Climbing Gear

Thanks to its size it is suitable for building the belaying points and comfortable belaying with the munter hitch knot or with a belay device. To open the super safe Triple safety gate, you have to slide and then rotate the gate. There is absolutely no way it can open by itself. Very spacious upper arc allows connection with loads of gear Round profile of the upper arc makes the handling very comfortable Huge gate opening Super safe Triple gate Weight 97 g Major axis strength 28 kN Minor axis strength 8 kN Open gate strength 8 kN Gate opening 26 mm External dimensions 122 x 88 mm

Condor is a big HMS carabiner that responds to the new trend of safety. The carabiner is equipped with an independent internal wire gate which prevents the carabiner from rotating and guards against unwanted release from a belay loop. The internal gate locks in the right direction and therefore it prevents upward release. This means that the belayer can focus his full attention on climber to watch his moves. Condor brings a new level of safety into belaying. Ergonomic body of new generation is forged for comfortable and secure grip. "Rope Friendly" shape of the carabiner top is tuned for operating the rope reliably in order to avoid its excessive wear. Condor HMS Screw is equipped

A brush specifically created to clean ropes. Adapts easily to different diameters. Twist the brush onto the rope then run the rope through the brush while holding it firmly under water.

Lanyard with 2 attachment points. The MOBILE-LANYARD is certified to work with the MONITOR mobile fall arrest device, enabling it to be positioned away from the operator. Allows the operator to create a short or longer link dependant on their needs: Short link for work on a gentle slope or to limit the length of a fall (20 cm). Longer link to distance the rope from the operator and to gain freedom of movement (40 cm). STRONG POINTS Includes two PINCH’s to ensure the correct orientation of the connector at its extremity. Marked with a unique serial number. Strength: 2200 daN (kg)

Unidirectional screw gate locking carabiner designed for use with belay plates where the rope passes through the carabiner. The internal snap gate that clips to the harness belay loop keeps the carabiner in proper orientation reducing the chances of cross loading the belay system. Weight: 81 grams Strength: 24kN CE EN 12275 B Certified  

Unidirectional screw gate locking carabiner designed for use with belay plates where the rope passes through the carabiner. The internal snap gate that clips to the harness belay loop keeps the carabiner in proper orientation reducing the chances of cross loading the belay system. Weight: 81 grams Strength: 24kN CE EN 12275 B Certified  

Unidirectional screw gate locking carabiner designed for use with belay plates where the rope passes through the carabiner. The internal snap gate that clips to the harness belay loop keeps the carabiner in proper orientation reducing the chances of cross loading the belay system. Weight: 81 grams Strength: 24kN CE EN 12275 B Certified  

Wooden balls for pull-ups, which will allow the strengthening of pinch grip and forearm muscles. Diameter and weight : ∅ 80 [mm], about 200g ∅ 100 [mm], about 350g ∅ 120 [mm], about 650g Price for 1 ball !

Description Allow a seat to be connected to a gated attachment point on a harness Specifications Material(s): stainless steel Weight: 20 g

These revised units feature color co-ordination, are on our new 10mm dyneema and are available in three lengths: 10cm, 15cm and 20cm Five packs of 10cm draws or mixed lengths are also available. Features: Super light ‘I beam’ back Hot forged Tech Wire gate Hooded nose tape width: 10mm weight: 65g longitudinal strength of the carabiner: 23 kN transverse strength: 7 kN strength with open lock: 7 kN

FEATURES – New HotForge on top and redesigned HotWire wiregate on the bottom – Colored bottom HotWire carabiner for visual target while climbing – Snag-free keylock top biner for easy bolt clipping – Equipped with an 18 mm Polyester Dogbone with Straitjacket – Available in 12 or 16 cm lengths

screw lock can be used for securing of persons 90° twist allows smoother orientation of any part Color: zinc-plated Weight: 106 g • 3.74 oz Material: zinc-plated steel Diameter: 8 mm Strength major axis: 32 kN Strength minor axis: 10 kN Gate opening (d): 17.5 mm

STEEL LANYARD "I" / RK850X Steel connecting and anchoring device   both ends finished with a fixed eye combination of   very   good   strength and durability ideal for   pruning   trees or   welding   at height available in three lengths     Code length strength eyes color RK850X 100 100 cm • 39 in 15 kN yellow RK850X 130 130 cm • 51 in 15 kN blue RK850X 180 180 cm • 71 in 15 kN red   Material zinc plated steel covered by PVC Strength 15 kN Length 100, 130 and 180 cm • 39, 51 and 71 in

FEATURES – New HotForge on top and redesigned HotWire wiregate on the bottom – Colored bottom HotWire carabiner for visual target while climbing – Snag-free keylock top biner for easy bolt clipping – Equipped with an 18 mm Polyester Dogbone with Straitjacket – Available in 12 or 16 cm lengths

– Modern, tapered shape with pliable wire rim is made from repurposed materials – Fleece-lined interior with cinching cord-lock closure – Brush holder – Webbing belt with quick-release buckle – Size: S/M and M/L

NLG’s Tether Choke™ with single securing arm is the solution for your big problem tools – those tools that are big in size and big in weight (maximum load of 18kg). The single securing arm combined with the simplicity of the Tether Choke™ only extends its area of uses. Specially developed for users of power tools with triggers, the securing arm allows the Choke™ to be locked in position with the approved Tether Tape and keeps the tool’s trigger restriction-free. The versatility of the Tether Choke™ means it is approved to use as an anchor as well. Single securing arm guards against movement across both straight-shafted tools and power tools Optimised V Ring design for

FEATURES – Two clip-ins for corner placements and weight reduction

Inspired and built for the Black Diamond athlete team, this chalk bag features a modern, tapered shape, secure closure system, and durable fabric. The bag also includes a webbing belt with a quick-release buckle for easy on and off. PRODUCT FEATURES Built for the Black Diamond athlete team Modern, tapered shape with pliable wire rim is made from repurposed materials Fleece-lined interior with cinching cord-lock closure Brush holder Webbing belt with quick-release buckle