Electrical Wires & Cables

Cantex 5133824 is a 3/4 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree

The Sigma ProConnex Squeeze Connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. These die-cast zinc connectors are equipped with a tri-combo screw and are suitable for aluminum or steel cable and conduit.

The Sigma ProConnex EMT Compression Couplings are used to connect two lengths of steel EMT conduit. These zinc-plated steep couplings are suitable for indoor applications and approved for concrete-tight applications.

The Sigma ProConnex Conduit Nipples are used in conjunction with locknuts to provide a short raceway between two outlet boxes or metal enclosures.

A connector used to join lengths of conduit pipe. The fitting consist of two female ends with a center stop. Both pieces of pipe should seat at the stop for proper positioning.

Steel metallic round cover with a 1/2 in. knockout in its center is designed to house and protect electrical wiring, switches, and receptacles. It conveniently closes 3-1/2 in. octagon boxes when used as junction boxes. Additionally, this cover is UL listed for safety.

Handy box cover is used to close a 4 in. x 2 in. handy box. It is also designed to attach devices in a surface mount industrial or commercial setting. The captive cover screws provide straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

Cantex 45-deg Conduit elbow in gray color is made of PVC. It has standard conduit bell on one end while the other end is a spigot end. Conduit elbow can be used above ground or buried. It is suitable for concrete encasement.

Split bolt connectors for a minimum of 6 solid wires and a maximum of 10 solid wires are used for tap and wire splicing on copper wires and copper weld conductors. Southwire’s split bolt connectors have a quick-turn threaded body allowing an easy installation.

The Sigma ProConnex Double Snap Lock 90-Degree Squeeze Connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure where a 90-degree bend is required. The patented design has a pre-assembled throat insulator and requires no tools for faster installation. These die-cast zinc connectors are suitable for aluminum or steel conduit.

Cantex 5140046 is a 1-1/4 in. schedule 40 female adapter used to transition threaded metal or PVC conduit with one end threaded and the other end socket solvent weld.

Cantex 5140107 is a 1-1/2 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end.

A handy box cover is designed to attach devices in a surface-mount industrial or commercial setting. The captive cover screws provide a straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

Cantex 5140047 is a 1-1/2 in. schedule 40 female adapter used to transition threaded metal or PVC conduit with one end threaded and the other end socket solvent weld.

The brand for this item is ZORO SELECT Orders $75 or more ship free This item ships directly from Zoro

The brand for this item is ZORO SELECT Orders $75 or more ship free This item ships directly from Zoro

The brand for this item is ZORO SELECT Orders $75 or more ship free This item ships directly from Zoro

Copper

Others

The brand for this item is ZORO SELECT Orders $75 or more ship free This item ships directly from Zoro

Aluminum

Commercial

The brand for this item is ZORO SELECT Orders $75 or more ship free This item ships directly from Zoro

Adapter used with the hub inside a box or enclosure. The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure.