Tool Kits

A high-quality industrial abrasive. Made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring, general purpose and grinding.

A shank with a screw-like head. Used primarily with Dremel polishing bits and accessories. For best results, insert the mandrel all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collect or chuck to hold onto. Simply remove the screw, line up a cut-off wheel or sanding band over the hole in the shank and replace and tighten the screw.

A slim, aluminum tube that provides the optimal grip for holding a bit in a Dremel rotary tool.

A versatile, high quality cutter made of high grade steel. For use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting and inlaying.

A versatile, high quality cutter made of high grade steel for use on wood, plastic and soft metals.

Wheel tip for general purpose use. Non-sparking and softer than steel. Will not scratch soft metals like gold, copper, brass. Pack includes two brass brush accessories.

Tungsten carbide cutters are ideal for shaping, smoothing or removing material from especially hard materials.

Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials.

The only substance harder than tungsten carbide is diamond. Dremel tungsten carbide Cutters are ideal for shaping, smoothing or removing material from especially hard substances, like cast iron, nonferrous metals and hard woods. The 1/8 inch tungsten carbide cutter can be used in virtually any Dremel rotary tool.

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 335-01 plunge router attachment, Dremel 231 sharper/router table and also older router attachments number 230 and number 330. Made of high-speed steel.

Tough and dependable, this ZipBits will help you make quick, controlled cuts in a variety of materials. For increased durability and performance, check out our professional grade XBits. And for hole cuts, xcores are up for the job.

Turn your Dremel rotary tool into a fast, efficient grout removal tool. Carbide grout removal bit gives you just the right amount of power to clean out grout lines so you can replace damaged tiles or update your grout.

Build an instant tool collection with the 186-Piece Vanadium Tool Set by Sharper Image. This collection is ideal for beginners and experts, whether you already have tools or need an extra set. And the chrome vanadium steel is super tough stronger and more rust resistant than carbon steel. Tools are stored in a wheeled aluminum case, arranged in four removable trays. Includes screwdrivers, hex keys, pliers, metric wrenches, metric socket wrenches, a hammer and much more.

16oz Wall Mounted Home Dispensing Can Crusher Beer Soda Cans Smasher Bottle Crushing Recycling Tool with Built-In Bottle Opener - Grey

This plumb bob has a polished lacquer finish that is durable and rust resistant. The steel tip is replaceable. A through hole and screw top simplifies attaching the string to the center of the bob.

AISILIN 16 in 1 Double Ends Multi-bits Interchangeable Screwdriver Tool (7395A)

Dremel's line of Max Life high-performance accessories provides long-lasting performance and impressive durability. The Max Life 408HP Carbide Sanding Drum / Hole Saw Bit is engineered to last 30X longer than the Dremel 408 Sanding Band. The Max Life Carbide Hole Saw Bit functions as both a sanding drum and a hole saw capable of plunge cutting into a variety of materials. Ideal for a variety of materials including ceramic wall tile, hard and soft woods, composites, fiberglass, Masonite boards, rigid foam, gourds, and more. The 1/2 In. (12.7mm) 408HP features a coarse 60-grit carbide abrasive that provides a sanded finish as it cuts. Maximum operating speed is 35,000/min.

The Dremel Carbon Motor Brush Set restores life to your corded rotary tool. These motor brushes are designed for Dremel master mechanic and rotary tool models. They can also be used with Dremel contour sanders. These brushes should be replaced every 60 hours.

Three-piece variety pack for cutting all types of materials - wood, metal, plastic, nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate and ceramic tile. MM482U - Dremel bi-metal blades in wood with nails provide up to 15X life vs standard bi-metal oscillating blades in wood with nails.

The Dremel Versa Corner Brush is perfect for deep cleaning and hard to reach and curved surfaces. The flexible yet sturdy polypropylene bristles can tackle indoor and outdoor applications with ease. Recommended for use with water or a mild cleaning solution.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter. The unique dual interface fits all competitive oscillating tools, including those with a quick change feature. The MM480U Universal Flush Cut Blade can be used to cut the width of 2 x 4s. Flush cut blades are used to make precise cuts for installation of flooring or wall trim. May be used on wood, plastic, drywall and other soft materials.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter! The unique dual interface fits all competitive oscillating tools, including those with a quick change feature. The Dremel MM485U Universal Carbide Flush Cut Blade has high-performance carbide teeth designed to cut hard and abrasive materials like nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more. Its wide 1-1/4 in. blade speeds through long cuts and can make plunge cuts up to 1-11/16 in. deep.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter! The unique dual interface fits all competitive oscillating tools, including those with a quick change feature. The Dremel MM485U Universal Carbide Flush Cut Blade has high-performance carbide teeth designed to cut hard and abrasive materials like nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more. Its wide 1-1/4 in. blade speeds through long cuts and can make plunge cuts up to 1-11/16 in. deep.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter! The unique dual interface fits all competitive oscillating tools, including those with a quick change feature. The Dremel MM482U Universal Wood & Metal Flush Cut Blade is ideal for cutting doorjambs and baseboards for flooring installation. Used for precise cuts and plunge cuts, its wide 1-1/4 in. blade speeds through long cuts and can make plunge cuts up to 1-5/8 in. deep. Designed for cutting wood, drywall, plastic and soft metal like copper and 6d-8d finishing nails. The blade tooth pattern is similar to a standard hacksaw blade.