Climbing Gear

Main characteristics: ergonomic shape for an optimal handling, opening system that allows to clip and unclip into protections using one hand; easy to use by children; double gate automatic locking, extremely quick and safe; large clearance for hooking onto big diameter wires; catch-free nose to avoid snagging when clipping and unclipping; with stainless steel wear-proof protection, for a enhanced resistance to abrasion on wire cables. Sizes 135 x 70 mm Weight 125 g

Carabiner Swivel Short   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

High braking performance assists the belayer with leader falls Small eyelet for releasing unit with a carabiner when bringing up your partner For belaying a leader or bringing up 2 seconds, also suitable for abseiling Rope can be paid out faster to a leader by holding device in the ‘open’ position with the thumb Robust solid stainless steel construction Suitable for 7.9–10.5mm ropes TECHNICAL SPECIFICATIONS Approved rope diameter: 7,9 - 10,5 mm Certification : EN 15151-2 Country of origin : Germany Material : Steel Manual: Yes

This equipment has been made as anchoring device, which consists of load bearing and winded steel wire ropes as a core, and outside tube, which protects the core and keeps wire ropes together. The construction of this device gives an extra safety against mechanical damage, rather than regular textile sling. The breaking force of this equipment exceeds all requirements of above mentioned standard and is more than 50 kN. The sling has a core inspection hole with a pocket, which allows making a full inspection of the condition of the whole internal wire rope. Lengths avalable 1,0M/1,5M/2,0M In compliance to EN 795 : 2012 type B

NLG Tether Tape™ uses advanced self-fusing silicone technology to create load rated tether points on any tool within seconds. As most tools are not designed with a manufactured attachment point, NLG’s Instant Tether System™ uses Tether Tape™ and D Rings to quickly retrofit tether points, ready for any tool lanyard to connect to. No heat source or other specialist tools are required to fit Tether Tape™ as it is simply activated by stretching. It fully bonds to itself within 24 hours at room temperature, but is tested and certified for immediate use. Because no adhesive is used in the process, the retrofitted tool tether can be easily removed when no longer required, leaving no

NLG Tether Tape™ uses advanced self-fusing silicone technology to create load rated tether points on any tool within seconds. As most tools are not designed with a manufactured attachment point, NLG’s Instant Tether System™ uses Tether Tape™ and D Rings to quickly retrofit tether points, ready for any tool lanyard to connect to. No heat source or other specialist tools are required to fit Tether Tape™ as it is simply activated by stretching. It fully bonds to itself within 24 hours at room temperature, but is tested and certified for immediate use. Because no adhesive is used in the process, the retrofitted tool tether can be easily removed when no longer required, leaving no

FEATURES – Holds two smaller diameter lines or one 11 mm – Expandable design to manage ropes – Shoulder straps, two-point suspension and a waterproof bottom

FEATURES – ATC-XP belay/rappel device – Screwgate carabiner – High friction mode on ATC-XP offers 3 times greater hold and stopping power than regular friction mode

This equipment has been made as safety lanyard and anchor sling, which consists of load bearing yarns as a core and outside tube, which gives the equipment compact shape and protects the core. The breaking force of this equipment exceeds all requirements of above mentioned standards and is more than 100 kN. In compliance to EN 354 : 2010; EN 795 B : 2012

Description Multipurpose and easy to use: - classic belay technique with both hands on the rope - ropes glide smoothly through the device - can be used for rappels - Reverso mode for belaying one or two seconds; commonly used on multi-pitch climbs - independent and simultaneous belaying of two seconds in Reverso mode - while belaying in Reverso mode, a carabiner placed in the release hole allows the belayer to give slack when the device is under tension - rope installation diagrams for belaying and Reverso mode are engraved on the device Adapted to a broad range of rope diameters: - V-shaped friction grooves enable controlled braking - compatible with dynamic single ropes 8.5 to 10.5

Description May only be used with an ASAP or ASAP LOCK mobile fall arrester Allows the user to keep the rope at a distance in order to: - free up the work area - protect the rope from sharp tools and harmful contact points Absorbs energy in case of a fall: - tearing of the energy absorber webbing limits the impact force on the user - designed for users who weigh between 50 and 130 kg - durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion Available in two lengths, to

Description Multipurpose and easy to use: - classic belay technique with both hands on the rope - ropes glide smoothly through the device - can be used for rappels - Reverso mode for belaying one or two seconds; commonly used on multi-pitch climbs - independent and simultaneous belaying of two seconds in Reverso mode - while belaying in Reverso mode, a carabiner placed in the release hole allows the belayer to give slack when the device is under tension - rope installation diagrams for belaying and Reverso mode are engraved on the device Adapted to a broad range of rope diameters: - V-shaped friction grooves enable controlled braking - compatible with dynamic single ropes 8.5 to 10.5

Captive eye for permanent connection Sometimes it is essential for a connector to stay in the correct orientation or to be permanently attached to a system. The DMM captive eye connectors, with their textile friendly attachment holes, can be stitched into a rope or webbing loop, or swaged directly onto cable. They provide predicable direction of load and total security as the connector cannot be removed or misaligned. Keylock clean nose for snag free connection DMM's patented 'Taperlock' closing mechanism increases gate push-in and cross gate strength using a special flared profile on the nose of the carabiner, as well as allowing a snag free connection for your ropes, slings and

Carabiner Director Captive Eye Ls

Nylon construction Length adjusts easily with top buckle Adjustable elastic foot capture 119 g