Vacuum Cleaner Accessories

Handle Assembly for PowerLifter 2259 Series and PowerEase 2253 Series. | Handle Assembly for Select Vacuums | 1616208

Handle Assembly for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this handle assembly fits your model. To assemble the Handle Assembly, position the handle so the lower t more→ab is facing the back of the vacuum. Insert the handle into the base and push until it locks into place. | Handle Assembly for Select Vacuums | 1628293

Handle Assembly for the SteamReady Steam Mop - Model 1464. | Handle Assembly for SteamReady Steam Mop | 1604919

Replacing your Handle Assembly is easier than you might think. The handle slides into place on top of the machine, the assembly includes 2 screws to secure the handle into place. Remember to have a Ph more→illips screw driver on hand! | Handle Assembly for the ProHeat Upright Carpet Cleaners | 2144406

Upper Handle Assembly in Magenta/Blue for the Trilogy Upright Vacuum Cleaner. | Handle Assembly for Trilogy Vacuum Cleaner | 2037932

Handle Assembly for the BISSELL TurboClean Hard Floors Cleaner, series 3548. | Handle Assembly for TurboClean Hard Floors Cleaner | 1630723

Titanium Handle Assembly for 3-in-1 Stick Vacuums, Series 2030. | Handle Assembly Titanium for 3-in-1 Stick Vacuum | 1611499

Handle Assembly with screws in Titanium for Select Upright Carpet Cleaners including TurboClean, PowerClean, PowerForce PowerBrush - Series 2084, 2085, 2089. To assemble the Handle Assembly, slide upp more→er handle post into the body by aligning the pin and sliding the post down into place. Be sure to secure the upper handle before lifting. Rotate lock collar to secure. | Handle Assembly | Titanium | for Select Carpet Cleaners | 1611547

Handle Assembly in Titanium for Select BISSELL Upright Vacuum Cleaners including the BISSELL MultiClean Allergen Pet Series Vacuums. The Handle Assembly attaches to the Vacuum Base of the machine. | H more→andle Assembly - Titanium for Select Vacuums | 1624038

Handle Assembly with Screw in Silver for Select Vacuum Cleaners including PowerGlide, Series 2215. | Handle Assembly w/ Screw for Select Vacuums | 1614257

Handle Assembly with 2 screws fits Select Upright Vacuum Cleaners - CleanView Swivel Non-Rewind, Series 2252, 2316 and PowerLifter Swivel Non-Rewind, Series 2260. | Handle Assembly w/ Screws - Select more→Vacuum Cleaners | 1616189

Sole Plate for Aeroswift Compact Upright Vacuum. Fits on the bottom of the foot to hold the brush roll in place. Easily removable to have access to the brush roll and belt. | Sole Plate Assembly for A more→eroswift Compact Upright Vacuum | 1600321

Sole plate covers the brush roll on the foot of the vacuum. Holds the brush in place. Fits the Pet Hair Eraser Premium Canister Vacuum Cleaners, series 2230. | Sole Plate for Select Canister Vacuums | 1618573

Sole Plate for Select BISSELL Upright Vacuum Cleaners including; Trilogy 81M9 Series, PurePro 59G9 Series, TripleClean Professional 81M9K Series, and OptiClean 30C7 Series. Sole Plate holds the brush more→on the bottom of the machine. | Sole Plate for Select Upright Vacuums | 2031519

Collection Tank - Titanium - for Select Upright Carpet Cleaners including TurboClean, PowerClean, PowerForce PowerBrush Turbos - Series 2084, 2085, 2089. To empty the Collection Tank please follow the more→se instructions: With foot, press the red power button to turn off unit and then unplug. Release Collection Tank Latches (on each side) by pulling up from the bottom of the latch and then out Carefully remove tank by lifting up on the tank carry handle Carry the Collection Tank to the toilet or sink. To empty, pour contents using opening at back of the tank Rinse collection tank thoroughly and replace on unit Secure latches on both sides of the tank | Dirty Water Collection Tank for Select

Clean Water/Solution Tank in Blue for the ProDry Upright Carpet Cleaner. | Clean Water/Solution Tank for ProDry Carpet Cleaners | 2037207

Dirty Water Tank Assembly includes the float stack. Fits the BISSELL BARKBATH Dual Use Portable Dog Bath and Deep Cleaning System. To Empty the Dirty Water Tank, remove the dirty water tank from the m more→achine and pour out the dirty water and place back in the machine. | Dirty Water Tank Assembly BARKBATH Dual | 1622253

Dirty Water Tank Assembly in Purple for Select BISSELL Carpet Cleaners, including PowerForce PowerBrush Pet XL Carpet Cleaner, series 3071. Follow these instructions to empty the Dirty Water Tank. Pul more→l Dirty Water Tank up and away to remove. For quick empty: Pull the rubber tab (located in the middle of the tank) and tilt to pour. When closing the rubber tab, make sure all edges are sealed tight. For final clean and rinse: Unscrew the ring at the bottom of tank. Gently remove the float stack, rinse and return to the tank lining up the arrows locking into place. Return the ring and twist to lock. Clean the red filter below the Dirty Water Tank by wiping off any remaining dirt or debris. To

Clean Water Tank for the BARKBATH Dual Use Portable Dog Bath and Deep Cleaning System. | Clean Water Tank BARKBATH Dual | 1622257

Dirty Water Tank fits the BISSELL CrossWave Cordless Multi-Surface Wet Dry Vac, series 2551. | Dirty Water Tank CrossWave | 1619900

Clean Water Tank with instructions for the BARKBATH Portable Dog Grooming System. | Clean Water Tank for BARKBATH | 1611752

Clean Water Tank for BISSELL CrossWave Hard Floor Expert wet dry vacuum. To fill the Clean Tank, follow these instructions. Choose your formula. Pull clean water tank up to remove. Unscrew cap. Fill c more→lean water tank with warm water (140 F/ 60 C) to water fil line (21 fl. oz.). Add formula to the formula fill line (3 fl. oz.) Screw cap back on. Align clean water tank with grooves on back of machine and slide it until it clicks into place. | Clean Water Tank for CrossWave Hard Floor Expert | 1638379

Dirty Water Tank fits the Pet Stain Eraser Cordless Portable Carpet Cleaner. | Dirty Water Tank for Pet Stain Eraser | 1617611