Climbing Gear

The Ultra O's symmetrical rope baskets are ideal for assisted breaking devices, pulleys, swivels and shackles. They also give stable loading characteristics, as attachments can self-centre under load with minimal movement from the carabiner.   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

Their shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. Its keylock nose allows snag-free operation. This is the smallest Locksafe gated carabiner that DMM makes and is 14mm shorter than an Ultra O yet still retains a strong construction. Available in standard and removable captive bar versions, with or without iD.

Their shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. Its keylock nose allows snag-free operation. This is the smallest Locksafe gated carabiner that DMM makes and is 14mm shorter than an Ultra O yet still retains a strong construction. Available in standard and removable captive bar versions, with or without iD.

Condor is a big HMS carabiner that responds to the new trend of safety. The carabiner is equipped with an independent internal wire gate which prevents the carabiner from rotating and guards against unwanted release from a belay loop. The internal gate locks in the right direction and therefore it prevents upward release. This means that the belayer can focus his full attention on climber to watch his moves. Condor brings a new level of safety into belaying. Ergonomic body of new generation is forged for comfortable and secure grip. "Rope Friendly" shape of the carabiner top is tuned for operating the rope reliably in order to avoid its excessive wear. Condor HMS Screw is equipped

Their shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. Its keylock nose allows snag-free operation. This is the smallest Locksafe gated carabiner that DMM makes and is 14mm shorter than an Ultra O yet still retains a strong construction. Available in standard and removable captive bar versions, with or without iD.

Their shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. Its keylock nose allows snag-free operation. This is the smallest Locksafe gated carabiner that DMM makes and is 14mm shorter than an Ultra O yet still retains a strong construction. Available in standard and removable captive bar versions, with or without iD.

The Ultra O's symmetrical rope baskets are ideal for assisted breaking devices, pulleys, swivels and shackles. They also give stable loading characteristics, as attachments can self-centre under load with minimal movement from the carabiner.   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

These revised units feature color co-ordination, are on our new 10mm dyneema and are available in three lengths: 10cm, 15cm and 20cm Five packs of 10cm draws or mixed lengths are also available. Features: Super light ‘I beam’ back Hot forged Tech Wire gate Hooded nose tape width: 10mm weight: 65g longitudinal strength of the carabiner: 23 kN transverse strength: 7 kN strength with open lock: 7 kN

The Ultra O's symmetrical rope baskets are ideal for assisted breaking devices, pulleys, swivels and shackles. They also give stable loading characteristics, as attachments can self-centre under load with minimal movement from the carabiner.   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

FEATURES – Hot-forged construction – I-beam spine transitions into a rounded, large rope-bearing surface – Intuitive and easy-to-use design – Screwgate sleeve – Patented, innovative design isolates belay loop to eliminate cross-loading – Isolates belay loop

FEATURES – New HotForge on top and redesigned HotWire wiregate on the bottom – Colored bottom HotWire carabiner for visual target while climbing – Snag-free keylock top biner for easy bolt clipping – Equipped with an 18 mm Polyester Dogbone with Straitjacket – Available in 12 or 16 cm lengths

Sometimes things just get better – and that’s exactly the case with the NLG Tether Choke™ with two securing arms. Suitable for any tool up to 18kg in weight, the Tether Choke™ can be used on tools with captive handles and even straight sided tools such as sledge hammers, slogging wrenches etc. Once the two securing arms are locked with NLG’s approved Tether Tape™, the most difficult to tether tools can be secured and the workplace becomes a safer place. Twin securing arm guards against movement across both straight-shafted tools and tools with long cylindrical handles Optimised V Ring design for extreme performance Extra high strength webbing delivers ultimate peace of

The carabiner is equipped with a Bi-Matic locking mechanism for faster closing and opening. The lower part of the carabiner is contoured to hold the position in the harness connector. SPECIFICATIONS: Longitudinal axis strength: 25 kN Transverse axis strength: 7 kN Strength with open lock: 7 kN Clearance: 18.6 mm Dimensions: 118x72 mm Weight: 89 g Color: silver Standards: CE EN 12275 BHT

Quickdraw for sport climbing and big walls. Its top carabiner, the STAR GATE, is equipped with the Keylock system to make the unclipping easier. Its rope carabiner, the COSMO WIRE, has an ergonomic shape that facilitates the rope clipping. The RUBBINER system maintains the rope in the right axis. Features: - 16 mm tubular sling for an optimal grip.

Galvanised-steel connector with large-capacity base and triplex twist-lock gate, sturdy and versatile, ideal for harsh environments and for the connection of multiple devices. Main features: wide opening and large internal capacity; robust profile for excellent strength; equipped with catch-free closure for effortless clipping. Sizes 116 x 79 mm Maximum gate opening 25 mm Breaking load major axis 50 kN Breaking load minor axis 15 kN Breaking load with open gate 20 kN Weight 260 g

Two-layer webbing with sewed eyes produced from two items, one inserted into second one outer hollow webbing protects inner red load bearing strap in case of outer webbing damage the user is immediately advised on danger and hazard connected with further use by seeing the red colour of inner strap SLING LANYARD has to be used as a component of a fall arrest system the lanyard is tested according to EN 354 standard for lanyards and according to EN 795B standard for anchor devices color marking according to length also available in black only Code: length:   color marking: strength : W2016 X060 60 cm • 24 in yellow 22 kN W2016 X080 80 cm • 32 in blue

An oversized version of our popular Guide carabiner with a unique shape that gives it an excellent strength-to-weight ratio and a huge gate opening for easy handling with ropes and rigging. An excellent choice for search and rescue applications. Very strong and durable carabiner for heavy use Large gate opening and keylock nose make clipping ropes and webbing easy Screwgate with key lock closure Standard(s): EN 362 – EN 12275 Height (mm) : 117 Width (mm): 75 Gate Opening (mm): 24 Major Axis (kN): 28 Minor Axis (kN): 9 Open Gate (kN): 8 Lock Type: Screw Gate, Key Lock Material: Aluminum alloy Weight: 82 g, 2.9 oz