Staple Guns & Nailers

Arrow JT21CM features an all-chromed steel housing, jam resistant mechanism, proven rear load magazine and steel working parts hardened in a 1,500-degree furnace. A rugged coil spring gives this tool the power and performance one would expect from a much larger stapler in a smaller fine wire format. And a convenient staple viewing window indicates when staples are running low.

The T59 Insulated Cable Staple Gun is the pro’s choice when installing data and communication cables. Whether working with Cat 5 cables, RG-59, or RG-6 cables, this tool will secure wires without crimping. A grooved wire guide tracks along the cable, speeding the work and preventing damage.

48" x 6" Horizontal & Vertical Combination Sanding Machine: 12" Disc Dia

48" x 6" Horizontal & Vertical Combination Sanding Machine: 12" Disc Dia

48" x 6" Horizontal & Vertical Combination Sanding Machine: 9" Disc Dia

48" x 6" Horizontal & Vertical Combination Sanding Machine: 9" Disc Dia

48" x 6" Horizontal & Vertical Combination Sanding Machine: 12" Disc Dia

48" x 6" Belt Sanding Machine: Horizontal & Vertical

48" x 6" Belt Sanding Machine: Horizontal & Vertical

42" x 2" Horizontal & Vertical Combination Sanding Machine: 8" Disc Dia

42" x 1" Vertical Combination Sanding Machine: 8" Disc Dia

The Milwaukee staples are intended for use in attaching wire fencing to wood fence posts, as well as securing copper grounding wire to utility poles. These staples are zinc-aluminum coated hot dipped galvanized to ensure corrosion resistance. The staples have barbed and coated divergent staple legs for increased holding power in materials. The diamond crown design allows for use with larger wire sizes and small plastic moldings.

The 1 in. Insulated cable staples are designed for use in the Dewalt DCN701 cordless cable stapler. They are UL listed (406A) for common romex (NM Sheathed Cable) and MC (Metal Clad) cable applications. The staple crown is plastic insulated and these fasteners adhere to the National Electrical Code. These staples can also be driven manually using a hammer for tight space applications.

The Milwaukee staples are intended for use in attaching wire fencing to wood fence posts, as well as securing copper grounding wire to utility poles. These staples are zinc-aluminum coated hot dipped galvanized to ensure corrosion resistance. The staples have barbed and coated divergent staple legs for increased holding power in materials. The diamond crown design allows for use with larger wire sizes and small plastic moldings.

The Milwaukee staples are intended for use in attaching wire fencing to wood fence posts, as well as securing copper grounding wire to utility poles. These staples are zinc-aluminum coated hot dipped galvanized to ensure corrosion resistance. The staples have barbed and coated divergent staple legs for increased holding power in materials. The diamond crown design allows for use with larger wire sizes and small plastic moldings.

Industrial grade design for high speed and high volume framing applications. Lightweight with enhanced ergonomics and balance for comfort and control. Recoil dampening engine system to minimize recoil. Tool free features: depth-of-drive adjustment for pre

With the Paslode PowerMaster Plus framing nailer system, you'll have the job done in no time. Heavy-duty jobs require a heavy-duty nailer with a powerful performance in a lightweight design. That's why the pros turn to the proven performance, durability and driving power only a Paslode pneumatic framing nailer can provide. This low-recoil nailer offers a center of gravity close to the trigger for great balance and less arm fatigue. When used with Paslode framing nails, this nailing system's heavy duty power can help you frame walls faster to bring jobs in on time, every time.

2 to 3-1/4" Nail Length, 0.113 to 0.148" Nail Dia, Framing Air Nailer

2 to 3-1/2" Nail Length, 0.113 to 0.148" Nail Dia, Framing Air Nailer

This 28 degree wire weld framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. Depend on this 28 degree wire weld framing nailer for efficiency.

Our 23-gauge pin nailer sets 2-in nails recessed into trim and finish materials, including oak and other dense wood. Innovative features like tool-free jam release and depth adjustment help you keep working without stopping to look for a hex key.

Help increase productivity with the DEWALT 21 degree Extended Magazine, which holds 2 strips of nails. This attachment is constructed from high-strength magnesium for durability. Easily attach this extended magazine on the compatible DCN920 DEWALT 20V MAX XR 21 Degree Plastic Collated Framing Nailer (sold separately).

The DEWALT DCN681 18 Gauge Narrow Crown Stapler drives 18 Gauge 1/4 in. narrow crown staples from 1/2 in. to 1-1/2 in. which makes it ideal for cabinetry, furniture, paneling, and flooring underlayment. With its brushless motor powered by a DEWALT 20V MAX Lithium-Ion battery the DCN681 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

The DeWalt DCN680 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DeWalt 20V MAX Lithium-Ion battery, the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. The maximum initial battery voltage (measured without a workload) is 20 volts.