Vacuum Cleaner Accessories

NOTE: There are no graphics, logo's or wording on the replacement nozzle. The Front Nozzle is found on the front of the machine; it sucks the formula and dirty water from the carpet and connects to th more→e tank bottom. If you are experiencing reduced suction, check for hair and debris clogging your nozzle. To clean, simply pop off the nozzle and remove excess dirt and de | Removable Nozzle for Upright Carpet Cleaners | 2030124

Tank Inlet Gasket for the Pet Hair Eraser 1650 Series Upright Vacuum Cleaner. | Tank Inlet Gasket for Pet Hair Eraser Vacuum | 1608828

Bottom Tank Lid for Dirt Cup for Revolution Bagless Canister Vacuum - Model 12901 | Bottom Lid for Dust Tank Revolution Canister Vacuum | 1602846

Light Bulb for Select Upright BISSELL Vacuum Cleaners. | Vacuum Light Bulb | 2031522

Stores tools on your Canister Vacuum so they do not have to be stored separately. | Tool Holster for Canister Vacuums | 1603061

Genuine BISSELL Tools - 4" Upholstery Tool for Carpet Deep Cleaners. Great for cleaning stairs, furniture and other hard to reach surfaces. Attaches to the hose of your upright or portable deep cleane more→r for use on stubborn spots and stains. Fits Upright Carpet Cleaner Models: ProHeat, ProHeat 2X and ProDry Series Compact Carpet Cleaner Models: SpotBot, SpotBot Pet, SpotBot ProHeatThe Upholstery Tool is great for carpet cleaning spills and stains on upholstery! Attaches to the hose of your upright or portable deep cleaner for use on stubborn spots and stains. | 4" Upholstery Tool for Carpet Cleaners | 2036653

Mesh Filter for Select Canister Vacuum Cleaners, including OptiClean Canister, 1989D. | Mesh Filter for Select Canister Vacuums | 1610389

Foam Filter for Select Canister Vacuums including the BISSELL Pet Hair Eraser, series 2230 and SmartClean Canister Vacuum, series 2268. To clean the filters, follow these instructions: With the Dirt T more→ank Removed, twist the top counter-clockwise and pull up to remove Remove the foam filter from the tank lid Remove the Fiber Filter from the tank lid Both filters can be rinsed to clean. Leave to dry for 24 hours before replacing Replace both filters making sure the Fiber Filter is inserted first Replace lid and turn clockwise to lock in place | Foam Filter for Select Canister Vacuums | 1618603

Foam Filter fits Select Hand Vacuums including Pet Hair Eraser Hand Vac, 2390 Series and AutoMate Hand Car Vac, 2284W Series. This filter is washable, but must be completely air dry before next use. D more→o not put in wet filters into the machine. | Foam Filter for Select Hand Vacuums | 1614212

Foam Filter for Select BISSELL Upright Vacuums. Click on "View Products" to ensure this fits your vacuum. To clean the filter, follow these steps: Press the dirt tank release button and pull away from more→vacuum. Open the tank lid by lifting up. Remove pre-motor filters from top of dirt tank lid by pulling out. Clean with mild detergent, rinse and squeeze all excess water. Allow filters to dry completely before reinserting. Return pre-motor filters to the top of the dirt tank. Put the thin flat filter with the white tab in first, then put the thick foam filter in. The lid will click into place when tank lid is closed securely. | Foam Filter for Select Upright Vacuums | 1635629

Foam Filter in Yellow for Select BISSELL Upright Vacuum Cleaners. This filter is washable. Wash in warm water and mild detergent and allow it to completely air dry prior to next use of the vacuum. It more→is recommended to change with new filters every 6 to 8 months depending on use and how often the filter is cleaned. Dirty filters will restrict the air flow and reduce suction. Keeping a clean filter will keep suction levels at optimal levels. | Foam Filter for Select Vacuums | 1610289

Old Part Number 160-6285. Fits the 1576 Series and 1683 Series machines. | Foam Filter for Super Light Stick Vacuums | 1607642

Mesh Filter Frame for Select Canister Vacuums, including OptiClean Canister Vacuum, Model 1989D. This Mesh Filter Frame is part of the Cyclone System that sits within the dirt tank. This mesh filter c more→an be rinsed off when dirty, but must be completely dry prior to next use. | Mesh Filter Frame for Select Canister Vacuums | 1613429

3-pack of foam filters for the BISSELL ICONpet Robotic Vacuum To clean and maintain the filter follow these directions: Remove the Dirt Bin. Pinch and pull filter assembly out from the back of the Dir more→t Bin. Clean filter if dirty. Replace if damaged. Separate washable filter from assembly. Wash filter and filter assembly. Let dry completely before reassembling. Open Dirt Bin, clean debris surrounding Separator Cone. If necessary, carefully twist cone and pull up to remove. | Foam Filter (3-pack) ICONpet Robotic Vacuum | 1618610

Mesh Filter Screen holds the filter for Select Stick Vacuums including Adapt Ion and PowerLifter Ion Stick Vacs, Series 2286, 2482. To clean the Filter & Screen follow these instructions: Turn the pow more→er OFF and remove the Dirt Tank Grasp filter tabs and lift up to remove the washable filter assembly from the Dirt Cup Grip the filter assembly and turn counter-clockwise and lift down to remove filter from filter screen Tap against the inside of a waste container, removing any visible dirt Replace filter back in the filter screen then turn clockwise to lock into place Attach filter assembly back into the dirt tank and attach to hand vacuum until it snaps securely in place. NOTE: You may rinse

Foam Filter with the Frame for Select Canister Vacuum Cleaners including PowerClean and MultiClean Wet/Dry Canister Vacuums, Series 2035. | Foam Filter with Frame for Select Canister Vacuums | 1613118

Flat Pump Belt for Select BISSELL Carpet Cleaners, including BISSELL PowerForce PowerBrush Pet XL Carpet Cleaner, series 3071. Follow these instructions on replacing the Belts and Brush Rolls. Unplug more→the machine. Remove both tanks. With the machine reclined, locate the belt access cover and lay the machine on its side. Remove the 3 screws on the brush access cover using a Phillips-head screwdriver. Remove the access cover to expose the cogged belt and brush roll. Remove the 2 screws on the belt access cover using a Phillips-head screwdriver. Remove the access plate to expose the flat pump belt. If flat pump belt is broken, you may gently remove it from the machine. We will replace this belt

This filter fits Series 2043 PowerGlide Lift-Off Vacuums with a Serial Number of 19076 and PRIOR. Replacement filter pack comes with 4 filters: 1 - Pre-motor Foam Filter 1 - Post-motor Pleated Media F more→ilter 1 - Pre-motor Fiber Filter (Fits Models 2763 & 9182) 1 - Pre-motor Fiber Filter (Fits Models 1305 & 1306) Foam filters are washable with mild soap and water. Air dry completely before reinstalling. Do not wash the square allergen media filter. | Replacement Filter Pack for Powerglide Vacuum Cleaners | 12118

Genuine BISSELL Belt - Pump Belt for PowerLifter, ProHeat and PowerSteamer Upright Deep Cleaner Series. You should check your machines rotating floor brush and drive belt regularly for wear or damage. more→Replace the belt if it is broken or worn. The drive belt is a critical component of your vacuum that allows the brush roll to rotate and remove deep down dirt from your carpets. The pump belt is located below the belt access door on the side of your machine. The pump belt connects to the motor shaft. Remove the worn or broken belt and loop the new pump belt around the red pulley end of the pump pulley. Stretch the new pump belt up and around the silver motor shaft. If your machine is not

Aluminum Upper Handle Assembly for the AirRam Cordless Vacuum. | Aluminum Handle Assembly for AirRam Cordless Vacuum | 1610316

Connects the pump to the motor shaft. For machines with serial numbers BEFORE 18167FXB. | Flat Pump Belt for Select Upright Carpet Cleaners | 1606428

Flat Pump Belt for Select Upright Carpet Cleaners for machines with Serial Numbers AFTER 18167FXB | Flat Pump Belt for Select Upright Carpet Cleaners | 1616370