a regular smooth one.

Power source

The type of power used by the wireless mouse (see "Connection Type").

Modern mice can be powered by replaceable cells, by a built-in battery, or by a mousepad. The first option is good because dead batteries can be replaced with fresh ones in a matter of seconds, no need to waste time charging. At the same time, replaceable cells are sold both in the form of disposable batteries and in the form of rechargeable batteries, which gives the user a choice: to buy inexpensive batteries regularly or to spend money on a battery (s) with a charger once. Here are the main sizes of such elements found in modern mice:

— AA. Widely known "finger" batteries. A fairly common option, although less popular than the smaller AAA — in fact, because of the larger size, poorly suited for compact mice. On the other hand, AA cells have higher capacitance. The number of such batteries can be different, most often there are models for 1xAA or 2xAA.

— AAA. "Mini finger" or "little finger" batteries. More compact than AA, due to which they are widely used in modern mice. The capacity of such elements, however, is lower, however, mice do not consume so much energy, and even with 1xAAA power supply, battery life can be calculated not only for months, but for years. Also, there are often models on ...="/list/267/pr-15332/">2xAAA, and extremely rarely on 3xAAA.

As for other ways of eating, their features are as follows:

— Accumulator. Own built-in battery is convenient primarily because it is initially included in the package, you do not need to buy it separately. And the further operation of such a mouse does not require additional expenses — it is enough to charge it from time to time. In addition, batteries can be made more compact than replacement cells. There are two main disadvantages of such a power supply, compared with the same batteries. Firstly, this is less battery life — in the most "long-playing" rechargeable mice, the battery life does not exceed 120 days (for batteries, this is a very limited indicator). The second point is the inability to quickly remove and replace the battery. This means that with a dead battery, there is only one option — charging, and it takes time; however, many mice allow use directly in the process of charging. But if the battery fails, at best, the device will have to be carried to the service, at worst, it will be changed entirely.

— From the rug. Quite a specific option: powered by a special pad that transmits energy to the mouse wirelessly. The pad needs to be connected to a computer port (usually USB), so such mice are very conditionally wireless. One of the advantages of such models is that they do not need to monitor the battery status. On the other hand, you can use the mouse only with the supplied mouse pad; if it is missing, the device becomes useless; and freedom of movement is limited by the length of the wire. Thus, mice with such a power supply do not actually have key advantages over wired models, and they are much more expensive. So nowadays, food from the rug is extremely rare.
Razer Viper 8KHz often compared
Razer Viper Ultimate often compared