Staple Guns & Nailers DeWALT

The DEWALT Pneumatic Brad Nailer is ideal for most trim nailing applications and drives 18-Gauge brad nails from 5/8 in. x 2-1/8 in. L. It features a tool-free depth of drive adjustment for nail heads and a selectable trigger for sequential or contact actuation. Precision Point Technology offers precise nail placement due to a smaller nose.

Power Staplers; Capacity: 140 Staples; Crown Size (Inch): 1; 1 in; Staple Gauge: 16 ga; Crown Width: 1 in; Maximum Leg Length: 2 in; Minimum Leg Length: 1 in; Inlet Size (Inch): 1/4; Includes: DW451 Stapler; 1/4" Fitting; Maximum Fastener Length (Inch): 2; Minimum Fastener Length (Inch): 1

Cordless Finish Nailer: 1-1/4 to 2-1/2" Nail Length

The 1 in. Insulated cable staples are designed for use in the Dewalt DCN701 cordless cable stapler. They are UL listed (406A) for common romex (NM Sheathed Cable) and MC (Metal Clad) cable applications. The staple crown is plastic insulated and these fasteners adhere to the National Electrical Code. These staples can also be driven manually using a hammer for tight space applications.

Industrial grade design for high speed and high volume framing applications. Lightweight with enhanced ergonomics and balance for comfort and control. Recoil dampening engine system to minimize recoil. Tool free features: depth-of-drive adjustment for pre

2 to 3-1/4" Nail Length, 0.113 to 0.148" Nail Dia, Framing Air Nailer

Help increase productivity with the DEWALT 21 degree Extended Magazine, which holds 2 strips of nails. This attachment is constructed from high-strength magnesium for durability. Easily attach this extended magazine on the compatible DCN920 DEWALT 20V MAX XR 21 Degree Plastic Collated Framing Nailer (sold separately).

The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4 in. narrow crown staples from 1/2 in. to 1-1/2 in. which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN681 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

The DeWalt DCN680 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery, the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. The maximum initial battery voltage (measured without a workload) is 20 volts.

100% battery powered; eliminates the hassle of using gas, compressor, and hose. Brushless motor maximizes runtime and durability. Micro nose improves line of sight and accuracy of nail placement (compared to DeWalt DC608). Tool-free depth adjustment for precise countersinking of nails. Tool-free jam release to quickly and easily clear nail jams. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Tool-free selectable trigger for sequential or contact actuation modes. Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall. Adjustable belt hook for left or right attachment depending on user preference.

The DeWalt 18 gauge narrow crown stapler drives 18 gauge 1/4 inch narrow crown staples from 1/2 inch to 1-1/2 inch which makes it ideal for cabinetry, furniture, paneling and flooring underlayment. With its brushless motor powered by a DeWalt 20V MAX lithium-Ion battery. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.

The DeWalt DCN662 20V MAX XR 16 Gauge straight finish nails from 1-1/4 in. to 2-1/2 in. which makes it ideal for fastening baseboards, door/window casing, and crown molding. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of a cordless tool. The maximum initial battery voltage (measured without a workload) is 20 volts.

The DeWalt DCN660 16 Gauge angled finish nails from 1-1/4 in. to 2-1/2 in. which makes it ideal for fastening crown molding, casing and baseboards. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 volts.

"The DeWalt DCN660 16 Gauge Angled Finish Nailer drives 16 Gauge angled finish nails from 1-1/4"" to 2-1/2"" which makes it ideal for fastening crown molding, casing and baseboards. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18."

The DeWalt DCN650 15 Gauge angled finish nails from 1-1/4 in. to 2-1/2 in. which makes it ideal for fastening crown molding, casing, baseboards and hardwood floor installation. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery, the DCN650 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of a cordless tool. Maximum initial battery voltage (measured without a workload) is 20 volts.

"The DeWalt DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4"" to 2-1/2"" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18."

The DeWalt 20V MAX cordless cable stapler is built for residential wiring applications, primarily fastening Romex brand wires and cables. This stapler has a proprietary cable guide that helps to drive staples over cable. The compact frame and lightweight design are ideal for tight spaces. A center-mounted LED light helps to eliminate shadows and illuminate the work area in low light conditions.

This 20V MAX 15 deg Cordless Coil Roofing Nailer delivers cordless convenience ideal for service repairs and small jobs. There are absolutely no hoses, compressors, or gas cartridges required. It’s 100% battery-powered so the pro can show up and get to work right away. The 20V MAX 15 deg Coil Roofing Nailer can drive the full range of roofing fasteners from 3/4 in. to 1-3/4 in. Get the job done quickly and efficiently with bump actuation mode and tool-free depth adjustment that provides precise nail placement.

Ideal for service repairs and small jobs, this 20V MAX 15° Cordless Coil Roofing Nailer delivers cordless convenience. There are absolutely no hoses, compressors, or gas cartridges required. It is 100% battery-powered so the pro can show up and get to work right away. The 20V MAX 15° Cordless Coil Roofing Nailer can drive the full range of roofing fasteners from 3/4 in. to 1-3/4 in. Get the job done quickly and efficiently with bump actuation mode and tool-free depth adjustment that provides precise nail placement.

Complete finish, trim, and remodeling work with this Atomic Compact Series 20V MAX Brushless Cordless 23 Ga. Pin Nailer. The battery-powered nailer is designed to drive 23 Ga. pin nails, measuring between 5/8 in., and 1-1/2 in., with its high-output brushless motor. Take advantage of cordless convenience as you seamlessly drive nails with no hoses, compressors or gas cartridges required.

Complete finish, trim, and remodeling work with this Atomic Compact Series 20V MAX Brushless Cordless 23 Ga. Pin Nailer. The battery-powered nailer is designed to drive 23 Ga. pin nails measuring between 5/8 in. and 1-1/2 in. with its high-output brushless motor. Take advantage of cordless convenience as you seamlessly drive nails with no hoses, compressors, or gas cartridges required. Battery and charger not included.

The Heavy Duty Electric 5-in-1 Multi-Tacker takes heavy-duty, narrow flat crown and cable staples, along with 18 GA and 18 GA headless brad nails. Its High/Low power switch allows for tool use with a multitude of materials. It has an integrated wire guide, which allows for accurate stapling over wires.

The DEWALT DWFP1838 18-Gauge narrow crown stapler is ideal for most finish or trim nailing applications. The DWFP1838 is backed by a DEWALT 7-year limited warranty for added peace of mind.

The DEWALT 2in1 Flooring Tool has an ergonomic long handle with a comfortable rubber grip to help you drive 15.5GA Staples & 16GA L-cleats from 1-1/2 in. - 2 in. with ease. Designed for hardwood or engineered flooring, the tool has interchangable base plates (1/2 in., 5/8 in., 3/4 in.) for versatility with a variety of flooring thicknesses. This kit includes interchangable base plates (1/2 in., 5/8 in., 3/4 in.), mallet, wrenches, and 1/4 in. air fitting.