Climbing Gear

Accessory cords from 2 to 8 mm diameter conform to the requirements of the UIAA and EN564 You can buy any length of the product by changing it's amount (1=1m)

At just 37 grams per metre, it takes up little room, but it takes the impact ! On snowfields and steep passages, during mountain walking or skiing, its properties ensure your security. Gamme Mountain line Standard EN 892 Type Twin rope Impact force (1 strand 80 kg factor 0,8) 4.2 KN Impact force (Twin rope EN 892) 8.5 KN Number of falls (1 strand 80 kg factor 0,8) 5 Number of falls (Twin rope EN 892) 12 Extension during the first fall 36% Sheath percentage 40% Weight per metre 36 g Sharp edge strenght   Process - Treatment DRY COVER | GOLDEN DRY  

FEATURES – Bottom loop with sewn half twist for clean girth hitch – Tight weave for stiff feel – Very compact 12 mm wide design – Available in two lengths; assorted colors – For direct aid only

FEATURES – Color-coded to match Camalots for easy identification – Durable workhorse ideal for trad climbing – Hot-Forged for lighter-weight construction – Larger rope-bearing surface for added durability – Nose geometry allows for efficient clipping/unclipping

FEATURES – Bottom loop with sewn half twist for clean girth hitch – Tight weave for stiff feel – Very compact 12 mm wide design – Available in two lengths; assorted colors – For direct aid only

With proven performance since sometime around the Pleistocene, the A-Bod is simple, minimal, perfected and classic. PRODUCT FEATURES Traditional buckle Quick-release leg loops Four gear loops 12 kN-rated haul loop Entire harness constructed from quick-dry nylon webbing MATERIAL Nylon Webbing WEIGHT [M] 395 g (14 oz)   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

The bench is made of durable polyamide, which generally increases the safety of its use. The subsequent steps of the bench are supported by more durable inserts, which are characterized by increased abrasion resistance. The whole thing can be packed into a small size and fastened with Velcro®, and then clipped to the chinstrap with a carabiner.

The new Phlotich Pulley is available fitted with bushings or bearings.  Profiled side plates capture the host line, allowing for a reduction in host line movement Sideplates mate perfectly parallel allowing for a 'clean' connection to the anchoring Karabiners.  The mated sideplates also allow for seamless use of a 'Twin Leg' Tether in SRT climbing with a Rope Wrench.  This reduces clutter and allows proper alignment of the hitch, pulley and tether on the anchoring Karabiner (in a Rope Wrench set up) Lower anchor aperture will allow for full Karabiner rotation Dual Karabiner Alignment- when used with Doubled Rope Climbing, the Phlotich allows the two anchoring Karabiners to be

Compact double pulley for block-and-tackle systems. Main attachment point accommodates two carabiners and the becket features a bottom attachment point for linking components in a block-and-tackle system. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Self-lubricated brass bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheels, stainless steel axle. Ref. Product name Weight Inner sheave diameter Rope diameter Max Working load Max Breaking load Brass bushing Sheave material g oz mm in mm in kN LBF kN LBF EN 12278 2156

LIFT RIGHT / RK804BX0R Hand ascenders for safe and smooth ascent. Extra wide handle and attachment point for two carabiners will fit everyone from bigwall climbers to workers at height or special forces. available in two variants – for the left and right hand stainless steel toothed cam for higher corrosion resistance and for any conditions (frozen or dirty ropes) overmolded grip and ergonomic upper part for a comfortable and powerful grip wide lower hole allows to connect two standard carabiners upper hole for clipping a carabiner around the rope trigger with a short descent feature marked with an unique number   For use with ropes of diameter 8 - 13 mm: according

A compact ventral ascender for ascending ropes Strong points The attachment hole protrudes from the ascender’s body at a 90 degree angle. This ensures the device remains both upright and parallel to the user’s body and allows the rope to easily slide through the device. Positioned low on the harness to maximise progression with every move. All-metal construction of the operating mechanism to increase durability. An ergonomic protruding lever facilitates cam operation. Compatible with all PRO harnesses through the use of a FLAT LINK connector, which connects the harness to the ascender. Name Hold Up Standard EN 567 - 2013 Ø8-13mm | EN 12841 - 2006-B Ø 10-13mm 100kg

SNAKE BRACE / W201* Anchor point for through holes, designed to function as a link between the structure and the fall arrest, work positioning, rope access or rescue systems. intended for through holes whose minimum and maximum diameter corresponds to the type of Snake Brace in relation to the actual thickness of the current structure the opening need not be entirely regular but the minimum diameter must be flat; there must be a minimum space for installation behind the hole intended for a single user the maximum strength can be used only if the structure in which the anchor hole is located can withstand the load in all directions the minimum strength of the construction should

The Black Diamond Solution Harness provides unequaled comfort for long days spent working your project. Fusion Comfort Technology introduces three separate strands of low-profile webbing in both the fixed leg loops and waist to create superior load distribution while reducing pressure on sensitive points. Designed to fit the contours of your body, the Solution maximizes freedom of movement and comfort, without sacrificing performance. PRODUCT FEATURES Lightweight waistbelt with Fusion Comfort Technology™ Contoured fit for superior comfort and range of motion Four pressure-molded gear loops Adjustable, releasable elastic risers Primary fabric is bluesign approved Regular

The Black Diamond Solution Harness provides unequaled comfort for long days spent working your project. Fusion Comfort Technology introduces three separate strands of low-profile webbing in both the fixed leg loops and waist to create superior load distribution while reducing pressure on sensitive points. Designed to fit the contours of your body, the Solution maximizes freedom of movement and comfort, without sacrificing performance. PRODUCT FEATURES Lightweight waistbelt with Fusion Comfort Technology™ Contoured fit for superior comfort and range of motion Four pressure-molded gear loops Adjustable, releasable elastic risers Primary fabric is bluesign approved Regular

Modern and comfortable sport climbing harness with adjustable leg loops for a perfect fit. Center Fit Construction: Moveable waist padding for personalized fit and positioning Four symmetrical gear loops and two attachment options for ice screw clips Tie-in loop with an indicator that reveals red threads in the event of increased wear, signaling that it is time to replace the harness Tie-in point with abrasion protector made from Dyneema® Small pouch on harness to accommodate an RFID tag Made of bluesign®-certified materials 15 mm Slide Block buckle on waistbelt for secure and comfortable fit Certification : EN 12277 Typ C Attachment options for ice screw clips

SKYLOTEC rope pulleys are fitted with ball bearings and are made of aluminium. All pulleys comply with EN 12278 and UIAA 127 and are manufactured in the EEC. High quality is also reflected in their design. The mould design ensures minimal material use and lightweight design of the rope pulley.

The Astro retains many of the features that run through the Helium concept, creating a ‘biner that’s exceptionally strong, compact and lightweight. Importantly, the Astro retains a practical size and an overriding ability to be used in all circumstances, which is an essential part of karabiner design that is sometimes forgotten in the race to shed weight. Strength Gate closed 23grams Strength Gate Open 7KN Minor Axis Strength 7KN Gate Clearance 24mm Weight 29g