Climbing Gear

Main features: – equipped with an innovative loop for the connection to the harness (registered design), with six wide intermediate loops and a sling at the end; – the special construction guarantees a constant 24kN-rated strength: from end to end, for each single intermediate loop or connecting two or more intermediate loops; – this single-loop-based construction reduces the chance of error and the danger of it moving out of the anchor, typical of traditional daisy chains.

Breathable, minimalistic vari-width Dynex monofilament construction Single Dynex tie-in point Fixed leg loops for weight savings means you can’t put harness on while wearing skis Two gear loops Four Ice Clipper slots with ice screw slot in each leg loop to reduce clanking Color coded waist and leg loops (inside/outside) to make putting on harness easy/intuitive Unisex Available in S, M, L, XL S-XL 115g (M)   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

Breathable, minimalistic vari-width Dynex monofilament construction Single Dynex tie-in point Fixed leg loops for weight savings means you can’t put harness on while wearing skis Two gear loops Four Ice Clipper slots with ice screw slot in each leg loop to reduce clanking Color coded waist and leg loops (inside/outside) to make putting on harness easy/intuitive Unisex Available in S, M, L, XL S-XL 115g (M)   Keep in mind: Products from the Spring Clearance promotion were manufactured between 2019 and 2022.

Daisy Chain Profi is an anchoring and connection device, which consists of 9 weight bearing loops. This unique sling can be used in a variety of ways while maintaining safety. Each individual loop is strong enough to be connected in any direction needed. Identification label SKU: CDP135 Length: 135 cm Number of loops: 9 Length: 8x15 cm, 1x30 cm Material: Nylon/polyamid and polyester Strength: 22 kN Norm: EN 354, EN 795-B, EN 16 415 Weight: 224g

Captive eye for permanent connection Sometimes it is essential for a connector to stay in the correct orientation or to be permanently attached to a system. The DMM captive eye connectors, with their textile friendly attachment holes, can be stitched into a rope or webbing loop, or swaged directly onto cable. They provide predicable direction of load and total security as the connector cannot be removed or misaligned. Keylock clean nose for snag free connection DMM's patented 'Taperlock' closing mechanism increases gate push-in and cross gate strength using a special flared profile on the nose of the carabiner, as well as allowing a snag free connection for your ropes, slings and

STEEL ANCHOR "I" / RK851XX Steel anchoring device   both ends are finished with a fixed eye combination of   very   good   strength and durability ideal for   pruning   trees or   welding   at height available in two lengths     Code length strength eyes color RK851XX 03 300 cm • 118 in 15 kN yellow RK851XX 05 500 cm • 197 in 15 kN green   Material zinc plated steel covered by PVC Strength 15 kN Length 300 and 500 cm • 118 and 197 in 5 m – 1150 g / 40.6 uncji CE 1019 • EN 795B

VULCAN is a high-strength steel carabiner designed for use in difficult environments. The large-capacity asymmetrical shape is ideal for setting multiple anchors. The VULCAN carabiner is available in two locking systems: automatic TRIACT-LOCK system or manual SCREW-LOCK system. VULCAN TRIACT-LOCK is available in European or international versions. VULCAN can be connected to the CAPTIV bar to favor positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device. Description High-strength steel carabiner for use in harsh environments, particularly suitable for setting up multiple anchors Easier handling: - fluid interior

TRAFIC 216 is a mobile plate double pulley designed for hauling systems and heavy loads (brass bearings), it accepts ropes up to 16mm. Equiped with a bottom becket to create complex systems. 

The specially designed DEFUSER energy absorbers type S, L, and RESCUE may be used exclusively with the guided-type fall arrester FUSE: They are light, compact, and the maximum arrest shock is 30 % below the standard. Must be used exclusively in connection with the guided-type fall arrester FUSE TECHNICAL SPECIFICATIONS Minimum breaking strength: 15 kN Certification : + Fuse = EN 12841-A, + Fuse = 353-2, + Fuse = ANSI Z359.15 Country of origin : Germany

The NLG Extended Bungee Lanyard reaches to 2m allowing heavier tools to be connected to anchor points, both on and off the user. It is ideally suited for attaching to connection points within NLG’s range of bags for working at height including the ground-breaking Ascent Bucket™. Equipped with the 360° Quick Clip™ connectors at each end, the NLG Extended Bungee Tool Lanyard remains tangle-free even when used with tools that must rotate freely such as screwdrivers, spanners etc. Quick Clips™ are ergonomically designed for quick connection and disconnection with a built in trigger to facilitate use when wearing gloves. Reduced bungee tension allows for precision control and