Multi Power Tools

Drill holes and drive fasteners with ease with the Greenworks POWERALL 24V brushless drill and driver combo kit. The compact, lightweight drill/driver features two-speed transmission, 310 in-lbs of torque, and 1/2" keyless chuck for quick bit changes. Drive the most stubborn fasteners with the 1/4" impact driver. Featuring a powerful brushless motor that provides 2650 in-lbs of max torque, electronic variable-speed control with 3 speed settings, and a 1/4" quick-release coupler for easy bit changes, this lightweight and compact driver is perfect for the most demanding driving and fastening applications. Additional features for both tools include a built-in LED light that illuminates poorly lit …

Drill holes and drive fasteners with ease with the Greenworks POWERALL 24V brushless drill/driver. This compact and lightweight tool features two-speed transmission, 400 in-lbs of torque, and 1/2" keyless chuck for quick bit changes. Additional features include a versatile 18-position clutch that provides torque control to avoid stripping and over tightening screws, built-in LED light that illuminates poorly lit workspaces, and a cushioned overmold grip for comfort and less fatigue. The Greenworks 24V lithium-ion battery provides 20% more power and 35% more runtime (compared to 20-volt products) while delivering fade-free power with no memory loss after charging. The Greenworks POWERALL™ 24V li…

Tackle hard-to-reach branches and hedges with ease with the Greenworks pole saw and pole hedge trimmer combo kit. Polesaw features a 10” bar and chain with automatic oiler that applies oil to the bar and chain to ensure durability and extend the life of the chain. Pole hedge trimmer features dual-action blades for optimal performance and seven-position pivoting head for trimming at multiple angles. Includes 24V 4.0Ah battery with USB port and charger. Included battery powers 150+ Greenworks 24V products.

Pneumatic Tool: Tapered Punch, 6" OAL

Pneumatic Tool: Tapered Punch, 18" OAL

Pneumatic Tool: Smoothing Hammer, 1" Head Width, 6" OAL

Pneumatic Tool: Scraper Punch, 2" Head Width, 24" OAL

Pneumatic Tool: Scraper Punch, 1-1/8" Head Width, 18" OAL

Pneumatic Tool: Scraper Punch, 1-1/8" Head Width, 8" OAL

Pneumatic Tool: Roll Pin Punch, 5/16" Head Width, 6" OAL

Pneumatic Tool: Roll Pin Punch, 3/8" Head Width, 6" OAL

Pneumatic Tool: Rivet Cutter, 1/4" Head Width, 6" OAL

Pneumatic Tool: Pneumatic Hammer, 1" Head Width, 4-1/4" OAL

Pneumatic Tool: Cold, 3/4" Head Width, 7-1/2" OAL

Pneumatic Tool: Chisel & Scraper Set, 1-1/8" Head Width, 8-1/2" OAL

DYNAPAD #11604 5 PACK DYNABRADE PLATEN PADS

Tackle tough scraping applications with DeWalt oscillating scraping blades. Crafted from steel for long life and durability, each blade is compatible with all major oscillating tool brands.

Handheld Buffers & Polishers; Type: Buffer; Type of Power: Air; Speed (RPM): 2700; Handle Type: Right Angle; Pad Dia (Inch): 3; Pad Dia: 3 in; Spindle Thread Size: 3/8-24; Reversible: No; Air Consumption: 4 SCFM; Air Pressure: 90 psi; Air Inlet Thread Type: NPT; Exhaust Location: Rear

Cut-Off Tools & Cut-Off-Grinder Tools; Type of Power: Pneumatic; Wheel Dia: 4 in; Handle Type: Right Angle; Air Consumption: 5.1 SCFM; Speed (RPM): 14000; Air Inlet Size: 1/4 NPT in; Wheel Dia (Inch): 4; Air Pressure: 90.0 psi; Wheel Included: Yes; Exhaust Location: Rear

Abrasive Finishing Tools; Tool Type: Finishing Sander; Speed (RPM): 3500; Horsepower: 0.50 hp; 0.50 hp old; 0.50; Air Consumption: 4 SCFM; Overall Length: 272 mm; 10.7 in; Air Pressure (psig): 90.00; Air Consumption (CFM): 4; Inlet Size (NPT): 1/4

The 565 Multipurpose Cutting Kit allows for sturdy, controlled cuts in a variety of materials, including drywall, laminate, fiberglass, plastic and vinyl siding. The easy screw-on mounting system allows you to install the Dremel cutting kit to your rotary tool in seconds. The depth adjustment quickly sets correct cutting depth up to 3/4 inches deep. Kit includes a multipurpose cutting guide, two drywall cutting bits, and a multipurpose cutting bit.

Dremel oscillating multi-tools and accessories offer novice to pro home renovators the solutions to tackle any project both inside and outside the home. Known for versatility, Dremel oscillating is limitless in application: cut, sand, grind, scrape, plus remove grout and rust. The Dremel MM35 provides 3.5 AMPs of power to complete the toughest jobs. The wrench-free accessory change system is convenient for quick accessory swaps so you can go from cutting to sanding to grout removal in a matter of seconds. The variable speed dial ranges from 10,000-21,000 OMPs, providing the control needed for various applications and materials. Ergonomic soft grip provides extended comfort for those longer days …

MultiMaster MM 500 Plus Start Oscillating multi-tool. The powerful MultiTool for interior work and renovation with accessories for sawing in wood and metal, sanding, removing tiles and much more. Softgrip zone provides optimal handling. With its StarlockPlus tool mount you have access to over 100 Fein accessories in the Starlock and StarlockPlus performance classes. StarlockPlus tool mount with outstanding torque transfer, fits all Starlock, StarlockPlus and StarlockMax accessories.

Multi-Use Saw Blade: Use with Fein Multimaster