Climbing Gear

Unlike adhesive sports tapes, our medical grade, self-adherent, water resistant and breathable magic hand tape sticks to itself rather than the skin with gentle pressure application. Perspiration and water will not loosen the cohesive bond and the porosity permits air circulation. You can snip the tape away easily and cleanly without leaving any sticky residue and uncomfortable pulling of skin or hair.

Unlike adhesive sports tapes, our medical grade, self-adherent, water resistant and breathable magic hand tape sticks to itself rather than the skin with gentle pressure application. Perspiration and water will not loosen the cohesive bond and the porosity permits air circulation. You can snip the tape away easily and cleanly without leaving any sticky residue and uncomfortable pulling of skin or hair.

Unlike adhesive sports tapes, our medical grade, self-adherent, water resistant and breathable magic hand tape sticks to itself rather than the skin with gentle pressure application. Perspiration and water will not loosen the cohesive bond and the porosity permits air circulation. You can snip the tape away easily and cleanly without leaving any sticky residue and uncomfortable pulling of skin or hair.

DYNEEMA SLING 8 mm / C2004X Sling for an anchor point   light, thin and still very strong perfect for threads ideal for all aplications were weight and strength come first 60 cm in yellow/white (C2004X060) 120 cm in red/white (C2004X120) Color yellow/white (60 cm) and red/white (120 cm) Material dyneema Strength 22 kN Width 8 mm Length 60 and 120 cm (24 and 48 in)

Main characteristics: oval shaped for optimal positioning of pulleys and clamps, shaped for better grip during use; elevated workloads: major axis strength 25 kN and minor axis strength 12 kN; improved section in the most used points, for an increased resistance during the contact with the equipment and rope; catch-free closure that prevents accidental snagging during use.

Wooden balls for pull-ups, which will allow the strengthening of pinch grip and forearm muscles. Diameter and weight : ∅ 80 [mm], about 200g ∅ 100 [mm], about 350g ∅ 120 [mm], about 650g Price for 1 ball !

Wooden balls for pull-ups, which will allow the strengthening of pinch grip and forearm muscles. Diameter and weight : ∅ 80 [mm], about 200g ∅ 100 [mm], about 350g ∅ 120 [mm], about 650g Price for 1 ball !

Wooden hemispheres are the perfect complement slats on campus. They allow for diversity training and introduce a variety of used grip. They can also provide independent grips on the climbing wall. Diameter and weight: ∅ 100[mm], about 300g ∅ 120 [mm], about 400g ∅ 150 [mm], about 600g Price for 1 piece !

Keylock closure mechanism for optimum handling when clipping and unclipping H-profile construction ensures best possible use of material and minimal weight Steel insert prevents premature wear from rope friction or bolt hangers Ergonomic gate design for easier clipping TECHNICAL SPECIFICATIONS Fmax. major axis: 24 kN Fmax. open : 8 kN Fmax. minor axis : 10 kN Width: 58 mm Length: 100 mm Gate opening: 25 mm Certification : EN 12275 Country of origin : Taiwan Material : Alu / Steel Closure : Bent Carabiner shape : Offset D Bulletproof : Yes

Made of bluesign®-certified materials Drawcord closure for easy tightening 2 brush holders TECHNICAL SPECIFICATIONS Diameter: 10 mm Depth: 12 cm Country of origin: Vietnam

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

Description Lighter and more flexible than nylon slings Very abrasion resistant Width: 12 mm Available in 2 color-coded sizes for easy identification: 60 and 120 cm Specifications Material(s): nylon and Dyneema webbing, polyester stitching Breaking strength: 22 kN Certification(s): CE EN 795 B References References C07 60 C07 120 Length without connector 60 cm 120 cm Color(s) yellow red Weight 20 g 40 g

The SPIRIT carabiner is the benchmark for sport climbing and working routes. Bent and straight gate designs are optimized for different uses. The Keylock system prevents the carabiner from snagging when clipping and unclipping. Its standard size doesn’t compromise on weight; in fact, its excellent weight-to-performance ratio means you can take it with you on different types of terrain like single pitch, multi-pitch, alpine rock, or ice. Available in two versions: straight gate or bent gate. The bent gate version is available in six colors. Description Easy to clip and unclip: - Keylock system is designed to avoid snagging on a gear loop, bolt hanger, or rope - The straight gate

Description Ultra-lightweight bag for transport of chalk bags Seams with thermo-bonded bands ensure airtight storage of leftover chalk Roll-top and buckle closure system keeps chalk from spilling out Specifications Weight: 40 g Material(s): nylon

Most pitons rely on compression of the metal and leverage from directional pull for their holding power. The U shape of the shaft on the Corner piton adds an additional holding force by creating spring tension when the piton is driven into a crack proportionately smaller than its width. Product name Weight Total length Blade length Thickness Material g oz mm in mm in mm in EN 569 CORNER N.1 56 2.0 105 4,13 70 2,76 12 0,47 Hardened Steel Progression CORNER N.2 65 2.3 110 4,33 75 2,95 16 0,63 Hardened Steel Progression CORNER N.3 95 3.4 145 5,71 110 4,33 18 0,71 Hardened Steel

Most pitons rely on compression of the metal and leverage from directional pull for their holding power. The U shape of the shaft on the Corner piton adds an additional holding force by creating spring tension when the piton is driven into a crack proportionately smaller than its width. Product name Weight Total length Blade length Thickness Material g oz mm in mm in mm in EN 569 CORNER N.1 56 2.0 105 4,13 70 2,76 12 0,47 Hardened Steel Progression CORNER N.2 65 2.3 110 4,33 75 2,95 16 0,63 Hardened Steel Progression CORNER N.3 95 3.4 145 5,71 110 4,33 18 0,71 Hardened Steel

Most pitons rely on compression of the metal and leverage from directional pull for their holding power. The U shape of the shaft on the Corner piton adds an additional holding force by creating spring tension when the piton is driven into a crack proportionately smaller than its width. Product name Weight Total length Blade length Thickness Material g oz mm in mm in mm in EN 569 CORNER N.1 56 2.0 105 4,13 70 2,76 12 0,47 Hardened Steel Progression CORNER N.2 65 2.3 110 4,33 75 2,95 16 0,63 Hardened Steel Progression CORNER N.3 95 3.4 145 5,71 110 4,33 18 0,71 Hardened Steel

Most pitons rely on compression of the metal and leverage from directional pull for their holding power. The U shape of the shaft on the Corner piton adds an additional holding force by creating spring tension when the piton is driven into a crack proportionately smaller than its width. Product name Weight Total length Blade length Thickness Material g oz mm in mm in mm in EN 569 CORNER N.1 56 2.0 105 4,13 70 2,76 12 0,47 Hardened Steel Progression CORNER N.2 65 2.3 110 4,33 75 2,95 16 0,63 Hardened Steel Progression CORNER N.3 95 3.4 145 5,71 110 4,33 18 0,71 Hardened Steel

A clean nose stops your keys catching, I-Beam construction brings weight down to a miniscule 8 grams, and colour anodising means the XSRE stands out from the crowd. It even rates to 4kN, more than strong enough for any non-PPE function you can think of.

A clean nose stops your keys catching, I-Beam construction brings weight down to a miniscule 8 grams, and colour anodising means the XSRE stands out from the crowd. It even rates to 4kN, more than strong enough for any non-PPE function you can think of.

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

A clean nose stops your keys catching, I-Beam construction brings weight down to a miniscule 8 grams, and colour anodising means the XSRE stands out from the crowd. It even rates to 4kN, more than strong enough for any non-PPE function you can think of.