Other Sound & Hi-Fi Monoprice

Save the time and hassle of building Ethernet cables by using fixed length UTP Cat6 Ethernet Network Cables from Monoprice™!
An Ethernet Crossover cable is used to connect two PCs directly together, without using a hub or switch in between. Each cable is made of 24AWG stranded pure copper conductor pairs with 50µm gold plated contacts (short body). Most budget cables skimp with only 10µm. Each cable features color matched, snagless, strain relief boots.
Features:
- Unshielded Twisted Pair (UTP) Category 6 Ethernet cable
- 24AWG stranded, pure bare copper conductors
- 550MHz bandwidth
- Snagless cable boot protects the plug retaining clip
- Wired to the TIA/EIA‑568209;B …

Save the time and hassle of building Ethernet cables by using fixed length UTP Cat6 Ethernet Network Cables from Monoprice™!
An Ethernet Crossover cable is used to connect two PCs directly together, without using a hub or switch in between. Each cable is made of 24AWG stranded pure copper conductor pairs with 50µm gold plated contacts (short body). Most budget cables skimp with only 10µm. Each cable features color matched, snagless, strain relief boots.
Features:
- Unshielded Twisted Pair (UTP) Category 6 Ethernet cable
- 24AWG stranded, pure bare copper conductors
- 550MHz bandwidth
- Snagless cable boot protects the plug retaining clip
- Wired to the TIA/EIA‑568209;B …

Convenient for easy placement on desks, tables, or podiums, Monoprice's Desktop Microphone Stand is ideal for conference, recording, podcast, and streaming applications.
This desktop stand firmly rests in place even while it is being adjusted as it is made of cast iron. The base also has a diameter of 6.25" for stable positioning and features three rubber feet to protect the surface of any table or desk you may place it on.
The stand has a removable 11.5" gooseneck that can support the weight of a variety of microphones.


Updated Mar 24, 2020


Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm. …

Seamlessly adjust the height and positioning of your microphone with this Microphone Stand with Hand-Clutch and Telescopic Boom from Monoprice.
This microphone stand was designed with you in mind and is built with the quality you have come to expect from Monoprice. It features a tripod base with collapsable legs that measures 25" in diameter for excellent stability and portability. It also features a convenient hand-clutch for one-handed height adjustment.


Stage Right™ and the Stage Right logo are trademarks of Monoprice Inc.


Updated Mar 24, 2020


Warning: This product may contain a chemical known to the State of California to cause cancer, birth defects, or other reproductive …

You're out in your yard enjoying your pool or BBQ. You've set up your outdoor sound system so that you can listen to music while you relax. What a hassle it is to go all the way back inside your house just to adjust the volume. Wouldn't it be easier to have a volume controller out in your patio?
Here's your solution: an outdoor speaker volume controller. This specially designed unit comes in a weatherproof, sealed enclosure specifically designed for outdoor installations. A simple rotary design allows you to set your audio to the perfect listening level. The rotary control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.
The water resistant enclosure …

Throw the Sound Block in a bag, trunk, or anywhere cable and misc. audio supplies are stored. The heavy‑duty construction and passive electronics make the Sound Block nearly indestructible. This Direct Interface is extremely versatile as a Lo to Hi‑Z transformer for electric instruments and devices to XLR mic inputs or as Lo‑Hi‑Z to use a microphone with a guitar amp (not recommended only because guitar amps make terrible PAs).
High level outputs from active instruments and even speaker outputs are not a problem when using the ‑20 or ‑40 db attenuator switch. The Sound Block is a very easy to use passive device. Simply plug your 1/4" output …

Convert a Digital Optical Audio signal into a Digital Coaxial Audio signal using this S/PDIF (Toslink®) Digital Optical to Digital Coaxial (RCA) Audio Converter from Monoprice!
The Sony®/Philips® Digital Interface Format allows for both an electrical signal, carried over Digital Coaxial Audio cable, and an optical signal carried over a Digital Optical Audio cable. This converter allows you to connect an optical output to a digital electrical signal. It measures only about 3" x 2" and includes a 6 VDC, 3A AC power adapter.


TOSLINK® is a registered trademark of Toshiba Corporation.
Sony® is a registered trademark of Sony Corporation.
Philips® is a registered trademark …