Climbing Gear

Lightweight and rather compact, the CAMP USA Tethys Pro Small Mobile Pulley easily carries on your harness and attaches to ropes up to 13mm. Like its less-intensive sibling, the Small Mobile Pulley, the Pro features an aluminum alloy body and stainless steel axle for durability on climbs and rescue scenarios. Unlike the Small Mobile Pulley, the Pro uses sealed ball bearings for high efficiency (92%) and intensive use at higher speeds. This pulley is prusik-minding, so it makes for ease in rigging a hauling system on routes or managing emergency rescue situations. Plus, it features a large connection point that accommodates two carabiners, as well as rotating side plates.

Design and Details A premium lightweight draw for all-around climbing Equipped with two Dyon KeyWire carabiners Variable width polyester dogbones are particularly easy to grab while projecting sport routes Features the proprietary Karstop Evo carabiner retainer on the rope end

Design and Details The 10.5mm SafetyPro rope and sewn eyes on each end provides a secure, static positioning option SafetyPro lanyards meet ANSI Z359.3 & Z133.1

The Metolius Climbing Glove 3/4 Finger provides a snug fit and incredible dexterity to create the ultimate climbing glove. A durable cowhide outer molds comfortably to your hand, while split-cowhide reinforcements on the palm and triple stitching will ensure it lasts for seasons come. The Metolius Climbing Glove has a webbing clip-in loop and a hook and loop wrist closure.

The Metolius Climbing Glove 3/4 Finger provides a snug fit and incredible dexterity to create the ultimate climbing glove. A durable cowhide outer molds comfortably to your hand, while split-cowhide reinforcements on the palm and triple stitching will ensure it lasts for seasons come. The Metolius Climbing Glove has a webbing clip-in loop and a hook and loop wrist closure.

Design and Details Lightweight personal anchor system for fast ascents Over 40% lighter than the original Safe, adjustable alternative to slings or quick draws that also stores compactly Chain-link-style construction eliminates the risk of pocket failure that is inherent in daisy chains Sling Webbing Personal tether only Strength: 14 kN (3150 lbf) Length: 36.5" (93 cm)

The Metolius Climbing Glove 3/4 Finger provides a snug fit and incredible dexterity to create the ultimate climbing glove. A durable cowhide outer molds comfortably to your hand, while split-cowhide reinforcements on the palm and triple stitching will ensure it lasts for seasons come. The Metolius Climbing Glove has a webbing clip-in loop and a hook and loop wrist closure.

Design and Details H-profile construction ensures best possible use of material and minimal weight One bullet carabiner and one bulletproof carabiner with keylock closure for optimal handling when clipping/ unclipping Steel insert in lower carabiner prevents premature wear due to rope friction High-strength 15/ 22 mm narrow/wide polyamide quickdraw sling Antitwist fixing to hold lower carabiner in place

Like many standard belay devices, the DMM Pivot is made from tough and lightweight aluminum, with two friction options to help us fine-tune our rappel speed. Unlike other devices, the Pivot sports a hinged guide-mode loop that provides some extra leverage and smooth action when we need to lower our second off the belay ledge.

Edelrid's HMS Bulletproof Triple FG Locking Carabiner is built to outlast the rest in its class. The aluminum body keeps weight low, while the steel rope-bearing apex resists wear for a boost in longevity. With an auto-locking gate and belay retainer, this 'biner also gives us the best in safety.

Design and Details High strength Hot forged Versatile compact design Screw gate Keylock nose prevents snagging Solid straight gate I beam back Optimised for optimum strength/weight ratio

The Sender Wire Rackpack is a crew of smooth operators. From dusty desert routes to shimmering icefalls, the gram-saving wire gates open and close with grace, not letting grit or cold trip them up.

DESIGN & DETAILS: A classic Black Diamond Alpine Hammer, compatible with the current Viper Ice Tools Weight: 2.8 oz

Trango reached into an old-school climber's closet to give you the highly versatile and inexpensive Ballnutz. These sliding ball-and-ramp pieces lie between active and passive protections, and they fit in places that cams and stoppers can't, like parallel cracks and thin fissures. With more placement options than a nut and a smaller price tag than any spring-loaded camming device, you simply can't go wrong with the Ballnutz.

DESIGN & DETAILS: Contains the essentials for belaying & rappelling Includes belay device and a locking carabiner Featuring a redesigned ATC-XP High friction mode on ATC-XP delivers 3X greater hold Weighs in at 133 g (4.7 oz.)

For your first canyoning experiences! Designed for group use or learning, the PIRANA CLUB is an adjustable friction descender for canyoning. It has three rope installation options and allows you to adapt the degree of friction before initiating a descent. It works well when used right-handed or left-handed. The plastic ring makes rope installation easier, keeping the device connected to the harness and limiting the risk of dropping the device.

Design and Details Portable training rail goes anywhere Ideal for warming up at the crag Skin-friendly wood Reversible design yields four different holds in an incredibly compact package Can be mounted with four screws (included) Size: 18€ x 3€ x 1.5€

The Metolius Belay Glove gives the belayer a huge advantage when controlling the rope in the event of a fall or while rappelling. The Metolius Belay Glove provides a snug fit and incredible dexterity. A durable cowhide outer molds comfortably to your hand, while split-cowhide reinforcements on the palm and triple stitching will ensure it lasts for seasons come. The Metolius Belay Glove has a webbing clip-in loop and a hook and loop wrist closure.

Not only does the Petzl Reverso Belay Device give you serious stopping power when you're holding massive whippers, but it also functions as an auto-locking device when you're belaying the following climber directly off the anchor. This allows you to re-rack, tie your shoes, sip some water, and take a few photos without risking your climbing partner's life. Belaying two followers at once? No problem. Rappelling 15 pitches? The deep grooves give you plenty of control. Petzl also added a secondary clip-in point to help you release a locked rope if you need to lower a follower who has fallen.

Design and Details One of the lightest carabiners on the market Designed for fluid use with ropes of all diameters Significantly reduces weight and bulk on any rack The design increases strength and reduces weight Available in 8 colors with a new bright finish to coordinate with the most popular cam colors

Design and Details Made with double-wrapped 11 mm Monster webbing. Because of its chain-link-style construction, it is safer, more convenient, and more adjustable than using slings, quickdraws, or daisy chains at the anchor. It can also be used to equalize anchors. Weight: 3.3 oz. Strength: 22 kN Length: 38" CE/UIAA certified

Trango reached into an old-school climber's closet to give you the highly versatile and inexpensive Ballnutz. These sliding ball-and-ramp pieces lie between active and passive protections, and they fit in places that cams and stoppers can't, like parallel cracks and thin fissures. With more placement options than a nut and a smaller price tag than any spring-loaded camming device, you simply can't go wrong with the Ballnutz.

Design and Details Size Range: 11.0 - 15.0 mm (0.43 - 0.59 in) Weight: 71.0 gm (2.5 oz) Strength: 8 kN