Vacuum Cleaner Accessories

Access Plate (does NOT come with screws) holds the brush in place under the foot of the vacuum. This is removable to give access to the brush and belt. Fits the Powerlifter 1793 Series. | Access Plate more→for Select Upright Vacuums | 1610217

Access Plate in GREEN is located under the foot of the vacuum and holds the brush in place. To access the brush and belt - this access plate needs to be removed. To remove from foot of machine, unplug more→the vacuum, turn over and unscrew (6) six Philips head screws to remove this cover. This Access Plate fits several upright vacuum cleaners including: CleanView Swivel Non-Rewind - Series 2252, 2316 PowerLifter Swivel Rewind - Series 2259 PowerEase Swivel Rewind - Series 2253 CleanView Swivel Rewind - Series 2254, 2256, 2258 PowerClean Swivel Rewind - Series 2256K PowerLifter Swivel Non-Rewind - Series 2260 | Access Plate - GREEN - for Select Upright Vacuums | 1616186

Access plate holds the brush and belt in place underneath the foot of your vacuum. Simply unscrew the screws and pull off to get access to the brush roll and belt. Purple Access plate fits the Powerli more→fter Pet Bagged Vacuum Cleaner, Model 2019. | Access Plate Purple for Select Vacuums | 1611903

Access Plate for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this Access Plate fits your model vacuum cleaner. The Access Plate on on the bottom of the foot. It holds th more→e brush in place. To remove, place vacuum upside down with brush roll facing upwards. Remove 5 screws with a Phillips-head screwdriver. | Access Plate for Select Vacuums | 1628298

Access Plate, also referred to as the Sole Plate is for the BISSELL ICONpet Robotic Vacuum. It is under the vacuum and holds the brush in place. To remove and inspect the access plate/sole plate, plea more→se follow these instructions: Turn power OFF, remove the robot from the dock and put it upside down on a soft surface. Use a Phillips-head screwdriver to remove the 3 screws on the access plate. Rotate the access plate and lift it out. Look for damage on the access plate rollers and flexible wiper. Make sure they're all rotating freely. Replace if necessary. Pull up on the plastic end cap to remove the brush. Clean it and make sure the plastic end rotates freely. Check right side drive gear to

Access plate holds the brush and belt in place underneath the foot of your vacuum. Simply unscrew the screws and pull off to get access to the brush roll and belt. Lime Access plate fits the CleanView more→Pet Bagged Vacuum Cleaner, Model 20191. | Access Plate Lime for Select Upright Vacuums | 1611904

Access Plate in Blue fits on the bottom of the foot to hold the brush roll in place. Fits select PowerForce Upright Vacuums. | Access Plate - Blue Powerforce Vacuums | 1608236

Access Plate with Screws goes under the foot to hold the brush and belt in. Click on "View Products" to ensure this is the correct part for your vacuum. | Access Plate with Screws | 1636002

Access plate is on the bottom of the foot and holds the brush in place on the vacuum. Remove this to access the brush and belt. | Access Plate with Screws for Powerswift Vacuum | 1610290

Access Plate with Screws for Select BISSELL Stick Vacuums, including ICONPET series Stick Vacs. The access plate goes on the bottom of the foot and holds the brush in place on the foot. | Access Plate more→with Screws for Select Stick Vacuums | 1627311

Access Plate holds the brush in the machine on the bottom of the foot. Fits Select BISSELL Upright Vacuum Cleaners. Click on "View Products" to ensure this fits your machine. | Access Plate with Screw more→s for Select Upright Vacuums | 1635636

Access Plate holds the brush in the machine screwed on the bottom of the vacuum foot. Fits Select BISSELL Upright Vacuum Cleaners. Click on "View Products" to ensure this Access Plate fits your vacuum more→. | Access Plate with Screws for Select Upright Vacuums | 1635996

NOTE: COLOR MAY VARY Access plate with Screws fits on the bottom of the foot of the vacuum and holds the brush roll and belt in place. | Access Plate with Screws for Select Upright Vacuums | 1639537

Access Plate holds the brush in place on the bottom of the foot of the vacuum. You can unscrew the screws holding it in place to access the brush and belt. Fits Select BISSELL Vacuum Cleaners includin more→g MultiClean Allergen Vacuums | Access Plate with Screws for Select Vacuums | 1624043

Access Plate holds the brush in place on the bottom of the foot of the vacuum. You can unscrew the screws holding it in place to access the brush and belt. Fits Select BISSELL Vacuum Cleaners includin more→g MultiClean Allergen Pet Vacuums. | Access Plate with Screws for Select Vacuums | 1624048

Access Plate with Screws goes on the bottom of the vacuum and holds the brush in place on the bottom of the foot. Fits select BISSELL Upright Vacuum Cleaners, including MultiClean Allergen Series 3125 more→, 3126. | Access Plate with Screws for Select Vacuums | 1626211

Access Plate with Screws for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this access plate fits your vacuum. The Access Plate is on the bottom of the vacuum that holds t more→he brush roll in place. To remove, unplug the vacuum, turn over and unscrew the six (6) Phillips-head screws to remove the bottom cover. | Access Plate with Screws for Select Vacuums | 1631294

Access Plate with Screws goes under the foot and holds the brush in place on the bottom of the vacuum. Click on "View Products" to ensure this part goes with your vacuum. | Access Plate with Screws fo more→r Select Vacuums | 1633661

Access Plate Assembly with Screws. 15" screws on the bottom of the foot to hold the brush roll into place. Fits CleanView Deluxe MultiSurface Upright Vacuum - Model 2412. | Access Plate w/ Screw 15" - more→Black | 1601497

Access Plate for bottom of the foot holds the brush in place. Includes a lint strip to help attract pet hair. Fits CleanView Complete Pet Upright Vacuum with OnePass Technology Upright Vacuum - Model more→8531. | Access Plate w/ Screw & Lint Strip 15" CleanView | 1601499

Access Plate comes with screws and holds the brush in place under the foot of the vacuum. Fits on Cleanview Vacuums - Series 1330, 1331, 1334, 1332, 1320, 1333, 1322, 1329, 1452 | Access Plate w/ Scre more→ws 13. 5" for Cleanview Vacuums | 1604548

Access plate fits under the foot of the vacuum and holds the brush in place. Held in with screws, it can easily be unscrewed and taken off for easy access to the brush roll and belt. The Access plate more→comes with Screws, Squeegee, and Edge Brush. Fits select Upright Vacuums including models 1824, 1819, 1820, 1838. | Access Plate w/ screws for Select Upright Vacuums | 1611233