Staple Guns & Nailers

2 to 3-1/2" Nail Length, 0.113 to 0.148" Nail Dia, Framing Air Nailer

This 28 degree wire weld framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. Depend on this 28 degree wire weld framing nailer for efficiency.

Our 23-gauge pin nailer sets 2-in nails recessed into trim and finish materials, including oak and other dense wood. Innovative features like tool-free jam release and depth adjustment help you keep working without stopping to look for a hex key.

Help increase productivity with the DEWALT 21 degree Extended Magazine, which holds 2 strips of nails. This attachment is constructed from high-strength magnesium for durability. Easily attach this extended magazine on the compatible DCN920 DEWALT 20V MAX XR 21 Degree Plastic Collated Framing Nailer (sold separately).

The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4 in. narrow crown staples from 1/2 in. to 1-1/2 in. which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN681 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

The DeWalt DCN680 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery, the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. The maximum initial battery voltage (measured without a workload) is 20 volts.

The DeWalt 18 gauge narrow crown stapler drives 18 gauge 1/4 inch narrow crown staples from 1/2 inch to 1-1/2 inch which makes it ideal for cabinetry, furniture, paneling and flooring underlayment. With its brushless motor powered by a DeWalt 20V MAX lithium-Ion battery. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.

The DeWalt DCN662 20V MAX XR 16 Gauge straight finish nails from 1-1/4 in. to 2-1/2 in. which makes it ideal for fastening baseboards, door/window casing, and crown molding. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of a cordless tool. The maximum initial battery voltage (measured without a workload) is 20 volts.

The DeWalt DCN660 16 Gauge angled finish nails from 1-1/4 in. to 2-1/2 in. which makes it ideal for fastening crown molding, casing and baseboards. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 volts.

"The DeWalt DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4"" to 2-1/2"" which makes it ideal for fastening crown molding, casing and baseboards. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18."

The DeWalt DCN650 15 Gauge angled finish nails from 1-1/4 in. to 2-1/2 in. which makes it ideal for fastening crown molding, casing, baseboards and hardwood floor installation. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery, the DCN650 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of a cordless tool. Maximum initial battery voltage (measured without a workload) is 20 volts.

"The DeWalt DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4"" to 2-1/2"" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18."

The DeWalt 20V MAX cordless cable stapler is built for residential wiring applications, primarily fastening Romex brand wires and cables. This stapler has a proprietary cable guide that helps to drive staples over cable. The compact frame and lightweight design are ideal for tight spaces. A center-mounted LED light helps to eliminate shadows and illuminate the work area in low light conditions.

This 20V MAX 15 deg Cordless Coil Roofing Nailer delivers cordless convenience ideal for service repairs and small jobs. There are absolutely no hoses, compressors, or gas cartridges required. It’s 100% battery-powered so the pro can show up and get to work right away. The 20V MAX 15 deg Coil Roofing Nailer can drive the full range of roofing fasteners from 3/4 in. to 1-3/4 in. Get the job done quickly and efficiently with bump actuation mode and tool-free depth adjustment that provides precise nail placement.

Ideal for service repairs and small jobs, this 20V MAX 15° Cordless Coil Roofing Nailer delivers cordless convenience. There are absolutely no hoses, compressors, or gas cartridges required. It is 100% battery-powered so the pro can show up and get to work right away. The 20V MAX 15° Cordless Coil Roofing Nailer can drive the full range of roofing fasteners from 3/4 in. to 1-3/4 in. Get the job done quickly and efficiently with bump actuation mode and tool-free depth adjustment that provides precise nail placement.

Complete finish, trim, and remodeling work with this Atomic Compact Series 20V MAX Brushless Cordless 23 Ga. Pin Nailer. The battery-powered nailer is designed to drive 23 Ga. pin nails, measuring between 5/8 in., and 1-1/2 in., with its high-output brushless motor. Take advantage of cordless convenience as you seamlessly drive nails with no hoses, compressors or gas cartridges required.

Complete finish, trim, and remodeling work with this Atomic Compact Series 20V MAX Brushless Cordless 23 Ga. Pin Nailer. The battery-powered nailer is designed to drive 23 Ga. pin nails measuring between 5/8 in. and 1-1/2 in. with its high-output brushless motor. Take advantage of cordless convenience as you seamlessly drive nails with no hoses, compressors, or gas cartridges required. Battery and charger not included.

The Paslode CS-5000 Compression Stapler system was designed for the professional. This stapler's adjustable power feature controls the firing force needed for the specific job application. Make sure to optimize this stapler's performance with genuine Paslode 5000 Series Staples.

Best for sheathing, house wrap, composite roofing, roofing felt, corrugated containers, foam insulation board, furniture/cabinet frames and butt-joints.

Combining true pneumatic feel, speed and power with the convenience of a cordless. The F-18XP delivers the ultimate in Jobsite efficiency, leaving behind noisy compressors, tangled air hoses and expensive fuel cells. The F-18XP drives 5/8 in. - 2-1/8 in. 18-gauge AX and AY style brad nails into the hardest substrates, fires up to 650 shots per charge and features a lightweight, durable design for all-day use. Ideal for the professional contractor, remodeler, any finish and trim project where cordless convenience is essential.

This 18 Gauge Finish Stapler Kit requires little maintenance. Choose between sequential and contact operation with selectable trigger system. Depend on this finish stapler kit for efficiency and convenience.

The DEWALT DWFP1838 18-Gauge narrow crown stapler is ideal for most finish or trim nailing applications. The DWFP1838 is backed by a DEWALT 7-year limited warranty for added peace of mind.

SHF200 mallet actuated pneumatic 2 in. Flooring Cleat Nailer provides consistent driving power for a flush, professional-quality installation. It uses 1-1/2 to 2 in. L-shaped cleats that hold the wood securely yet allow for seasonal expansion and contraction. The long ergonomically designed handle helps minimize user fatigue. Includes a mallet and is ready for use straight from the box.

The Arrow PT50 delivers serious pneumatic tool performance at a price everyone will love. Packed with features like an easy-load magazine, over molded comfort grip, adjustable exhaust cover and contact safety this tool has the power and versatility to tackle any home project. And, it’s capable of bump firing to speed big jobs along. PT50 comes with all necessary fittings and operates on home compressors up to 120 PSI.