Climbing Gear

Despite its low weight, the Mantis is a high-performance belay device, giving confident control over ropes from 11mm down to a super skinny 7.3mm. Ideal for those looking for a single belay device for all their climbing activities.

Easy to operate with one hand, and able to locate on the belay loop in a single movement, the Ceros is intuitive to use and simple to rack. Correct orientation is achieved with an internal wiregate that keeps the Ceros captive on a belay loop, and a horn which prevents assisted braking devices moving onto the carabiner’s spine. Full section top bar gives smooth rope control and resists wear.

A large, yet lightweight, HMS carabiner with a short gate to maximise gate opening. The deep and wide top basket can take three clove hitches (

The perfect mid-size Offset D for situations where small size and volume are important i.e. confined spaces or tower climbing situations where the overall weight and size of a system is crucial. The Shadow gives plenty of security reserves whilst feeling featherweight on a harness or in a bag.

Easy to operate with one hand, and able to locate on the belay loop in a single movement, the Ceros is intuitive to use and simple to rack. Correct orientation is achieved with an internal wiregate that keeps the Ceros captive on a belay loop, and a horn which prevents assisted braking devices moving onto the carabiner’s spine. Full section top bar gives smooth rope control and resists wear.

Product Name Product Code Colour Strength Weight Range Certification HB Brass Offset 0 A1700 Gold 2kN 4g 3.7 / 5.5mm EN12270:2013 HB Brass Offset 1 A1701 Blue 4kN 7g 4.3 / 6.5mm EN12270:2013 HB Brass Offset 2 A1702 Red 5kN 9g 5.6 / 7.5mm EN12270:2013 HB Brass Offset 3 A1703 Silver 5kN 10g 6.0 / 8.5mm EN12270:2013 HB Brass Offset 4 A1704 Purple 7kN 14g 7.5 / 10.2mm EN12270:2013 HB Brass Offset 5 A1705 Green 7kN 17g 8.6 / 11.7mm EN12270:2013 HB Brass Offset 6 A1706 Silver 10kN 24g 9.8 / 13.9mm EN12270:2013 HB Brass

These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.IMP's are invaluable for those pushing into harder grades and need to take advantage of all protection options. Product Name Product Code Colour Strength Weight Range Certification IMP Brass Nut 1 A1721 Blue 4kN 4g 4.0 / 5.6mm EN 12270:2013 IMP Brass Nut 2 A1722 Red 5kN 8g 4.8 / 6.4mm EN 12270:2013 IMP Brass Nut 3 A1723 Silver 5kN 10g 6.4 / 7.9mm

Ocean Polyester Loop is a hitch cord sewn into an endless sling. The machine-stitched rope connection takes this cord to a higher quality level than a knotted connection would.    Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

Main characteristics: oval shape for optimal positioning of pulleys and clamps; particularly suited for use on belay stations, hauling and rescue maneuvers; catch-free nose avoids snagging when clipping and unclipping; with special wear-proof hard coat anodizing, ideal for prolonged and intensive use.

Description Replacement carabiner for TRAC GUIDE trolley extends the trolley’s lifespan Ergonomic shape allows the guide to very quickly install the carabiner/trolley unit on the cable with one hand Optimal durability for easy maintenance and extended product life: reinforced construction and hard anodization for greater resistance to damp and salty environments Available individually or in pack of five Specifications Material(s): aluminum Weight: 105 g

The rope end identification kit can be used to replace old labels or to identify individual ropes for professional uses. It contains twenty pre-printed labels and twenty heat-shrink sheaths compatible with 10.5 to 13 mm ropes. Description Kit can be used to replace old labels or to identify ropes Facilitates identification of individual professional ropes Contents of kit: - twenty pre-printed rot-proof labels, for clearly legible rope details (length, diameter, type, individual number, manufacturer, date of manufacture...) - twenty abrasion-resistant heat-shrink sheaths Compatible with 10.5 to 13 mm diameter ropes Specifications Rope compatibility: 10.5 to 13 mm Label

Description Aluminum carabiner is lightweight to reduce equipment weight carried by the user D shape is particularly suited for connection to equipment such as descenders or positioning lanyards Easier handling: - fluid interior design limits the risk of having a catch point and facilitates rotation of the carabiner - Keylock system to avoid any involuntary snagging of the carabiner H cross-section: - ensures an optimal strength/weight ratio - protects markings from abrasion Available in three different locking systems: - SCREW-LOCK: manual screw-lock with red band provides a visual warning when the carabiner is unlocked - TWIST-LOCK: automatic locking with double-action gate

FEATURES – Dual-shoulder design for easy organization – Handles large racks – Fleece lining and zippered pocket – Available in two sizes   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.