Tool Kits

Dremel's line of Max Life high-performance accessories provides long-lasting performance and impressive durability. The Max Life 408HP Carbide Sanding Drum / Hole Saw Bit is engineered to last 30X longer than the Dremel 408 Sanding Band. The Max Life Carbide Hole Saw Bit functions as both a sanding drum and a hole saw capable of plunge cutting into a variety of materials. Ideal for a variety of materials including ceramic wall tile, hard and soft woods, composites, fiberglass, Masonite boards, rigid foam, gourds, and more. The 1/2 In. (12.7mm) 408HP features a coarse 60-grit carbide abrasive that provides a sanded finish as it cuts. Maximum operating speed is 35,000/min.

The Dremel Carbon Motor Brush Set restores life to your corded rotary tool. These motor brushes are designed for Dremel master mechanic and rotary tool models. They can also be used with Dremel contour sanders. These brushes should be replaced every 60 hours.

Three-piece variety pack for cutting all types of materials - wood, metal, plastic, nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate and ceramic tile. MM482U - Dremel bi-metal blades in wood with nails provide up to 15X life vs standard bi-metal oscillating blades in wood with nails.

The Dremel Versa Corner Brush is perfect for deep cleaning and hard to reach and curved surfaces. The flexible yet sturdy polypropylene bristles can tackle indoor and outdoor applications with ease. Recommended for use with water or a mild cleaning solution.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter. The unique dual interface fits all competitive oscillating tools, including those with a quick change feature. The MM480U Universal Flush Cut Blade can be used to cut the width of 2 x 4s. Flush cut blades are used to make precise cuts for installation of flooring or wall trim. May be used on wood, plastic, drywall and other soft materials.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter! The unique dual interface fits all competitive oscillating tools, including those with a quick change feature. The Dremel MM485U Universal Carbide Flush Cut Blade has high-performance carbide teeth designed to cut hard and abrasive materials like nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more. Its wide 1-1/4 in. blade speeds through long cuts and can make plunge cuts up to 1-11/16 in. deep.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter! The unique dual interface fits all competitive oscillating tools, including those with a quick change feature. The Dremel MM485U Universal Carbide Flush Cut Blade has high-performance carbide teeth designed to cut hard and abrasive materials like nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic wall tile and more. Its wide 1-1/4 in. blade speeds through long cuts and can make plunge cuts up to 1-11/16 in. deep.

Dremel universal oscillating accessories are the first truly universal oscillating accessories available that require no adapter! The unique dual interface fits all competitive oscillating tools, including those with a quick change feature. The Dremel MM482U Universal Wood & Metal Flush Cut Blade is ideal for cutting doorjambs and baseboards for flooring installation. Used for precise cuts and plunge cuts, its wide 1-1/4 in. blade speeds through long cuts and can make plunge cuts up to 1-5/8 in. deep. Designed for cutting wood, drywall, plastic and soft metal like copper and 6d-8d finishing nails. The blade tooth pattern is similar to a standard hacksaw blade.

A versatile, high quality cutter made of high grade steel for use on wood, plastic and soft metals.

1/4 inch slot three wing slotting cutter producing slots and grooves for T-moldings, spline joints, tongue and groove joints and many other applications. Should be used with Freud's slotting cutter arbors 60-100 for 1/4 inch shanks and 60-102 for 1/2 inch shanks.

The Rotozip WD1 1/4 inch window and door drywall cutting bit is to be used with a power tool to help cut window and door drywall. For faster window and door opening cuts in drywall. Also works in foam board. It features a silver-metallic color.

A high speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. Fast cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile.

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel number 230 and number 330 router attachments and number 231 sharper/router table.

Dremel 953 aluminum oxide grinding stone. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust.

"Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3"" (76.2 mm) cutting length makes straight shearing with the Malco Andy Snip fast and easy. Blade replacement is easily accomplished in the field."

Craftsman Nut Driver brings the convenience and efficiency of a screwdriver to all of your projects involving nuts and bolts. Whether you’re using traditional nuts or stop nuts, this nut driver will quickly fasten or loosen the hardware directly on or off the bolt.

The MILWAUKEE SAE HOLLOWCORE Nut Drivers feature a HOLLOWCORE Shaft, which delivers unlimited depth in threaded rod and long bolt applications. The color-coded markings allow for easy size identification and the wrench-ready steel shanks provide additional leverage for tougher applications. Milwaukee HOLLOWCORE Nut Drivers are backed by Milwaukee's Limited Lifetime Warranty.

Crescent offers a complete line of drivers with acetate handles that are extremely durable and temperature and UV resistant. Designed specifically for electricians, tradesmen and serious DIY users.

Klein has the nut drivers professionals demand to get the job done. The full hollow shaft facilitates work on stacked circuit boards or other long bolt applications. Premium chrome-plated for smooth feel and corrosion resistance. The handle end is color coded for easy identification. The patented Tip-Ident quickly identifies nut driver and size.

1 inch x 1/2 inch Football Shaped Mounted Rotary File with 1/4 inch shank.

For more than 80 years, Forney Industries has been committed to offering products that make your life easier. Whether you are a seasoned welder, rancher, or someone who simply enjoys working in the garage, we offer more than 5,000 products based on what you need, not on what we want to sell.

14-in-1 Watch Repair Tool Set Case Opener Link Remover Screwdriver

The MILWAUKEE Metric HOLLOWCORE Nut Drivers feature a HOLLOWCORE Shaft, which delivers unlimited depth in threaded rod and long bolt applications. The color-coded markings allow for easy size identification and the wrench-ready steel shanks provide additional leverage for tougher applications. Milwaukee HOLLOWCORE Nut Drivers are backed by Milwaukee's Limited Lifetime Warranty.

Lenox Arbors & Accessories is perfect for all your drilling needs