Drones BetaFPV

【TXCO Oscillator】SuperD ELRS 915MHz Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long-range flight. 【ELRS 915M】The first true diversity receiver for the 915MHz frequency bands, with two separate receiving modules working together to improve signal reception quality and overall reliability. The 900MHz radio system exhibits greater diffraction ability due to its lower frequency 【Receivers&Antennas】BETAFPV SuperD 915MHz diversity

【Designed for HD VTX】F4 2-3S 20A AIO V1 Brushless Flight Controller is designed for HD VTX, which features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to prevent screen blackout on the DJI O3 due to low voltage during throttle increase. 【DJI O3 6-pin PMU】It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. And redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning. Newbie friendly. 【20A ESC】The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single

Pavo Pico ultra-light brushless whoop drone with the smallest wheelbase supports DJI O3 Air Unit. Explore more possibilities while ensuring HD image quality Due to Its split design HD VTX mounting bracket, Pavo Pico supports quick installation of DJI O3 HD digital VTX modules and a rubber damper vibration-damping design with GyroFlow stabilization software ensures the output of high-definition videos and smooth HD images The battery slot and HD VTX mounting bracket duct height have been reduced to enhance the overall flying experience. DIY battery fixing methods are also supported, making them compatible with batteries of varying sizes and capacities The new F4 2S 20A AIO FC V1 upgrades

2S 4K Pocket Drone: BETAFPV Pavo Femto is a 2S high-definition brushless drone tailored for the DJI O4 Air Unit, delivering exceptional 4K/60fps video recording and unparalleled 2S 4K flight performance in a compact design. With customizable settings and robust components, the Pavo Femto excels in both freestyle flying and aerial videography (Comes without DJI O4 Air Unit by default) High-Performance Propulsion System: Equipped with the new LAVA 1102|14000KV motors, Gemfan 1611 3-Blade propellers and optimized frame, the Pavo Femto boasts an impressive thrust-to-weight ratio of 6.75:1. Its compact, lightweight build ensures agility and stability, making it the ultimate 2S 4K pocket drone

Pavo Femto Frame Kit: The Pavo Femto brushless whoop frame is designed for performance and durability, offering a 4% thrust increase in a compact structure. It features improved connections between the whoop duct and carbon fiber plate with added supports and limits for secure assembly. Optimized for the DJI O4 Air Unit, it includes a reinforced protective structure for the circuit board 4% Thrust Boost: Inspired by rocket engine nozzle design, the Pavo Femto Frame optimizes whoop duct aerodynamics with precise height and thickness adjustments. Despite its smaller size, the frame achieves an approximate 4% thrust increase, providing enhanced power and stability. This allows pilots to

As a 2.2'' cinewhoop drone quadcopter under 150g, the pocket-size Pavo20 Pro is an ideal choice for DJI pilots to enter FPV. Supports various types of HD digital VTX systems like DJI O3 Air unit/Caddx Vista/Runcam Link etc. Exclusively sculpted for FPV freestyle shooting Continuing the frame structure of Pavo20, we improved the whoop duct, combined LAVA1104 7200KV motor, and 2.2'' lower pitch Gemfan 2218 3-blade propeller propulsion system, this equipment offers unparalleled max thrust for freestyle. It achieves a thrust-to-weight ratio greater than 5:1, delivering a faster and more agile freestyle Integrated injection molding HD VTX mounting bracket, has a split design that makes it

Pavo20 is an ideal choice for small indoor and outdoor lightweight 2'' DJI O3 cinewhoop under 150g. With its 90mm wheelbase and aggressive power system, its unique whoop duct boosts thrust, also adding a touch of creativity to your shots. Experience the pinnacle of innovation with DJI O3 and embark on a new level of aerial cinematography whether you use the Pavo20 or Pavo Pico. Integrated injection molding HD VTX mounting bracket, has a split design which make it effortless to install for pilots DIY, and explore more possibilities while ensuring HD image quality. The camera side panel and 4-point fixation hole design precisely safeguard the lens, guaranteeing uncompromised lens protection.

【Pavo20 Frame】Integrated injection molding HD VTX mounting bracket eliminates the hassle of adjusting screw tightness, and hassle-free installation. The original transmission antenna can be directly mounted on the frame kit. 【Thickened Whoop Duct】Constructed with a crash-proof PA12 thickened whoop duct. Its reinforced cross-section design enhances the strength and blast resistance, employing the principles of aerodynamics and synergizes flawlessly with an enhanced power system. 【Fixation Design】The camera side panel and 4-point fixation hole design effectively safeguard the lens while allowing for easy installation of ND filters, guaranteeing uncompromised lens protection, and

New BEC Stable HD Image Transmission: Digital image transmission requires higher current, and 1S whoops often fly at voltages as low as 3.3V, placing significant demands on the BEC. To meet these challenges, an advanced BEC has been developed, capable of delivering over 3A of current at ultra-low voltages down to 2.85V ensuring stable digital image transmission even in critical situations Enhanced Continuous 12A ESC: HD image transmission adds weight to 1S whoops, demanding stronger power and greater ESC overcurrent capacity. Our engineers exceeded expectations, delivering a robust ESC with 12A continuous output and 18A peak capacity on the iconic "cross" flight controller. This ensures

Built Tough: BETAFPV Matrix 1S Brushless FC features a robust 1mm-thick circuit board. While slightly heavier, this design enhances durability for everyday training Simplified Installation: BETAFPV Matrix 1S Brushless FC is a true all-in-one flight controller with integrated FC+VTX+OSD+ESC+RX, plus standard motor plugs, making setup and maintenance remarkably easy. Ideal for FPV beginners, this design requires no welding and ensures a smooth installation experience Upgraded Performance: Upgraded with the G473 processor, the Matrix 1S Brushless FC achieves a remarkable 55% increase in computing speed over the F411, delivering swift response for precise racing and complex freestyle

It features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC. Including a new DJI O3 6-pin PMU for easy installation without solder. Improving control with a 20A ESC featuring a single NMOS for continuous current capability. It offers additional UART TX3 and RX3 ports for connecting the external device.

【Performance】Ultralight ELRS Lite receiver has a 2.4GHz Flat SMD ceramic antenna. A solid flat antenna without irregular parts can withstand crashes, making the receiver not so fragile. Perform well in control, range and stability, bringing a good flight experience to pilots 【Weight&Size】New lite receiver with a flat antenna features a 3mm extra-thin board and 0.53g lightweight, which requires less assembly space on drones with limited space 【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range

【Equipment】Cetus Pro brushless quadcopter equipped with a Lite 1-2S Pro 12A ESC brushless Flight Controller, 1102-18000KV brushless motors and 40mm 3-blade props. The auxiliary flight function is greatly reducing the threshold of operating, which is capable of performing diverse freestyle tricks. Highly beginner-friendly and training-friendly 【N/S/M 3 Flight Modes】Normal/ Sport/ Manual are available, which can satisfy the different needs of pilots and adapt to various flight environments. Meanwhile, these 3 modes all support 3 different speeds in SLOW/MID/FAST 【Altitude Hold Function】Altitude hold function enables Cetus Pro brushless quadcopter to Auto-Hover. The quadcopter

【Altitude Hold, Emergency Auto Locking】Altitude hold keeps the drone hovering at a certain height, combining with the LiteRadio 1 that has two centering gimbals, new beginners can easily control the height of the quadcopter. Integrated with a 6-axis IMU (Inertial Measurement Unit) sensor, which enables the quadcopter to ensure flight safeness. The Cetus Lite quadcopter will automatically disarm the motors when a collision is detected. Guarantees pilots' and property safeness 【Effective Protection Frame Design】Safety is important, especially as a gift. The Cetus Lite features a propeller guard design, protecting from users getting hurt. The frame is made of PA12, a high-quality and

This C04 FPV Camera with Cetus V2 VTX Module only compatible for the Cetus X drone which is the Cetus Flight Controll version, this design allows for easy installation and use, no need for professional soldering skills, just Plug & Play The max output power of this C04 camera is up to 25~350mW and with an antenna that output is adjustable for longer-distance flying, miniature and lightweight design at only 4.14g flying. So pilots can fly longer, and farther explore more possibilities, and have fun This C04 camera and VTX module features 1200TVL resolution, a wider 160° FOV, and a 1/3" CMOS sensor, which can record wide beautiful scenes, ensuring high quality and clear images You will

C04 FPV Camera and VTX Module is only suitable for the Cetus X drone drone which is the Betaflight FC version, this design allows for easy installation and use, without the need for professional soldering skills, just Plug & Play The max output power of this C04 camera is up to 350~400mW and with an antenna that output is adjustable for longer-distance flying, miniature and lightweight design at only 4.14g flying. So pilots can fly longer, and farther explore more possibilities, and have fun This C04 camera and VTX module features 1200TVL resolution, a wider 160° FOV, and a 1/3" CMOS sensor, which can record wide beautiful scenes, ensuring high quality and clear images You will receive a

【Equipment】BETAFPV C03 FPV micro camera comes with 1200TVL resolution with Global WDR and 1/3" CMOS sensor, it ensures a high-quality and clear image. 【Performance】2.1mm lens, FOV 160° beyond the wide angle for recording more wide and beautiful scenes. 4:3 aspect ratio, shooting clear dynamic images even in low light conditions, bringing the pilot an excellent visual experience. 【Lightweight】Miniature, and lightweight design, weighing only 1.52g. Completely match with M03 VTX on micro whoop drone quadcopter like Meteor series drones and most of micro whoop drones in the market. Pilots can enjoy good image quality while reducing the weight of the whoop drone.

【Protocol & Firmware】The firmware version of this Cetus X brushless drone is ELRS V3, please make sure all devices connected with this drone use the same protocol and firmware version so that they can bind successfully 【Camera & VTX Module】Cetus X Brushless Quadcopter comes with the C04 FPV Camera VTX Module, please note that this is a Betaflight FC version, and can only install the C04 camera. The Cetus FC version is not compatible with the C04 camera. The camera is just plugged and play, and supports 0°-40° adjustable degrees, please do not adjust the degrees to exceed 40°, otherwise, the camera will break and lose the connection signal and image 【Betaflight