Electrical Wires & Cables

The locking spade terminal has similar features to the spade, but with an interior notch that locks into place around the stud. Extra force is needed to remove from the stud, deterring accidental removal if the mount screw loosens. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

Cantex 5140108 is a 2 in. Male terminal adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end.

Die Cast Zinc

Others

The flanged spade terminal has similar features to the spade, but with turned up ends that stay secure even if the mount screw loosens. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Handy box cover used to close a 4 in. x 2 in. handy box. It is also designed to attach devices in a surface-mount industrial or commercial setting. The captive cover screws provide a straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

The closed end connector is for splicing two or more wires that meet at a junction. Connection secured by crimping. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Bullet terminals securely attach the female receptacle over the male bullet, while allowing for quick and easy detachment if two wires need disconnected in the future. Often used in automotive applications. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The Sigma ProConnex Set Screw Flex Connectors are used to terminate FMC/RWFMC to a knockout in a dry location box or enclosure. These die-cast connectors are designed for steel conduit.

Rubber grommets cover and cushion hole openings, protecting the cables and wires that pass through from abrasion or damage from sharp corners or edges.

Sigma's weatherproof one-gang blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment one-gang weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Sigma's weatherproof one-gang blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment one-gang weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

WireGard twist-on wire connectors are designed for general purpose applications requiring the connection of 2 or more copper wires. WireGard connectors feature a straight type Polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric …

A section of PVC schedule 40 conduit which as been heated and bent to effect a 45 degree change in direction in a conduit run. Both ends of the bend are spigot (plain) end. Both ends are solvent weld. Can be used above ground or buried and are suitable for concrete encasement.

Rubber grommets cover and cushion hole openings, protecting the cables and wires that pass through from abrasion or damage from sharp corners or edges.

The Sigma ProConnex Rain-Tight EMT Compression Connectors are used to secure and terminate steel EMT conduit to an outlet box or enclosure in a dry or damp location. They are recommended for indoor and outdoor applications and approved for concrete-tight applications.

The closed end connector is for splicing two or more wires that meet at a junction. Connection secured by crimping. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Sigma's weatherproof closure plugs help keep moisture from the electrical wiring by closing unused holes in weatherproof boxes, extension rings or covers.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Cantex 5140048 is a 2 in. schedule 40 female adapter used to transition threaded metal or PVC conduit with one end threaded and the other end socket solvent weld.

The flanged spade terminal has similar features to the spade, but with turned up ends that stay secure even if the mount screw loosens. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The flanged spade terminal has similar features to the spade, but with turned up ends that stay secure even if the mount screw loosens. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.