Comparison Gigabyte GeForce RTX 3060 VISION OC LHR 12G vs MSI GeForce RTX 3060 GAMING X 12G

Video cards, hardware-protected from mining. The term Low Hash Rate was coined by NVIDIA to discourage cryptocurrency miners from video cards and return the favor of the computer gamer audience. There are LHR versions of video cards only among the generation of NVIDIA GeForce RTX 3000 series. Early GeForce graphics accelerators have no factory mining restrictions, as well as all old and new AMD Radeon graphics cards. However, among the GeForce RTX 3000 series there are video cards without LHR.

The number of HDMI outputs provided by the graphics card.

HDMI is by far the most popular interface for high-definition video and multi-channel audio (it can be used for video and audio at the same time). This connector is almost standard for modern monitors, in addition, it is widely used in other types of screens — TVs, plasma panels, projectors, etc.

The presence of several outputs allows you to connect several screens to the graphics card at the same time — for example, a pair of monitors for organizing an extended workspace. However, there are never more than 2 HDMI ports in video cards — for a number of reasons, for several screens at once, in this case it is easier to use other connectors, primarily DisplayPort.

The number of DisplayPort outputs provided by the graphics card.

DisplayPort is a digital media interface similar in many ways to HDMI, but primarily used in computers. The specific capabilities of this interface depend on the version (see below), but even in the most modest modern version of DisplayPort, it allows at least 4K at 60 frames per second and 5K at 30 fps. Another interesting feature of this standard is the ability to daisy-chain multiple screens to one port (“daisy chain” format).

In light of the latter, we can say that the number of DisplayPort outputs corresponds to the number of screens that can be connected directly to the graphics card, without using a daisy chain. Such a connection may be required, in particular, for monitors that do not support daisy chaining. If such a mode is supported, the maximum number of screens will be at least twice as high as the number of connectors. However, it is worth considering that the resolutions supported by the video adapter itself may not reach the maximum capabilities of the DisplayPort version used.

The number of individual fans provided in the graphics card cooling system (if any, see "Cooling").

In general, the more powerful the video adapter, the more efficient cooling it needs. So one fan is typical mainly for devices of the initial and inexpensive middle class, two — from medium to advanced, and three or more are almost an unambiguous sign of a premium-level solution. At the same time, there is no strict dependence here, and models with similar characteristics may have a different number of fans (especially since the cooling efficiency is determined not only by the number of fans, but also by their diameter). But what this parameter unambiguously affects is the length of the graphics card and, accordingly, the amount of space required to install it.

Backlight synchronization technology provided in a graphics card with an associated design.

By itself, synchronization allows you to "match" the backlight of the graphics card with the backlight of other system components — the motherboard, case, keyboard, mouse, etc. Thanks to this matching, all components can change colour synchronously, turn on / off at the same time, etc. Specific features the operation of such backlighting depends on the synchronization technology used, and, usually, each manufacturer has its own (Mystic Light Sync for MSI, RGB Fusion for Gigabyte, etc.). The compatibility of the components also depends on this: they must all support the same technology. So the easiest way to achieve backlight compatibility is to collect components from the same manufacturer.

Format of additional power required for the operation of the graphics card.

By itself, the PCI-E connector, which is standardly used to connect video cards, provides 75 watts of power. For many models, even quite performant ones, this is quite enough, and many modern video adapters do without additional power. However, models with additional power have become more widespread, especially among high-end solutions.

The simplest version of such a power supply is one 6-pin or 8-pin connector. A 6-pin connector can additionally provide up to 75 watts, an 8-pin connector can provide up to 150 watts. However, for high-end solutions, one connector is not enough, so there are models with 6 + 8 pin, 8 + 8 pin, and even 8 + 8 + 6 pin or 8 + 8 + 8 pin formats.And the new cards are completely 16-pin. Such power connectors have a total of 16 lines: 12 for current supply and 4 signal. The effective power threshold of the 16 pin connector is up to 600 watts. Connection to it can be done through a 3×8 pin adapter.

Note that it is theoretically possible to connect a 6-pin power supply to an 8-pin connector and vice versa, even corresponding adapters are availa...ble for this. However, in fact, the possibility of such a connection should be clarified separately, and such tricks should be used only in extreme cases, when other options are not available.

The number of slots occupied by the graphics card on the back of the system unit.

This indicator allows you to estimate the amount of space required to install a video adapter. It is relevant in the light of the fact that modern video cards can have a fairly extensive set of connectors, and for this set there has long been little standard lanyard for 1 slot. This is especially true for powerful performant models. Thus, many solutions, especially mid-range and top-end ones, occupy two or even three slots at once.

Separately, it is worth touching on models for which the characteristics indicate a fractional number of slots — usually 2.5 or 2.7. This detail is provided by the manufacturer for promotional purposes — as confirmation that the graphics card is smaller than a full-fledged 3-slot solution. However, in fact there is no difference between these options: adapters for 2.5 or 2.7 slots still block the third slot (albeit partially), making it unusable.

The total length of the graphics card.

In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.

Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of 150 – 200 mm or less ; an indicator of 200 – 250 mm can still be considered relatively small, 250 – 290 mm — medium, and many models (mostly advanced) have a length of more than 290 mm.