Amplifiers

【High Performance NFCA】The TOPPING L70 amplifier uses an improved NFCA circuit. It achieves a low noise of 0.3uV, a dynamic range of 144 dB, and an impressive THD+N of 0.000055%. Both distortion and dynamic range multi-tone tests are near perfect, so that high fidelity music can be vividly performed on different headphones. 【Compatible with most headphones】The L70 is compatible with common headphone jacks including 4-pin XLR balanced, 4.4mm balanced, 6.35mm single ended, and 3.5mm single ended. L70's output has high output voltage, high output current, low noise, low output impedance. The built-in fully balanced amplifier circuit can not only fit well with balanced headphones, but

Redesigned new NFCA circuit based on the same working principle as the one in A30 Pro. It provides 2x power at 300 Ohm compared to L30. With the help of NFCA, L50 easily reaches the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing. Max output power: 3500mW x@16Ω, 540mW x@300Ω L50 adopts the New NFCA circuit. L50 has three gain options. Covering a wide gain range is sufficient to meet the needs of low-sensitivity full-sized over-ears to high-sensitivity 1EMs. With the help of extremely low noise 0.3uV, even lEMs will not hear any background noise.

Ultra-low THD+N :THD+N of E70 VELVET is already lower than 0.00006% (A-weighted), accurately restores the music to every detail. The three senses are one: In addition to product performance, TOPPINIG also pays attention to the convenience of product aesthetic design and controlling. Hearing, vision and touch have been unified on the E70 VELVET. LDAC 24bit/96kHz Bluetooth transmission :E70 VEL VET has the certification of Hi-Res Audio Wireless and L DAC. It uses newest QCC5125 chipset to support LDACIAAC/SBC/aptX/ aptX LL/aptX HD/aptX Adaptive protocol by Bluetooth 5.1. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect it's digital signal to

Flagship DAC chip AK4499EX, the audio industry's highest performance. Low-noise voltage reference power supply ▶️ The distortion of E70 VELVELVET is as low as-125db and the noise is no higher than 1.3uVrms. LDAC 24bit96kHz Bluetooth transmission ▶️ E70 VELVET has the certification of Hi-Res Audio Wireless and LDAC. It uses the newest QCC5125 chipset to support LDAC/AAC/SBC/aptX/aptX LL/aptX HD/aptX Adaptive protocol by Bluetooth 5.1. Widely compatible ▶️ Newest XU316 supports DSD512&PCM768kHz ,USB input of E70 VELVET has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to

Flagship DAC chip AK4499EX, the audio industry's highest performance. Low-noise voltage reference power supply ▶️ The distortion of E70 VELVELVET is as low as-125db and the noise is no higher than 1.3uVrms. LDAC 24bit96kHz Bluetooth transmission ▶️ E70 VELVET has the certification of Hi-Res Audio Wireless and LDAC. It uses the newest QCC5125 chipset to support LDAC/AAC/SBC/aptX/aptX LL/aptX HD/aptX Adaptive protocol by Bluetooth 5.1. Fully balanced ▶️ The L70 is compatible with common headphone jacks including: 4-pin XLR balanced, 4.4mm balanced, 6.35mm single-ended, and 3.5mm single-ended. The built-in fully balanced amplifier circuit can not only fit well with balanced

【Excellent performance】The E70 uses ESS SABRE DAC ES9028PRO. New XMOS XU316 support DSD512 & PCM768kHz.THD +N of E70 is already lower than 0.00006% (A-weighted ), the music restoration is accurate to every detail. 【LDAC 24bit96kHz Bluetooth5.1】E70 has the certification of Hi-Res Audio Wireless and LDAC. It uses new QCC5125 to support LDAC / AAC /SBC/aptX /aptX LL/aptX HD/aptX Adaptive protocol by Bluetooth 5.1. 【Multiple output ports】E70 has balanced XLR output and single ended RCA output. You can choose"XLR only ", "RCA only "or"XLR + RCA"output to for different applications. In addition to the DAC mode with a fixed output level , the E70 also has a DAC + preamplifier mode .

Super audio reproduction ability with ultra low distortion: The E70 uses ESS SABRE flagship DAC ES9028PRO. ES9028PRO has a 32-bit 8-channel HyperStream II architecture. In the application of E70, every 4 channels are connected in parallel as one channel, achieving high performance and high sound quality at the same time. Brand new IN conversion: A brand new IN conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics SO that we are able to squeeze out the last bit of performance of the DAC chip. Excellent performance: THD+N of E70

ES9068AS DAC Chip--- E50 uses the latest high-performance DAC chip ES9068AS. Our excellence in design and engineering provides realistic and transparent sound quality. The sound quality is good enough for all kinds of applications--- With the help of careful design and adjustment, E50 provides a distortion as low as 0.00009% and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications: high-fidelity PC-HIFI system, mobile phone/tablet OTG, CD player/turntable external DAC, digital broadcasting external DAC, TV DAC, and so on. Ultra-low jitter for USB inputs, jitter is no longer anxious--- Using CPLD to process the clock and greatly

Good Sound Quality - With the help of careful design and adjustment, E50 pro- vides a distortion as low as 0.00009% and a dynamic range of 126dB, providing you with perfect sound quality. This also makes E50 suitable for applications: high-fidelity PC-HIFI system, mobile phone/tablet OTG, CD play- er/turntable external DAC, digital broadcastingexternal DAC, TV DAC and so on “Hearing Is Knowing” - TOPPING E50 uses the latest high performance DAC chip ES9068AS. With our excellence in design and engineering, it provides realistic and transparent sound quality.And USB supports DSD512 & PCM768kHz.USB input has the best performance of E50. It uses XMOS 2nd 16-core processor XU216, which

Supports high-resolution audio▶️ The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD

Supports high-resolution audio: The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD

Supports high-resolution audio: The E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Plug and play:turn your PC into a HIFI source USB input of E30 II has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. Coaxial and

Supports high-resolution audio ▶️ TOPPING E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Improved NFCA ▶️ TOPPING L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N. Best combo for active speakers ▶️ We also recommend that L30II and E30II be used with active speakers. Connect the two outputs of L30ll to headphones and active

Supports high-resolution audio ▶️ TOPPING E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Coaxial and Optical also has good performance ▶️ The optical and coaxial input of E30 II supports up to 24bit192kHz audio, which is suitable for digital turntables, disk players, set-top boxes, and game consoles, so that traditional equipment can also give a new sound. The Digital Processing module provides better compatibility than the E30. 5V power supply,anytime and anywhere ▶️ E30 II uses DC5V for power

Supports high-resolution audio ▶️ TOPPING E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip. Coaxial and Optical also has good performance ▶️ The optical and coaxial input of E30 II supports up to 24bit192kHz audio, which is suitable for digital turntables, disk players, set-top boxes, and game consoles, so that traditional equipment can also give a new sound. The Digital Processing module provides better compatibility than the E30. 5V power supply,anytime and anywhere ▶️ E30 II uses DC5V for power

Six-channel discrete NFCA high-performance headphone amplifier module. DAC / Headphone amplifier circuits are powered independently. Fully ecological interface configuration. Flagship Design. Balance between practicality and aesthetics. The family's curved aesthetics are integrated into the panoramic sunroof design, providing a precise view. Flagship Chipset. Outstanding performance comes from a powerful core. The rare and legendary DAC chip AK4499EQ powers the DX9 to achieve 132dB dynamic range and THD+N

DX7 Pro+ uses ESS SABRE ES9038PRO, with 32bit Hyper-stream architecture, achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by 4 conventional balanced channels. This makes the performance of DX7 Pro+ even better. A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. Close to physical limits: The ability of DX7 Pro+ to restore music has reached to THD+N

DX7 Pro+ uses ESS SABRE ES9038PRO: with 32bit Hyper-stream architecture, achieves ultra-high performance in the audio field. Each channel of the DX7 Pro+ will be arranged in parallel by 4 conventional balanced channels. This makes the performance of DX7 Pro+ even better. Brand new I/V conversion: A brand new I/V conversion circuit is designed for better quality audio reproduction. The unique circuit design provided lower distortion, lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip. Close to physical limits: The ability of DX7 Pro+ to restore music has reached to

● 2 * ES9068AS DAC Chip: With careful engineering and attention to detail of the external engineering team, 0.00009% THD + N can be achieved with 2 x ES9068AS. This gives you untouched sound quality. ● Plug and play to turn your PC into a HIFI source: DX5 has a wide range of compatibility: plug and play. DX5 uses 2nd generation 16-core XMOS XU216 and USB supports up to PCM 32bit 768kHz, DSD512 native and MQA full decoding. ● LDAC 24bit 96kHz Bluetooth transmission: DX5 is Hi-Res Audio Wireless and LDAC certified and supports LDAC / AAC / SBC / APTXIAPTX LAPTX HD protocol using the latest QCC5125 chipset. The QCC5125 DAC connects the digital signal to the 2xES9068AS for decoding. ●

2*ES9068AS DAC Chip: With careful engineering and attention to details from our engineering team, we are able to achieve 0.00009% THD+N by 2 X ES9068AS. This provides pristine sound quality. Plug and play turn your PC into a HIFI source: DX5 Lite has a wide range of compatibility: Windows 10 or above, MAC, Linux, lIOS, Android can be plug and play. DX5 Lite uses 2nd generation 16 core XMOS XU216, USB supports up to PCM32bit768kHz, DSD512 native. L DAC 24bit96kHz Bluetooth transmission: DX5 Lite has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/ AAC/SBC/APTXIAPTX LL /APTX HD protocol. To get even better sound quality from Bluetooth, we

【Bluetooth 5.0 & LDAC Transmission】 DX3 Pro+ is equipped with new QCC5125 Bluetooth chip and supports audio encoding such as LDAC/AAC/SBC/APTX/APTX LL/APTX HD. The audio is transmitted Wirelessly and decoded using ES9038Q2M for better sound quality. 【High Performance DAC Circuit】ES9038Q2M through meticulous engineering design and attention to details, DX3 Pro+ achieves 0.00015% THD+N, completely and high-fidelity restore the sound quality of the studio. 【Plug And Play, Turn PC Into a HIFI Source】Dx3 Pro + uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit/768kHz and DSD512 native. It also compatible with a variety of HIFI systems. And all inputs have achieved

Bluetooth 5.0 LDAC transmission ：DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode. NFCA circuit ：The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely. Pre-amplifier function ：Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier. PA3s

Newest 32bit-AK4493S DAC chip ▶️ The DX1 uses the newest sub-flagship AK4493S chips of AKM's VELVET Sound technology. The DX1 decodes up to 32-bit/384kHz PCM in a stunning 120dB of dynamic range. Powerful Output for IEMs and Full-size headphones ▶️ With high/low gain options and two outputs (6.35mm and 3.5mm), the DX1 is ready for IEMs, full-size headphones, and everything in between. Despite its small size, it can output up to 280mWx2 @32Ω and 51mWx2 @300Ω of power. Plug and Play ▶️ DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, IOS, Android can be plug and play, don't need to install a driver. ( Except Windows ASIO applications) Discrete

AK4493S: The DX1 uses newest sub-filagship AK4493S chips of AKM'S VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Plug and play: turn your PC into a HIFI source DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, I0S, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable. No adapter required: Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply