Filter sets for vacuum cleaners

Dyson Zone™ noise cancelling headphones electrostatic and carbon filters. Your MyDyson™️ App will let you know when they need replacing.

2pcs Side Brushes + 2pcs Filters + 1pc Roller Brush + 2pcs Mop Cloth for ILIFE V7s Plus Robot Vacuum Cleaner

Filters for OSOTEK H200 Wet Dry Vacuum Cleaner, 2Pcs

3Pcs HEPA Filters for Proscenic S3 Cordless Vacuum Cleaner

1. These 2 replacement fabric filters are suitable for Proscenic 12 cordless vacuum cleaners. Please make sure to check your vacuum model before purchasing.2. HEPA filters capture 99.99% of particles more→ejected while cleaning and expel non-aller-genic fresh air. Please clean and replace the filter periodically for optimal performance, Pre Filter Cleaning Tool is highly recommended to help prevent loss of suction.3. For best performance, the HEPA filter can be washed under running water and must be completely dry before reinstalling. Please replace the pre-filter every 3-4 months, and the HEPA filter every 6 months for continuous cleaning performance.

Compatible: Xiaomi MI Home STYJ02YM / Xiaomi VIOMI V2 / V2 Pro  / V3   Robot Vacuum Cleaner

Compatible: Xiaomi MI Home STYJ02YM / Xiaomi VIOMI V2/V2 Pro/V3  Robot Vacuum Cleaner

Compatible: Xiaomi MI Home STYJ02YM / Xiaomi VIOMI V2 / V2 Pro / V3  Robot Vacuum Cleaner

Compatible: Xiaomi MI Home STYJ02YM / Xiaomi VIOMI V2 Pro Robot Vacuum Cleaner

Compatible: Xiaomi MI Home STYJ02YM / Xiaomi VIOMI V2 Pro Robot Vacuum Cleaner

Compatible: Xiaomi MIJIA 1C Robot Vacuum Cleaner

Dirt Tank Assembly in Blue - includes filters, but no separator. Fits the BISSELL CleanView Lift-Off Vacuum, 2043U | Dirt Tank Assembly with Filters CleanView Lift-Off | 1616261

Pre-Motor Filter (3 pieces) for the Pet Hair Eraser Lift-Off Upright Vacuum Cleaner - Series 2087. Replace this filter every 3 - 6 months! To Clean/Replace the Pre-Motor Filters: Press the dirt contai more→ner Release Button and pull away from vacuum. Twist tank cover to the unlock position then pull up on the handle. Pull down on the Pre-Motor filter to remove. There are three pieces to the Pre-Motor filter. All are washable. Be sure to dry all filter layers separately and they are fully dry before reassembling and returning to the vacuum. | Pre-Motor Filters - Pet Hair Eraser Lift-Off | 1612637

How to clean the Foam & Felt Pre-Motor Filters for the Pet Hair Eraser Upright Vacuum - Model 1650 Series. Press the Tank Release Button and pull the tank away from the vacuum. Pull tab out on the fro more→nt of the dirt container and pull handle up to open filter location. Remove pre-motor filters from the top of the dirt container lid by pulling them out. Both Pre-Motor Felt/Mesh and Foam Filters are washable. Clean with a mild detergent, rinse and squeeze all excess water. Allow filters to dry completely before reinserting. Place dry pre-motor filters back in the top of the dirt container placing the thick foam filter last. Filters should be replaced with new filters every 6 to 8 months

High-Efficiency Filter Captures 99% Of Allergen, Pollen, And Particles As Small As 10 Microns/ Compatible With Roomba 800 And 900 Series Robots/ 3 Filters

Made Of Multi-Ply Material/ Electrostatically Charged To Retain Dust Particles/ Retains 99.95% Of Particles/ Filters Last As Long As 5 Dustbags/ Compatible With All Canister And S7/ 3 Pack