Staple Guns & Nailers Metabo

Lightweight and durable, the Metabo HPT NV65AH2M 1-3/4 inch Siding Coil Nailer is a contractor-preferred pneumatic tool with high-performance capabilities. This is an ideal tool for siding, fencing, decking, roof sheathing, and more. The NV65AH2 has everything you need, including a high-capacity magazine, tool-less depth adjustment, a 360 degree exhaust diverter, and a pneumatic drive system. Since it's compatible with wire or plastic-coated nails of varying sizes, the NV65AH2 is a flexible tool that can be used for a wide variety of applications.

The Pin Nailer 23-Gauge Pro Pin Nailer has been designed with the professional carpenter in mind. It can drive 23-gauge pin nails ranging from 1/2 in. to 2 in. in length. The high-grade aluminum magazine not only provides exceptional durability but also prevents jams caused by fastener overlap. The 360degree adjustable rear exhaust has a built-in silencer to reduce noise pollution and direct air exhaust away from user or job site debris. The automatic dry-fire lock-out protects your workpiece by not allowing the tool to operate if there are 6 or less pins in the magazine. The 360-degree adjustable belt hook helps keep the Pin Nailer by your side at all times.

The Pro Brad Nailer 18-Gauge Pro Brad Nailer has been designed with the professional carpenter in mind. It can drive 18-gauge brad nails ranging from 5/8 in. to 2 in. in length. The newly redesigned high-grade aluminum magazine not only provides exceptional durability but also prevents jams caused by fastener overlap. The integrated air duster is convenient allowing the user to quickly clear any dust or debris from their work surface. The automatic dry-fire lock-out protects the workpiece by not allowing the tool to operate if there are no nails in the magazine. The left or right side mountable belt hook helps keep the tool on hand at all times.

The NT65A5M 16-Gauge Pro Straight Finish Nailer has been redeveloped from our classic NT65A3 specifically for the professional carpenter. It can drive 16-gauge straight finish nails ranging from 1-1/2 in. to 2-1/2 in. in length. With its high capacity and high-grade aluminum magazine, the NT65A5M not only provides exceptional durability but also prevents jams and allows for fewer reloads. The NT65A5 is equipped with our unmatched cylinder valve drive system, which not only provides increased durability but also gives it the quickest response and driving speed. The 360-degree adjustable hook helps keep the tool at hand at all times.

The NR90ADS1M framing nailer drives paper collated nails from 2 inch up to 3 1/2 inch in length and features Metabo HPTs next generation industrial design. The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build up, window build up, sub flooring, roof decking, wall sheathing and housing construction.

The NR1890DCSTM 18V Cordless Paper Strip Framing Nailer completely raises the bar for cordless framing nailers. It is designed so you no longer need dirty hoses, loud compressors, or expensive gas cartridges. It's equipped with Hitachi's unique Air Spring Drive System that delivers similar performance as a pneumatic nailer but offers total cordless freedom. It uses sealed compressed air to drive each nail, which results in zero ramp-up time, up to 2 nails driven per second, recoil that feels like a pneumatic nailer, and best of all, there is no refilling of the air tank required. This cordless nailer is ideal for all construction framing applications but is particularly useful for punch-out …

Over the last 70 years, Hitachi Power Tools has become a trusted everyday partner for many of our customers who use our tools on the job and have no time to waste. Metabo HPT will continue that legacy. Products will retain current brand identity: same color, same model numbers, same warranties and the same battery interchangeability. They will be made by the same people, in the same factories, with the same specifications and focus on innovation that customers have come to expect.

The NR83A5M Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking. It is also great for wall sheathing in mobile homes and modular home construction. If depth adjustment is not necessary, see the NR83A5(S)M. The NR83A5M is like the original NR83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A. The NR83A5M relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.

The Full Round Head Framing Nailer (NR83A5S) without Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83A5(S) is like the original NR83A framing nailer that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A. The NR83A5(S) relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power.

The 18V Cordless Plastic Strip Framing Nailer completely raises the bar for cordless framing nailers. It is designed so you no longer need to worry about dirty hoses, loud compressors, or expensive gas cartridges. It's equipped with Hitachi's unique Air Spring Drive System that delivers similar performance as a pneumatic nailer but offers total cordless freedom. It uses sealed compressed air to drive each nail, which results in zero ramp-up time, up to 2 nails driven per second, recoil that feels like a pneumatic nailer, and best of all, there is no refilling of the air tank required. This cordless nailer is ideal for all construction framing applications but is particularly useful for punch-out …

The NV83A5M Round Head Coil Framing Nailer is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general packing and crating work. The NV83A5 is like the original NV83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5M relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power.

"The NT50AE2M 2"" 18-Gauge Brad Nailer is ideal for trim work, furniture building and other finish applications that require precision and performance that the pro and DIY both require. It accepts finish brad nails from 5/8"" in length up to 2"". With a lightweight economical design, this brad nailer is engineered for the toughest jobs."

"The NR90AES1M framing nailer drives plastic collated nails from 2"" up to 3-1/2"" in length and features Metabo HPT's next generation ""industrial design."" The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction."

"The N5024A2 16-Gauge 1"" Wide Crown Stapler is ideal for lathing, sheathing and insulation installation. Its lighter weight (only 4.7 lbs) and cylinder valve firing mechanism provide a powerful response and less user fatigue."

The Metabo HPT N5008AC2M 2 inch 16-Gauge 7/16 inch Standard Crown Stapler is a durable, lightweight, and well-balanced pneumatic stapler. It's ideal for construction work, such as wall sheathing, roof decking, subflooring, modular home building, wooden box construction, and expendable-pallet manufacturing. With a high-capacity magazine, dual firing methods, and adjustable depth of drive, the N5008AC2M Stapler can handle just about any job you throw at it.

The NT65MA4M 15 Gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim, and staircases. Its compact body and angled magazine make for easier placement and operation.