Vacuum Cleaner Accessories

PowerFoot for the Pet Hair Eraser Cordless Hand Vacuum, Series 1782. | Power Foot Pet Hair Eraser Cordless Hand Vacuum | 1608655

Separator Assembly fits inside the Dirt Tank. To clean the Separator Assembly, follow these instructions: Hold the dirt tank over a trash container. Press the bottom release button to empty. Twist Sep more→arator Assembly counter-clockwise and pull down to remove. Tap Separator Assembly against inside of trash container and rinse under warm water, if necessary. Let dry completely before reinstalling. | Separator Assembly | 1639789

Dual Separator Assembly for Cleanview Rewind Models 2970, 3247, 3583, 7636 and 8531. Fits inside the dirt tank. | Separator Assembly for Cleanview Rewinds | 1601515

Separator Assembly sits inside the Dirt Tank for the Hard Floor Expert Canister Vacuum - Series 1547. | Separator Assembly for Hard Floor Expert Canister | 1607937

Separator Assembly for the Powergroom Multi-Cyclonic Canister Vacuum - Series 1654 in Lime Green. | Separator Assembly for Powergroom Multi-Cyclonic | 1607938

Separator Assembly for PowerLifter Rewind 1792 Series Upright Vacuum. | Separator Assembly for Powerlifter Rewind | 1610207

Separator Assembly in Purple for the PowerLifter Upright Vacuum - Series 1793. | Separator Assembly - Purple for PowerLifter Vacuum | 1610206

Separator Assembly for the BISSELL Pet Hair Eraser Canister, Series 2230, and SmartClean Canister Vacuum, Series 2268. To clean the Separator follow these instructions: Turn the Separator system count more→er-clockwise to release and remove from the tank. The Separator system can be rinsed to clean. Let dry for 24 hours before replacing Replace Separator system and turn clockwise to lock in place. | Separator Assembly for Select Canister Vacuums | 1618601

Separator Assembly fits inside Dirt Tank. In Purple. | Separator Assembly - Purple - for Select Canister Vacuums | 1622436

Separator Assembly for BISSELL Pet Hair Eraser Corded Slim Vacuum Cleaner, Series 2897, and CleanView Pet Slim Corded Vacuum, Series 2831, and 3070. | Separator Assembly for Select Corded Slim Vacuums | 1623108

This Separator Assembly DOES NOT come with the mesh cup. It is just the filter ONLY! If you need the mesh screen you can find it here Filter/Separator Assembly for Select Hand Vacs including Pet Hair more→Eraser Hand Vac, Series 2390 and AutoMate Hand Vac, Series 2284W. To clean this Filter/Separator Assembly: Turn power OFF and remove the dirt cup. Grasp filter tabs and lift up to remove the washable filter cup from the dirt cup. Grip the filter cup and turn counterclockwise and lift down to remove filter from filter cup. Tap firmly against the inside of a waste container, removing any visible dirt. Replace filter back into the filter cup then turn clockwise to lock into place. Attach filter cup

Separator Assembly fits inside the Dirt Tank of Select BISSELL Stick Vacuums, including CleanView Pet Slim, and PowerGlide Pet Slim, Series 2903, 2921, 3080. To empty the dirt tank, you must remove th more→e separator from the dirt tank. Here's how: Turn OFF your machine. Remove the Dirt Tank from the Hand Vacuum by pressing the Tank Release Button on the front of the tank. Grab the middle grip of the filter and pull up. This will activate a wiping feature to remove debris from the mesh filter screen. Twisting the grip will remove the filter only. Fully remove the separator from the tank and tap the mesh screen on the side of the trash bin. Dump dirt from the tank into the trash bin. Slide the

Separator Assembly is BLACK AND SILVER fits inside the Dirt Tank of Select BISSELL Stick Vacuums including PowerEdge Cordless Stick Vacs, Series 2900. To empty the dirt tank, you must remove the separ more→ator from the dirt tank. Here's how: Turn OFF your machine. Remove the Dirt Tank from the Hand Vacuum by pressing the Tank Release Button on the front of the tank. Grab the middle grip of the filter and pull up. This will activate a wiping feature to remove debris from the mesh filter screen. Twisting the grip will remove the filter only. Fully remove the separator from the tank and tap the mesh screen on the side of the trash bin. Dump dirt from the tank into the trash bin. Slide the separator

Separator Assembly for Select BISSELL Stick Vacuums, including ICONPET TURBO, series 3177, 3178. | Separator Assembly for Select Stick Vacuums | 1627571

Separator Assembly in GREY for Select Upright Vacuum Cleaners, including PowerLifter Non-Rewind Vacuums, Series 2260. This is the piece that fits inside the dirt tank. To clean the Separator Assembly more→follow these directions: Once the dirt tank is empty, reach up into the dirt tank and grab the separator and twist to the left and pull down to remove from the tank Clean assembly with warm water and mild detergent. Let the assembly completely dry before replacing in tank To replace, fit into place and twist to the right until it locks into place | Separator Assembly - GREY - for Select Upright Vacuums | 1616191

Separator Assembly in BLACK for select BISSELL Upright Vacuum Cleaners. Click on "View Products" to ensure this separator fits your vacuum. | Separator Assembly - BLACK - for Select Upright Vacuums | 1635626

Separator Assembly for Select BISSELL Upright Vacuums. Fits inside your dirt tank. Click on "View Products" to ensure this Separator Assembly fits with your vacuum cleaner. | Separator Assembly for Se more→lect Upright Vacuums | 1635991

Separator Assembly fits inside the dirt tank. Remove and clean often to keep optimal suction on your vacuum cleaner. | Separator Assembly for Select Upright Vacuums | 1639532

Separator Assembly for Select BISSELL Vacuum Cleaners, including BISSELL SurfaceSense Pet Multi-Surface Vacuum, series 2817. | Separator Assembly for Select Vacuum Cleaners | 1628439

Separator Assembly fits inside the dirt tank, for Select BISSELL Vacuum Cleaners. Click on "View Products" to ensure this Separator Assembly goes with your Vacuum. | Separator Assembly for Select Vacu more→um Cleaners | 1631288

Separator Assembly for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this Separator Assembly fits your model vacuum cleaner. The Separator Assembly is located inside the d more→irt tank and can be removed to clean by lifting the dirt tank lid and lifting it out of the tank. | Separator Assembly for Select Vacuums | 1628295

Separator Assembly in BLACK for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this fits your machine. Separator Assembly fits inside the dirt tank and twists in and out of more→the dirt tank to clean. | Separator Assembly for Select Vacuums | 1631289

NOTE: This Separator is in Sparkle Silver only. Separator Assembly fits inside the dirt tank for Select BISSELL Vacuum Cleaners including the BISSELL MultiClean Vacuum Cleaners. | Separator Assembly - more→Silver for Select Vacuums | Sparkle Silver | 1624040

Separator Assembly sits inside the Dirt Tank for the Symphony Pet All-in-One Vacuum & Steam Cleaner in Purple. Fits Series 1543. | Separator Assembly - Purple for Symphony | 1606888