Climbing Gear

Features Enhanced snag-free, clean nose design Superlight Clean-wire, no-hook gate with easy-opening action 2 mm wire gate I beam back Hot forged High gate-open strength Strength Gate closed  24kN Strength Gate Open  9kN Minor Axis Strength  7kN Gate   Clearance  27mm Weight 38 g

FEATURES – MiniWire carabiners on top and bottom – Dual wiregates eliminate any chance of gate flutter – Equipped with a 10 mm Dynex Dogbone with Straitjacket – Available in 12 cm length   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

Its shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. A keylock nose allows snag-free operation. Also available as a four-colour pack. The colour options help to quickly differentiate between equipment.

Its shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. A keylock nose allows snag-free operation. Also available as a four-colour pack. The colour options help to quickly differentiate between equipment.

This minimises any unplanned movement and so optimises the configuration.

The Wallis is a polymer device that reduces the possibility of cross-loading between webbing and connectors. Quick and simple to install yet invaluable in maintaining safer configurations. Product Name Product Code Colour Weight Wallis GROM-200-P5 Black 21g

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

Its shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. A keylock nose allows snag-free operation. Also available as a four-colour pack. The colour options help to quickly differentiate between equipment.

This minimises any unplanned movement and so optimises the configuration. The Grommet fits perfectly in any of the 16mm attachment holes of the DMM Triple Attachment/Hitch Climber pulley.

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

They feature straight sides to give alternative placement options to our other alloy micro-protection. Used in conjunction with Peenuts they provide comprehensive protection for small cracks in friable rock. Product Name Product Code Colour Strength Weight Range Certification Wallnut 00 A1600A Gold 2kN 5g 4.0 / 9.7mm EN 12276:2013 Wallnut 0 A1610A Blue 2kN 6g 4.6 / 10.8mm EN 12276:2013 Wallnut 0.5 A1658A Red 4kN 9g 5.1 / 11.7mm EN 12276:2013 Wallnut 0.75 A1659A Grey 6kN 10g 5.9 / 12.6mm EN 12276:2013 Wallnut Set 00-0.75 A1600/59A Assorted 2 - 6kN 30g 4.0 -

Its shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. A keylock nose allows snag-free operation. Also available as a four-colour pack. The colour options help to quickly differentiate between equipment.

Versatile HMS locking biner designed for belaying, rappelling and anchor building hot-forged I-beam construction makes the carabiner extremely strong, stiff and light large rope bearing area for better rope glide and reduced wear on the carabiner pear-shaped basket facilitates belaying with the Münter hitch or other belay devices angled snag free  Keylock  nose for smooth clipping and unclipping maneuvers opening and basket area are large enough to easily accommodate the clove hitch screw locking sleeve for great handling and effective locking for better gear management the screw locks are in three different colors available also with twist and triple lock gate, all of

To protect the rope, BEAL have devised a carabiner suited to sport climbing and repeated falls: the BE ONE. The ‘receiving zone’ has been enlarged to allow for the rope to flatten during a fall without introducing lateral friction. The rope runs more freely and absorbs the fall more effectively. The contact surface area has been optimised through the use of a cylindrical profile with a 12 mm diameter. This is less restrictive for the rope and minimises wear caused by repeated falls. KEY FEATURES: Minimised rope wear. Improved rope running. Better softening of the fall. Eases pulling up slack to clip.

5.5mm sewn rope sling made with an aramid core and polyamide sheath. When configured as a prusik it can be used with every rope diameter. The wide, straight groove offers edge-free running of the rope

Symmetrical aluminium oval shaped connector for use with equipment with swivelling side plates such as pulleys, rope clamps, mobile fall arrest devices, etc… STRONG POINTS - Keylock system - Screw cap. - Breaking strength lengthwise: 22 kn - Breaking strength crosswise: 8 kn - Breaking strength open gate: 6 kn - Weight: 74 g. - Authentication: En 362: 2004 / b, en 12275: 2013

Asymmetric screwgate karabiner for lanyards. Its design and shape make it particularly easy to use at the end of a lanyard to clip to a belay. When a belay device is used, this asymmetrical karabiner ensures that the device is always guided towards the karabiner’s apex. Keylock system

Working sling with width 25 mm. Tested according to EN 354 as a connecting device and EB 795 B as a anchor device. Available in four lengths. Each length is color coded by strength stitching. Identification label. Material PA Strength 25 kN Norm EN 354, EN 795.B Weight 85g Code  Lenght  Width  Stitching  CNP060  60 cm  25 mm  Yellow  CNP080  80 cm  25 mm  Blue  CNP120  120 cm  25 mm  Red  CNP150  150 cm  25 mm  Grey

OXY TWL / K0122EE06  - gold OXY TWL / K0122BB06  - black Hot-forged light alloy oval carabiner designed to be used especially with pulleys, ascenders and descenders. twist gate lock rough notches on the locking sleeve for easy manipulation angled snag free  Keylock  nose for smooth clipping and unclipping hot-forged I-beam construction makes the carabiner extremely strong, stiff and light almost oval shape makes the carabiner easy to turn around in device´s attachment points, anchors or slings thanks to the oval shape, pulleys attached are loaded symmetrically large rope bearing area for better rope glide and reduced wear of the carabiner each carabiner is individually

FEATURES – Accommodates a clove hitch – Ideal for use with LINK Anchor system – Hot-Forged for lighter-weight construction – Keylock nose prevents snagging – Screwgate sleeve – Type B “Basic”, locking connector 

FEATURES – Accommodates a clove hitch – Ideal for use with LINK Anchor system – Hot-Forged for lighter-weight construction – Keylock nose prevents snagging – Screwgate sleeve – Type B “Basic”, locking connector 

FEATURES – Nylon webbing is versatile, strong and extremely durable – 18 mm Nylon – Colors specific to lengths

FEATURES – Hot-Forged for lighter-weight construction – Square hinge end holds belay loop securely in place – Slightly curved spine maximizes gate opening – Keylock nose prevents snagging – One-hand operable – Screwgate sleeve – Type H or HMS connector. For dynamic belaying using a Munter Hitch or belay device.

D STEEL CONNECTOR triple lock / K4081ZO Steel connector for work at heights triple lock gate Keylock extra strong large opening and inner space designed especially for industrial use unique production number Color zinc plated Weight 267 g • 9.42 oz Material steel (zinc plated) Strength major axis 50 kN Strength minor axis 13 kN Strength open gate 20 kN Gate opening (d) 25 mm   1019 EN 362