Vacuum Cleaner Accessories

Clean Tank Lid for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. | Clean Tank Lid CrossWave X7 | 1626665

Dirty Tank Lid in GrapeVine Purple for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. | Dirty Tank Lid - GrapeVine Purple - CrossWave X7 | 1626680

Dirty Tank Lid for the BISSELL JetScrub Pet Carpet Cleaner, Series 2529. | Dirty Tank Lid JetScrub | 1617949

Rubber Dirty Water Tank Plug for the Pet Stain Eraser Cordless Portable Carpet Cleaner. Series 2002, 2003, 2054. Ensure the unit is OFF and set upright on a flat surface. Simply push up on the release more→button located on the top of the tank to remove. Carefully remove the dirty water tank from the unit and carry to the sink. To prevent spills, hold the tank vertically after removing. To empty pull tab at the end of the tank and empty to remove the dirty water. Rinse out the dirty tank with clean water after emptying. Clean the tank plug and return tank to the unit. Ensure the tank is secure before use. | Dirty Tank Plug for Pet Stain Eraser Portable Cleaner | 1611735

Clean Tank fits the PowerEase & Total Floors Wet/Dry Hard Floor Cleaners. | Clean Tank - PowerEase & Total Floors Wet/Dry Cleaners | 2038370

Clean Tank Receiver for Select BISSELL Carpet Cleaners. | Clean Tank Receiver | 1634222

Water Tank with the Cap and Insert for the PowerFresh Steam Mop Hard Floor Cleaners. | Water Tank w/ Cap and Insert for PowerFresh Steam Mops | 2038412

Clean Tank with the Cap for the BISSELL CrossWave Cordless Max Multi-Surface Wet/Dry Vac. To Fill the Clean Water Tank, follow these instructions: The Clean Water Tank is located on the back of the ma more→chine. To remove, use the finger groove above at the top of the tank to grab and pivot the tank backwards Unscrew the cap from the bottom of the Clean Water Tank Choose the right BISSELL formula The Clean Water tank has a Large Area volume and a Small Area volume. Pick one of the measuring volumes that best suits the space that you would like to clean. The Large Area fill lines are for areas up to 700 sq ft. The Small Area fill lines are for areas under 350 sq. ft Use warm (140F/60C max) tap

Clean Tank Assembly with Cap in Black for select BISSELL Carpet Cleaners, series 2806, 2987. Follow these directions to fill the Clean Water Tank: Remove the Clean Water Tank by lifting straight up an more→d away from the machine. Unscrew the cap at the bottom of the tank. Fill with hot (140 degree F/ 60 degree C MAX) tap water to the WATER line. Do not use boiling water. Do not heat water and/or tank in the microwave. Add BISSELL formula to the FORMULA line. Replace and tighten the cap. Replace the tank on the machine until it "clicks" into place. | Clean Tank w/ Cap - Black for Select Carpet Cleaners | 1623828

Water Tank comes with Cap and Insert for the SteamReady Steam Mop - Model 1464 | Water Tank w/ Cap & Insert for SteamReady Steam Mop | 1604920

Clean Tank for SpotClean Models 5207 series, 7786 series, 9749 series and 1570 series. Fill formula and water to specified fill lines as directed. | Clean Tank with Cap for SpotClean Carpet Cleaners | 1606553

Water Tank includes the Cap & Insert for the Lift-Off Steam Mop Hard Floor Cleaner - Series 39W7. | Water Tank with Cap & Insert for Lift-Off Steam Mop | 2032275

Clean Tank with Cap for the BISSELL JetScrub Pet Carpet Cleaner, Series 2529. Follow these instructions to properly fill the Clean Tank: NOTE: Fill with warm (140F/60C MAX) tap water and add the appro more→priate BISSELL formula. Do not use boiling water. Do not heat water or tank in microwave. The Clean Tank is on the back of the machine. Lift the tank straight up to remove from the machine Unscrew the cap from the Clean Water Tank Fill the Clean Water Tank with water and formula - with just cleaning formula, fill with hot tap water to the Water Fill Line above Carpet Cleaning. Add formula to the Formula Fill Line above Carpet Cleaning. If you're using a Boost formula additive, add one ounce too

Cord Wrap for the BISSELL CrossWave Pet Wet/Dry Vac, Series 2305, 2306, 2328. | Cord Wrap for CrossWave Pet Wet/Dry Vacuum | 1614243

Cord Wrap holds the cord organized on your machine without the tangles. Quickly releases when the machine is ready to clean. Fits the Lift-Off Upright Carpet Cleaners. | Cord Wrap for Lift-Off Carpet more→Cleaners | 2037904

Cord Wrap holds the power cord neatly on your machine. Fits the Powergroom Pet & Powerclean Upright Vacuums; Series: 92L3, 16N5, 4104. | Cord Wrap for Powergroom Pet Vacuum | 2031413

Cord Wrap keeps the cord nice and organized on your machine. This cord wrap fits ProHeat Upright Carpet Cleaners - Series 1846, 25A3. | Cord Wrap for ProHeat Upright Carpet Cleaners | 2030242

Cord Wrap for the ReadyClean Upright Carpet Cleaners. | Cord Wrap for ReadyClean Carpet Cleaners | 2035703

Cord Wrap holds the cord properly on the machine when not in use. Made for Select BISSELL Upright Carpet Cleaners. | Cord Wrap for Select Upright Carpet Cleaners | 2131154

Upper & Lower Cord Wrap for the SpotBot Portable Carpet Cleaners. | Cord Wrap (upper and lower) for SpotBot Carpet Cleaners | 2037488

Includes one cord wrap. If you need both, you need to place an order for 2. | Cord Wrap for SpotClean Carpet Cleaners | 1600037

Cord Wrap for the Total Floors Upright Bagless Vacuum - Models/Series: 61C5, 52C2, and 1617. | Cord Wrap for Total Floors Upright Vacuum | 2031722

The Cord Wrap allows you to loop your power cord around cord wraps on the site of your machine for storage purposes. It features a quick-release cord wrap. To remove the power cord quickly and easily, more→rotate the upper cord wrap towards floor, and slip the power cord off from upper cord wrap. | Cord Wrap - Black Infusion for Select ProHeat 2X Cleaners | 2036683