Power Tool Batteries & Chargers

The Mavic Intelligent Flight Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low. The advanced Charging Hub optimizes charging to improve efficiency.<b> Note: </b>The Battery Charging Hub does not include a charger. Please use it together with a standard charger.

The DJI Part 12 100W AC Power Adaptor Cable is specially designed for Phantom 4 Quadcopter (United Kingdom & California).

Use these Self-Securing Closure battery straps to keep your battery from moving around in your RC cars, trucks, helis, and planes! There are three Self-Securing Closure battery straps in this pack so you can use them on different vehicles or use multiple straps to securely tie down large batteries.

This charging adapter is perfect for soldering on your own connector to match up with whatever battery you have. Features 4mm banana plugs on one end and tinned wire on the other. It also uses a thick 12AWG wire that can be used with high current connectors.

The E-flite 150mAh 1S 3.7V 25C LiPo Battery is designed for use with Blade, ParkZone, HobbyZone Ultra Micro Radio Control Helicopters and Airplanes.

The DJI Battery Insulation Sticker is specially designed for Inspire 2 Drone (Part 35).

Power up your electronic components with a long-lasting Energizer battery

Use these Self-Securing Closure battery straps to keep your battery from moving around in your RC cars, trucks, helis, and planes! There are three Self-Securing Closure battery straps in this pack so you can use them on different vehicles or use multiple straps to securely tie down large batteries.

Protect your investment with Venoms XT90-S Female and Male Connector Set with Anti Spark Technology. Built in spark arrest technology helps to protect against current spikes and premature connector erosion that can lead to ESC failure. The XT90-S positive connector has a low current section to allow for a spark free initial connection. Two small tabs are then depressed so that the connector can be fully seated. Made from high temperature nylon and featuring gold plated 4.5mm spring connectors, the XT90-S provides a solid connection for applications up to a constant 90 amps and peak 120amps. The XT90-S Male Battery Connector is also compatible with standard XT90 Battery Connectors. Excellent

The DJI Part 12 100W AC Power Adaptor Cable is specially designed for Phantom 4 Quadcopter (United Kingdom & California).

This 3.7V 380mAh 20C lithium polymer (Lipo) battery is a perfect fit for all versions of the Hubsan X4 quadcopter, including the H107L, H107C camera version and H107D FPV version. These batteries are a drop-in replacement, no modifications necessary!

Power up your electronic components with a long-lasting Energizer battery

Our car pack balance harness for 2-cell lipo batteries features a CSRC/Align/E-flite-style balance connector, plus discharge leads so you can solder on the connector of your choice. Perfect for use both in your car and with your charger or balancer.

Tattu 3S1P 75C 11.1V 650mAh LiPo Battery with XT30 plug works with multi rotor FPV from size 90 to 180, torrent 110, lizard 95 etc. These Tattu 650mAh 3S LiPo batteries provide high quality, reliable power for your multirotor FPV from size 90 to 180. The 650mAh capacity gives you just enough power to fly your UAV and FPV flying fun. They are very compact in size and weight, perfect for small size UAV/FPV frames. These batteries are selling in very decent price so you can stock enough for you who day flying fun without too much pressure.

The RoboMaster S1 AC Power Cable can be used with the RoboMaster S1 Charger to connect the charger and power source to charge the battery.