Vacuum Cleaner Accessories

Dirt Cup Filter Frame Base for Select Vacuums. | Dirt Cup Filter Frame Base | 2031533

Dirt Tank for the 3-in-1 Stick Vacuums, Series 2030. | Dirt Cup for 3-in-1 Stick Vacuum | 1611502

Dirt Cup for Cleanview Bagless Upright Vacuum Cleaners - Models: 3590, 3591, 8975, 8990. | Dirt Cup For Cleanview Bagless Vacuum | 2031117

Dirt Cup Assembly for the Lift-Off 2-in-1 Cordless Stick Vacuum - Model 1189. | Dirt Cup for Lift-Off 2-in-1 Cordless Stick Vacuum | 1601823

Dirt Cup for Powerforce Turbo Bagless Vacuum Cleaners: Series - 6585, 68C7, 2140, 6585, 6596. | Dirt Cup for Powerforce Bagless Vacuums | 2031274

Dirt Cup for Select BISSELL Hand Vacuums including the BISSELL AeroSlim Hand Vac, Series 29869. To empty the Dirt Cup, follow these directions: Twist Dirt Cup to remove from base. Remove Filter by pul more→ling up from Dirt Cup. Empty dirt into waste container. Separate Filters by turning clockwise and pulling up. Tap filters on side of waste container to clean out dust. When finished emptying the dirt, reassemble machine. After heavy use, clean the filter and filter cup by washing gently by hand in warm water and mild dish detergent. Rinse thoroughly and make certain it is completely dry before reinserting it. | Dirt Cup for Select Hand Vacuum | 1624404

Dirt Cup for Select Stick Vacuums including Adapt Ion and PowerLifter Pet Ion Stick Vacuums, Series 2286, 2482. | Dirt Cup for Select Stick Vacuums | 1616325

Dirt Tank fits the 3-in-1 Turbo Stick Vacuum, Series 2610. Also fits the BISSELL Featherweight PowerBrush Vacuum, series 2773. To Empty the Dirt Tank: Turn the vacuum OFF and hold it vertically, press more→ing the Dirt Tank release latch. Gently pull the Dirt Tank from the hand vacuum Grip and remove the filter Empty contents of Dirt Tank into a trash bin, and gently tap against side to remove any build up Replace Filter. Attach Dirt Tank to vacuum by securely fitting onto hand grip. Make sure Dirt Tank is correctly secured. NOTE: The Dirt Tank may be rinsed with warm water and mild detergent if needed. The Dirt Tank MUST be thoroughly dried before replacing. | Dirt Cup for Select Stick Vacuums |

Dirt Tank for the Symphony Pet All-in-One Steam & Vacuum Cleaner with a purple lid. Fits Model/Series 1543. | Dirt Cup for Symphony Pet All-in-One Steam Cleaner | 1606889

Dirt Cup for Symphony Steam Mop. | Dirt Cup for Symphony Steam Mop | 1602395

Dirt Cup - Blue for Symphony Steam Mops. | Dirt Cup for Symphony Steam Mop | 1603569

Dirt Cup for the Total Floors Upright Bagless Vacuums, Models/Series: 52C2, 61C5, and 1617. | Dirt Cup for Total Floors Upright Vacuum | 2031728

Clear Dirt Tank for Upright Vacuums - Models/Series: 92L3, 1044, and 4104. | Dirt Cup (clear) for Upright Vacuum Cleaners | 2031414

Dirt Cup in GrapeVine Purple for the Pet Hair Eraser Hand Vac, Series 2390. To properly care for your Pet Hair Eraser Hand Vac follow these instructions to properly empty your dirt tank: The dirt coll more→ection tank should be emptied before debris reaches the FULL line. Turn power OFF Hold the hand vacuum vertically and depress release button on the front to release the dirt collection tank Grasp filer tabs and pull vertically to remove filter cup and empty dirt into wast container. Replace filter back into the dirt cup and attach dirt cup to hand vacuum until it snaps securely into place. | Dirt Cup - GrapeVine Purple - Pet Hair Eraser Hand Vacuum | 1614201

Smaller Upholstery Tool for the Garage Pro, PowerClean & MultiClean Canister Vacuums. | Small Upholstery Tool for Select Canister Vacuums | 2030160

Shorten or Lengthen your reach with the Telescopic Extension Wand for Select Canister Vacuums including the Zing, 2154 & 2156C Series. | Telescopic Extension Wand for Select Canister Vacuums | 1613052

For an even further reach, use the Extension wand for the Healthy Home. Heavy Duty Upright Vacuums and along with the Pet Hair Eraser and Pet Hair Eraser Lift-Off Vacuums. | Telescoping Extension Wand more→for Select Upright Vacuums | 2031364

Dirt Cup Latch holds the Dirt Cup in place on your Pet Hair Eraser or OptiClean Canister Vacuums. | Dirt Cup Latch - Pet Hair Eraser & OptiClean Canisters | 2037288

Access Plate fits under the foot of the vacuum to hold brush in machine. Click on "View Products" to ensure this part fits your vacuum cleaner. | Access Plate | 1629212

Access Plate for SpinWave R5 Robotic Mop & Vacuum, series 3377. | Access Plate | 1631046

Access Plate for Pet Hair Eraser Lift-Off with Screws in ChaCha Lime - Series 2087. This covers the brush area on the foot of the vacuum. To remove this plate. Unplug and turn the vacuum over. Unscrew more→the 10 Phillips head screws to remove the bottom cover. This will then give you access to the brush and belt. | Access Plate - ChaCha Lime - Pet Hair Eraser Lift-Off | 1612643

Access Plate for Pet Hair Eraser Lift-Off with Screws in Disco Teal - Series 2087. This covers the brush area on the foot of the vacuum. To remove this plate. Unplug and turn the vacuum over. Unscrew more→the 10 Phillips head screws to remove the bottom cover. This will then give you access to the brush and belt. | Access Plate - Disco Teal - Pet Hair Eraser Lift-Off | 1612642

The Access Plate is located on the bottom of the foot of the vacuum to hold the brush and belt in place. Fits select Pet Hair Eraser Vacuum Cleaners, including Series - 2281, 2475, 2461. To remove the more→Access Plate, unplug and turn over the vacuum. Unscrew 10 Phillips-head screws to remove this cover. This will give you access to the brush and belt. | Access Plate for Pet Hair Eraser | 1616286