Climbing Gear

Belay carabiners give smooth and confident belaying with tube and assisted breaking belay devices. They have full section top bars for consistent rope control and reduced rope wear. Their shape resists flipping into sub-optimal orientations when belaying, acting to ensure the carabiner loads along its strongest axis. Product Name Product Code Colour Dimensions Weight MBS (Major Axis) MBS (Minor Axis) MBS (Gate Open) Gate Opening (X) Belay Master A872 Titanium/Lime 70 x 115mm 93g 25kN 10kN 8kN 20mm

Multipurpose light alloy carabiner, large base and wide sizes, with triplex twist-lock gate, conceived for rescue situations and for alpinism in general. Main features: large base and wide clearance; strong section with great resistance that makes it ideal for rope maneuvers with heavy loads; catch-free nose to avoid snagging when clipping and unclipping. Sizes 116 x 79 mm Weight 98 g MBS (main axle) 30 kN MBS (minor axle) 8 kN MBS (open lock) 11 kN Lock opening 26 mm Certification EN 12275:2013-B EN 362:2004-B

D-shaped connector bodies are designed to force the loads closer to the spine of the connector (the strongest orientation), therefore maximising strength. These are probably the most basic of all connectors in terms of shape, but this makes them a perfect choice in applications where strength and simplicity are paramount. Product Name MBS (Major Axis) MBS (Minor Axis) MBS (Gate Open) Dimensions Weight Gate Opening (X) Certification 10mm Equal D Kwiklock 30kN 9kN 10kN 54 x 105mm 187g 15mm EN 362:2004 B/T, EN12275:2013 B 10mm Equal D Kwiklock ANSI 30kN 16kN 10kN 54 x 105mm 200g 14mm EN 362:2004 B/T, ANSI/ASSE Z359.12-2019, CAN/CSA

Belay carabiners give smooth and confident belaying with tube and assisted breaking belay devices. They have full section top bars for consistent rope control and reduced rope wear. Their shape resists flipping into sub-optimal orientations when belaying, acting to ensure the carabiner loads along its strongest axis. Product Name Product Code Colour Dimensions Weight MBS (Major Axis) MBS (Minor Axis) MBS (Gate Open) Gate Opening (X) Belay Master A872 Titanium/Lime 70 x 115mm 93g 25kN 10kN 8kN 20mm

It has a higher strength-to-weight ratio, is less susceptible to UV degradation and has greater abrasion resistance, making Dynatec an ideal material for creating lightweight quickdraws. It also absorbs less water than nylon – an important consideration for winter climbing. The sling's slim profile allows it to be used for narrow threads and to sit better on marginal spike placements.

These thin 8mm Dynatec slings are just as strong as their thicker variants. They can be used for narrow thread protection and to generally reduce weight.

A waist belt with small gear loops for use with the TOOL BUCKET, LONG TOOL BUCKET, GLASS BUCKET, AIR LEASH and ATTRAC’TOOL. Webbing gear loops positioned around the belt allow the tools to be secured where convenient. The belt is reinforced to help spread out the weight of the tools on the waist. Name Tool Belt Weight 190 g Width 50 mm Mini waist measurement 70 mm Tour de taille maxi 130 mm

The Photon Express KS is purpose-built for onsight climbing where every gram and every second counts. The lightweight Photon carabiners are optimized for fast action and smooth clipping. The proprietary SphereLock closure is an upgrade to the traditional keylock system with an even cleaner nose profile. The Photon Express KS also uses our most sophisticated dogbone with variable width webbing that makes them easy to grab while projecting sport routes and the proprietary Karstop Evo carabiner retainer on the rope end. Available in 11 and 18 cm lengths. A premier lightweight quickdraw for high-end sport climbing Equipped with a straight gate Photon carabiner on the bolt end and a bent gate

The passO-Twist has a smooth-running, twist-lock closure for maximum HMS carabiner safety and a stylish SKYLOTEC design. Conforms to alpine sports and industry standards.

Single leg positioning lanyards constructed from 11 mm dynamic rope that can absorb limited shocks that might be produced during positioning activities. Also suitable for use as a portable anchor. Supplied with rubber keepers to help prevent rotation of the connectors. Sewn terminations are protected by a durable plastic sheath. Strength 22 kN. Product name Weight Rope g oz EN 354 EN 795/B DYNAONE 50 cm 80 2.8 • • • • DYNAONE 100 cm 115 4.1 • • • • DYNAONE 150 cm 155 5.5 • • • • DYNAONE 200 cm 185 6.5 • • •   DYNAONE 5 m 430 15.2 • • •   DYNAONE 10 m 820 28.9 • • •

Main characteristics: oval shaped for optimal positioning of pulleys and clamps, shaped for better grip during use; elevated workloads: major axis strength 25 kN and minor axis strength 12 kN; improved section in the most used points, for an increased resistance during the contact with the equipment and rope; catch-free closure that prevents accidental snagging during use.

JACOB / C2150BY Ultra light six step ladder 4 large steps 2 small subsidiary steps plastic reinforcement of steps (hold their shape even under load) red marking of steps upper grab loop special loop for two ladders connection Color black with red Weight 210 g • 7.4 oz Material polyamide, plastic Length 150 cm • 59 in Max. load 500 kg (max. load for grab loop 100 kg)

The Boa is hot forged from 14mm aluminium bar to give it the 30kN major axis rating required for rescue loads. The massive curved basket copes with even the busiest rigging set up and still allows devices to settle comfortably. The impressive size and ergonomics ensure it can be operated by even the largest hands with the chunkiest of gloves. DMM's patented Taperlock closing mechanism increases gate push-in and cross gate strength using a special flared profile on the nose of the carabiner, as well as allowing a snag free connection for your ropes, slings and devices. FEATURES Large HMS shape big enough to fit multiple ropes or connections 14mm loading surface for increased wear

Keylock closure mechanism for optimum handling when clipping and unclipping Available as either screwgate or Triple Lock model H-profile construction ensures best possible use of material and minimal weight Steel insert prevents premature wear from rope friction or bolt hangers Eco colour version: particularly sustainable as non-anodized TECHNICAL SPECIFICATIONS Fmax. major axis: 25 kN Fmax. open : 9 kN Fmax. minor axis : 9 kN Width: 89 mm Length: 110 mm Gate opening: 24 mm Certification : EN 12275, EN 362 Country of origin : Taiwan Material : Aluminium/Steel Closure : Triple Carabiner shape : HMS Bulletproof : Yes Not anodized : Yes

Main features: oval shaped for optimal positioning of pulleys and clamps, shaped for better grip during use; elevated workloads: major axis strength 25 kN and minor axis strength 12 kN; improved section in the most used points, for an increased resistance during the contact with the equipment and rope; ACL system, which allows you to attach it to the belay loop on the harness, stabilizing it and preventing the possibility of cross loading. catch-free closure that prevents accidental snagging during use. Sizes 111 x 64 mm Weight 76 MBS (main axle) 25 kN MBS (minor axle) 12 kN MBS (open lock) 7 kN Lock opening 21 mm Certification EN 12275:2013-B EN