Electrical Wires & Cables

WireGard twist-on wire connectors are designed for general purpose applications requiring the connection of 2 or more copper wires. WireGard connectors feature a straight type Polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high …

Bullet terminals securely attach the female receptacle over the male bullet, while allowing for quick and easy detachment if two wires need disconnected in the future. Often used in automotive applications. Insulated from the barrel to the receptacle end, fully insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Handy box cover used to close a 4 In. x 2 In. handy box. It is also designed to attach devices in a surface-mount industrial or commercial setting. The captive cover screws provide a straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

The Sigma ProConnex Rain-Tight EMT Compression Connectors are used to secure and terminate steel EMT conduit to an outlet box or enclosure in a dry or damp location. They are recommended for indoor and outdoor applications and approved for concrete-tight applications.

GB's WingGard twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric …

The flanged spade terminal has similar features to the spade, but with turned up ends that stay secure even if the mount screw loosens. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Square 1-gang device ring is used with 4 in. square boxes. It is made to mount switches, receptacles, and devices in a variety of settings. The angled slots on the covers compensate for up to 1/2 in. of box misalignment on upright framing members. Additionally, this ring is UL and RoHS compliant for safe use.

The closed end connector is for splicing two or more wires that meet at a junction. Connection secured by crimping. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The Sigma ProConnex knockout seals are used to close exposed holes in an outlet box or metal enclosure. These knock-out seals are of zinc-plated steel construction.

Elbow use with schedule 40 non-metallic solvent weld fittings. Non-metallic, non-conductive, will not rust or corrode. Fittings sold separately. Straight end to belled end.

Rubber grommets cover and cushion hole openings, protecting the cables and wires that pass through from abrasion or damage from sharp corners or edges.

Sigma's weatherproof one-gang blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment one-gang weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

The closed end connector is for splicing two or more wires that meet at a junction. Connection secured by crimping. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Handy box cover used to close a 4 in. x 2 in. handy box. It is also designed to attach devices in a surface-mount industrial or commercial setting. The captive cover screws provide a straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

Disconnect terminals securely attach the female disconnect over the male tab, while allowing for quick and easy detachment if two wires need disconnected in the future. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

Sigma's weatherproof one-gang blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment one-gang weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Bullet terminals securely attach the female receptacle over the male bullet, while allowing for quick and easy detachment if two wires need disconnected in the future. Often used in automotive applications. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The Sigma ProConnex Rain-Tight EMT Compression Connectors are used to secure and terminate steel EMT conduit to an outlet box or enclosure in a dry or damp location. They are recommended for indoor and outdoor applications and approved for concrete-tight applications.

The butt splice connector allows for quick, easy wire insertion to splice wire during a continuous run. Wires insert from both ends and meet in the middle at the built-in wire stop. The connector must be crimped at both ends. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The Sigma ProConnex EMT to NM Couplings provide a transition from EMT conduit to NM cable using a set screw to clamp type connection. These die-cast zinc couplings are suitable for use in dry locations.

The Sigma ProConnex Set Screw Flex Connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure. These die-cast connectors are designed for steel conduit.

Rubber grommets cover and cushion hole openings, protecting the cables and wires that pass through from abrasion or damage from sharp corners or edges.